The CT15 floor scrubber is one of the most compact machines on the market, yet still offers exceptional productivity.

The CT15 has the ability to reach under desks, tables and chairs due to its adjustable handle.

 KEY FEATURES

• 13,500 square feet/ hour
• 4 Gallon Tank
• 14 inch brush drive
• Height-adjustable handle
• Easy to maneuver
• Brush Control with automatic stop
• Removable recovery tank
• High-quality performance vacuum
• 1.2 h run time for battery version

VERSATILE: The CT15 has a small, compact design which allows the scrubber to clean tight, congested areas. The scrubber works well in aisles, entryways, hallways, or other places where traditional scrubbers cannot typically fit. Its adjustable handle helps as it can be folded down in order to reach under low surfaces, such as below tables and desks.

PRODUCTIVE: Even though the CT15 is compact, productivity is not compromised. The CT15 can clean up to 13,500 square feet per hour and 20,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT15 cleans more effectively than mops and can remove much more dirt and grime than mops.

USER-FRIENDLY: The CT15 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush.

SUSTAINABLE: The CT15 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE: The CT15 is designed to withstand harsh environments. It is constructed of a high density polyethylene that helps the machine hold up. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Video

Â

Â

12 v 33 ah AGM Battery for CT15B35

*Depending on machine, may require more than one battery. Some machines can take a variety of battery, please consult your manual or contact a sales representative to make sure you have the correct battery for your machine.

*Replaces 12VD33-AGM

Â

The CT50 is a cost-effective, highly productive, and durable walk-behind scrubber
that will meet a wide range of floor care needs. With intuitive controls, best-in-class
squeegee assembly, and straightforward operation, achieving a clean floor is as simple
as turning a key

KEY FEATUES

• Compact Size
• Easy to maneuver
• Self-leveling brush head
• Cast aluminum squeegee assembly
• High quality vacuum motor
• 21,000 square feet/ hour
• 13 Gallon Tank
• 20 inch brush drive
• 2.5 hour run time

Â

Video

The CT 230 is a ride on scrubber-dryer built with versatility and robustness. You can wash large surfaces such as industrial floors, tiles or linoleum with the confidence that you have a solid and safe machine at your disposal.

 Tank and machine body are made of high quality polyethylene, the brush head is equipped with an anti-shock protection system, and the protection system of the squeegee is specially designed to absorb harsh impact.

Key Features

• Three pre-programmed work settings so the CT230 is ready to clean at the touch of a button
• Easy to drive and tight turns allowing flexibility while cleaning tighter spaces
• Great visibility due to streamlined control panel, reducing damage to both obstacles and machine
• Automatic squeegee lifts while in reverse
• Design to be quiet for use at any time
• Easy to replace brush and maintain the machine
• Comfortable design

Other FeaturesÂ

• (CFS) Central Flow System solution distribution from brush center
• Great maneuverability with its optimum weight distribution
• Designed to assure minimum noise levels
• Easy to use control panel
• Automatic stop (by pedal release) in working mode
• Battery level indicator
• Solution tank discharge hose
• Anti Foam System
• Brush replacement without tools
• Squeegee blades can be used on four sides before replacement
• Automatic squeegee lift in reverse
• Squeegee assembly without tools
• Easy access to internal compartments
• Oil bath gear reduction box

Video

 Â

Â

The CT 71 is a professional scrubber-dryer designed for cleaning floors in medium to large spaces such as warehouses, industrial warehouse and supermarkets. This walk behind scrubber is one of the few in its category to be equipped with such a wide cleaning path from the 85 cm brush head, which guarantees high productivity and makes it possible to cover more surface in less time. The high quality suction motor also ensures effective drying on all surfaces.

KEY FEATURES

• Versatility due to four interchangeable brush heads
• Self-leveling system where the brush will automatically adjust to any surface while cleaning
• Easy access to internal components with no tools needed
• 2.0 - 3.5 hour run time
• 17,000 - 27,000 square feet/ hour
• 19 gallon tank
• Ergonomic drive lever
• Adjustable handle
• Easy access to internal components
• Two pre-setting programs
• 4 interchangeable heads
• On-board charger with easy access for maintenance
• 20 inch, 24 inch and 28 inch traction

Â

INNOVATIVE: The CT71 is one of IPC’s newest machine, so it was designed to include most of IPC’s unique innovations. These include, the self-leveling system, in which the scrubber will auto-adjust to the surface being cleaned, Advanced Noise Control, which allows for quieter operation, telematic GPS that helps to keep track of your machines, and a memory card to be able to download all of the machine’s working parameters.

PRODUCTIVE: Even though the CT71 is compact, productivity is not compromised. The CT71 can clean up to 19,000 square feet per hour and 59,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT71 cleans more effectively than mops and can remove much more dirt and grime than mops.

EASE OF USE: The CT71 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush.Â

SUSTAINABLE: The CT71 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE: The CT71 is constructed of a high density polyethylene that helps hold up in tougher environments. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Â

Video

Â

Â

 Specs

Our Technology data

- Productivity - 3150 m2/h

- Batteries running time - 3.5h

- Water Tank Running Time - 705 for shift

Consumables

- Brushes

- Standard Pads

- Super Pad

- SPPV01163 - CYLINDRICAL BRUSH

CT 51 is an innovative walk behind scrubber created by IP Cleaning, designed to provide total control over the cleanup work. Thanks to its numerous features, this industrial floor cleaning machine ensures maximum productivity: up to 3150 m 2 / h, while the 3.5 hours of battery life allow you to work continuously and without interruption

KEY FEATURES

• 13/14 Gallon
  
• Available with pad driver (P) or brush (B)
• 4 interchangeable brush heads for different applications and overall easily maintenance
• Electric compartment - fully protected and easy to check.
• Integrated battery charger with easy access for maintenance
• Drive Lever with innovative design allows the user to comfortably push / pull the operating lever from any position
• Adjustable handle for a comfortable and easy use
• Full machine control thanks to an intuitive central knob
• Electronic key - turn on and off. operator id-key (opt)
• Easy access to internal components
• APC Brush reduces solution required
• Two pre-setting programs

Â

 INNOVATIVE: The CT51 is one of IPC’s newest machine, so it was designed to include most of IPC’s unique innovations. These include, the self-leveling system, in which the scrubber will auto-adjust to the surface being cleaned, Advanced Noise Control, which allows for quieter operation, telematic GPS that helps to keep track of your machines, and a memory card to be able to download all of the machine’s working parameters.

PRODUCTIVE:Â Even though the CT51 is compact, productivity is not compromised. The CT51 can clean up to 19,000 square feet per hour and 59,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT51 cleans more effectively than mops and can remove much more dirt and grime than mops.

EASE OF USE: The CT51 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush.Â

SUSTAINABLE: The CT51 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE:Â The CT51 is constructed of a high density polyethylene that helps hold up in tougher environments. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Video

Included

• Adjustable handle for a Comfortable and Easy Use
• Full machine control thanks to an intuitive central Knob
• Easy Access No Tools

Consumables

• Brushes
• Cylindrical Brushes
• Super Pad
• Squeegee Blades

Batteries and Battery Chargers

Specifications

IPC AGM Battery - BAAC00105

• Characteristics - 12V 105 Ah ( C5 )
• Dimension - 345x170x285
• Running Time - 180 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

EXIDE gel battery - BAAC00024

• Characteristics - 12V 105 Ah ( C5 )
• Dimension - 345x174x283
• Running Time - 180 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

Acid tubular plate- BAAC00136

• Characteristics - 12V 85 Ah ( C5 )
• Dimension - 308x175x225
• Running Time - 190 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

The CT 71 is a professional scrubber-dryer designed for cleaning floors in medium to large spaces such as warehouses, industrial warehouse and supermarkets. This walk behind scrubber is one of the few in its category to be equipped with such a wide cleaning path from the 85 cm brush head, which guarantees high productivity and makes it possible to cover more surface in less time. The high quality suction motor also ensures effective drying on all surfaces.

KEY FEATURES

• Versatility due to four interchangeable brush heads
• Self-leveling system where the brush will automatically adjust to any surface while cleaning
• Easy access to internal components with no tools needed
• 2.0 - 3.5 hour run time
• 17,000 - 27,000 square feet/ hour
• 19 gallon tank
• Ergonomic drive lever
• Adjustable handle
• Easy access to internal components
• Two pre-setting programs
• 4 interchangeable heads
• On-board charger with easy access for maintenance
• 20 inch, 24 inch and 28 inch traction

Â

INNOVATIVE: The CT71 is one of IPC’s newest machine, so it was designed to include most of IPC’s unique innovations. These include, the self-leveling system, in which the scrubber will auto-adjust to the surface being cleaned, Advanced Noise Control, which allows for quieter operation, telematic GPS that helps to keep track of your machines, and a memory card to be able to download all of the machine’s working parameters.

PRODUCTIVE: Even though the CT71 is compact, productivity is not compromised. The CT71 can clean up to 19,000 square feet per hour and 59,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT71 cleans more effectively than mops and can remove much more dirt and grime than mops.

EASE OF USE: The CT71 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush.Â

SUSTAINABLE: The CT71 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE: The CT71 is constructed of a high density polyethylene that helps hold up in tougher environments. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Â

Video

Â

Â

 Specs

Our Technology data

- Productivity - 3150 m2/h

- Batteries running time - 3.5h

- Water Tank Running Time - 705 for shift

Consumables

- Brushes

- Standard Pads

- Super Pad

- SPPV01163 - CYLINDRICAL BRUSH

The CT 71 is a professional scrubber-dryer designed for cleaning floors in medium to large spaces such as warehouses, industrial warehouse and supermarkets. This walk behind scrubber is one of the few in its category to be equipped with such a wide cleaning path from the 85 cm brush head, which guarantees high productivity and makes it possible to cover more surface in less time. The high quality suction motor also ensures effective drying on all surfaces.

KEY FEATURES

• Versatility due to four interchangeable brush heads
• Self-leveling system where the brush will automatically adjust to any surface while cleaning
• Easy access to internal components with no tools needed
• 2.0 - 3.5 hour run time
• 17,000 - 27,000 square feet/ hour
• 19 gallon tank
• Ergonomic drive lever
• Adjustable handle
• Easy access to internal components
• Two pre-setting programs
• 4 interchangeable heads
• On-board charger with easy access for maintenance
• 20 inch, 24 inch and 28 inch traction

Â

INNOVATIVE: The CT71 is one of IPC’s newest machine, so it was designed to include most of IPC’s unique innovations. These include, the self-leveling system, in which the scrubber will auto-adjust to the surface being cleaned, Advanced Noise Control, which allows for quieter operation, telematic GPS that helps to keep track of your machines, and a memory card to be able to download all of the machine’s working parameters.

PRODUCTIVE: Even though the CT71 is compact, productivity is not compromised. The CT71 can clean up to 19,000 square feet per hour and 59,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT71 cleans more effectively than mops and can remove much more dirt and grime than mops.

EASE OF USE: The CT71 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush.Â

SUSTAINABLE: The CT71 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE: The CT71 is constructed of a high density polyethylene that helps hold up in tougher environments. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Â

Video

Â

Â

 Specs

Our Technology data

- Productivity - 3150 m2/h

- Batteries running time - 3.5h

- Water Tank Running Time - 705 for shift

Consumables

- Brushes

- Standard Pads

- Super Pad

- SPPV01163 - CYLINDRICAL BRUSH

The CT 71 is a professional scrubber-dryer designed for cleaning floors in medium to large spaces such as warehouses, industrial warehouse and supermarkets. This walk behind scrubber is one of the few in its category to be equipped with such a wide cleaning path from the 85 cm brush head, which guarantees high productivity and makes it possible to cover more surface in less time. The high quality suction motor also ensures effective drying on all surfaces.

KEY FEATURES

• Versatility due to four interchangeable brush heads
• Self-leveling system where the brush will automatically adjust to any surface while cleaning
• Easy access to internal components with no tools needed
• 2.0 - 3.5 hour run time
• 17,000 - 27,000 square feet/ hour
• 19 gallon tank
• Ergonomic drive lever
• Adjustable handle
• Easy access to internal components
• Two pre-setting programs
• 4 interchangeable heads
• On-board charger with easy access for maintenance
• 20 inch, 24 inch and 28 inch traction

Â

INNOVATIVE: The CT71 is one of IPC’s newest machine, so it was designed to include most of IPC’s unique innovations. These include, the self-leveling system, in which the scrubber will auto-adjust to the surface being cleaned, Advanced Noise Control, which allows for quieter operation, telematic GPS that helps to keep track of your machines, and a memory card to be able to download all of the machine’s working parameters.

PRODUCTIVE: Even though the CT71 is compact, productivity is not compromised. The CT71 can clean up to 19,000 square feet per hour and 59,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT71 cleans more effectively than mops and can remove much more dirt and grime than mops.

EASE OF USE: The CT71 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush.Â

SUSTAINABLE: The CT71 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE: The CT71 is constructed of a high density polyethylene that helps hold up in tougher environments. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Â

Video

Â

Â

 Specs

Our Technology data

- Productivity - 3150 m2/h

- Batteries running time - 3.5h

- Water Tank Running Time - 705 for shift

Consumables

- Brushes

- Standard Pads

- Super Pad

- SPPV01163 - CYLINDRICAL BRUSH

CT 51 is an innovative walk behind scrubber created by IP Cleaning, designed to provide total control over the cleanup work. Thanks to its numerous features, this industrial floor cleaning machine ensures maximum productivity: up to 3150 m 2 / h, while the 3.5 hours of battery life allow you to work continuously and without interruption

KEY FEATURES

• Available in pad driver (P) or brush (B)Â
• 4 interchangeable brush heads for different applications and overall easily maintenance
• Electric compartment - fully protected and easy to check.
• Integrated battery charger with easy access for maintenance
• Drive Lever with innovative design allows the user to comfortably push / pull the operating lever from any position
• Adjustable handle for a comfortable and easy use
• Full machine control thanks to an intuitive central knob
• Electronic key - turn on and off. operator id-key (opt)
• Easy access to internal components
• APC Brush reduces solution required
• Two pre-setting programs

INNOVATIVE: The CT51 is one of IPC’s newest machine, so it was designed to include most of IPC’s unique innovations. These include, the self-leveling system, in which the scrubber will auto-adjust to the surface being cleaned, Advanced Noise Control, which allows for quieter operation, telematic GPS that helps to keep track of your machines, and a memory card to be able to download all of the machine’s working parameters.

PRODUCTIVE:Â Even though the CT51 is compact, productivity is not compromised. The CT51 can clean up to 19,000 square feet per hour and 59,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT51 cleans more effectively than mops and can remove much more dirt and grime than mops.

EASE OF USE: The CT51 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush.Â

SUSTAINABLE: The CT51 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE:Â The CT51 is constructed of a high density polyethylene that helps hold up in tougher environments. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Â

Video

Â

Â

Included

• Adjustable handle for a Comfortable and Easy Use
• Full machine control thanks to an intuitive central Knob
• Easy Access No Tools

Consumables

• Brushes
• Cylindrical Brushes
• Super Pad
• Squeegee Blades

Batteries and Battery Charger

 Specification

IPC AGM Battery - BAAC00105

• Characteristics - 12V 105 Ah ( C5 )
• Dimension - 345x170x285
• Running Time - 180 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

EXIDE gel battery - BAAC00024

• Characteristics - 12V 105 Ah ( C5 )
• Dimension - 345x174x283
• Running Time - 180 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

Acid tubular plate- BAAC00136

• Characteristics - 12V 85 Ah ( C5 )
• Dimension - 308x175x225
• Running Time - 190 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

Replacement On-Board Charger for the following machines:

• CT51BT70
• CT51ORB50
• CT71BT70
• CT71BT70
• CT71XP70HS

The CT15 floor scrubber is one of the most compact machines on the market, yet still offers exceptional productivity.

The CT15 has the ability to reach under desks, tables and chairs due to its adjustable handle.

 KEY FEATURES

• 13,500 square feet/ hour
• 4 Gallon Tank
• 14 inch brush drive
• Height-adjustable handle
• Easy to maneuver
• Brush Control with automatic stop
• Removable recovery tank
• High-quality performance vacuum

VERSATILE: The CT15 has a small, compact design which allows the scrubber to clean tight, congested areas. The scrubber works well in aisles, entryways, hallways, or other places where traditional scrubbers cannot typically fit. Its adjustable handle helps as it can be folded down in order to reach under low surfaces, such as below tables and desks.

PRODUCTIVE: Even though the CT15 is compact, productivity is not compromised. The CT15 can clean up to 13,500 square feet per hour and 20,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT15 cleans more effectively than mops and can remove much more dirt and grime than mops.

USER-FRIENDLY: The CT15 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush.

SUSTAINABLE: The CT15 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE: The CT15 is designed to withstand harsh environments. It is constructed of a high density polyethylene that helps the machine hold up. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Video

*This CT15 Has An Electric Cord*

Â

Â

CT 51 is an innovative walk behind scrubber created by IP Cleaning, designed to provide total control over the cleanup work. Thanks to its numerous features, this industrial floor cleaning machine ensures maximum productivity: up to 3150 m 2 / h, while the 3.5 hours of battery life allow you to work continuously and without interruption

KEY FEATURES

• 13/14 Gallon
  
• Available with pad driver (P) or brush (B)
• 4 interchangeable brush heads for different applications and overall easily maintenance
• Electric compartment - fully protected and easy to check.
• Integrated battery charger with easy access for maintenance
• Drive Lever with innovative design allows the user to comfortably push / pull the operating lever from any position
• Adjustable handle for a comfortable and easy use
• Full machine control thanks to an intuitive central knob
• Electronic key - turn on and off. operator id-key (opt)
• Easy access to internal components
• APC Brush reduces solution required
• Two pre-setting programs

 INNOVATIVE: The CT51 is one of IPC’s newest machine, so it was designed to include most of IPC’s unique innovations. These include, the self-leveling system, in which the scrubber will auto-adjust to the surface being cleaned, Advanced Noise Control, which allows for quieter operation, telematic GPS that helps to keep track of your machines, and a memory card to be able to download all of the machine’s working parameters.

PRODUCTIVE: Even though the CT51 is compact, productivity is not compromised. The CT51 can clean up to 19,000 square feet per hour and 59,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT51 cleans more effectively than mops and can remove much more dirt and grime than mops.

EASE OF USE: The CT51 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush. 

SUSTAINABLE: The CT51 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE: The CT51 is constructed of a high density polyethylene that helps hold up in tougher environments. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Video

Included

• Adjustable handle for a Comfortable and Easy Use
• Full machine control thanks to an intuitive central Knob
• Easy Access No Tools

Consumables

• Brushes
• Cylindrical Brushes
• Super Pad
• Squeegee Blades

Batteries and Battery Chargers

Specifications

IPC AGM Battery - BAAC00105

• Characteristics - 12V 105 Ah ( C5 )
• Dimension - 345x170x285
• Running Time - 180 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

EXIDE gel battery - BAAC00024

• Characteristics - 12V 105 Ah ( C5 )
• Dimension - 345x174x283
• Running Time - 180 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

Acid tubular plate- BAAC00136

• Characteristics - 12V 85 Ah ( C5 )
• Dimension - 308x175x225
• Running Time - 190 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

Â

CT 51 is an innovative walk behind scrubber created by IP Cleaning, designed to provide total control over the cleanup work. Thanks to its numerous features, this industrial floor cleaning machine ensures maximum productivity: up to 3150 m 2 / h, while the 3.5 hours of battery life allow you to work continuously and without interruption

KEY FEATURES

• Available with pad driver (P) or brush (B)
• 4 interchangeable brush heads for different applications and overall easily maintenance
• Electric compartment - fully protected and easy to check.
• Integrated battery charger with easy access for maintenance
• Drive Lever with innovative design allows the user to comfortably push / pull the operating lever from any position
• Adjustable handle for a comfortable and easy use
• Full machine control thanks to an intuitive central knob
• Electronic key - turn on and off. operator id-key (opt)
• Easy access to internal components
• APC Brush reduces solution required
• Two pre-setting programs

INNOVATIVE: The CT51 is one of IPC’s newest machine, so it was designed to include most of IPC’s unique innovations. These include, the self-leveling system, in which the scrubber will auto-adjust to the surface being cleaned, Advanced Noise Control, which allows for quieter operation, telematic GPS that helps to keep track of your machines, and a memory card to be able to download all of the machine’s working parameters.

PRODUCTIVE:Â Even though the CT51 is compact, productivity is not compromised. The CT51 can clean up to 19,000 square feet per hour and 59,000 square feet per charge, which is significantly faster than mopping floors. While being able to clean fast, the CT51 cleans more effectively than mops and can remove much more dirt and grime than mops.

EASE OF USE: The CT51 was designed to be very simple for its operators. It has easy controls, it isn’t difficult to maneuver and it has a spin-on, spin-off brush.Â

SUSTAINABLE: The CT51 features IPC’s Eco Select innovation where energy consumption is decreased by 20% while run time is increased by 20%. Noise level is down to 62 dB, allowing cleaning operations in noise-sensitive environments.

DURABLE:Â The CT51 is constructed of a high density polyethylene that helps hold up in tougher environments. The panel control switches are protected against water and humidity and the squeegee system is designed to absorb harsh impact.

Video

Included

• Adjustable handle for a Comfortable and Easy Use
• Full machine control thanks to an intuitive central Knob
• Easy Access No Tools
• Consumables
• Brushes
• Cylindrical Brushes
• Super Pad
• Squeegee Blades
• Batteries and Battery Chargers
• IPC AGM Battery - BAAC00105

Specifications

• Characteristics - 12V 105 Ah ( C5 )
• Dimension - 345x170x285
• Running Time - 180 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

EXIDE gel battery - BAAC00024

• Characteristics - 12V 105 Ah ( C5 )
• Dimension - 345x174x283
• Running Time - 180 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133

Acid tubular plate- BAAC00136

• Characteristics - 12V 85 Ah ( C5 )
• Dimension - 308x175x225
• Running Time - 190 min
• Battery Charges- On board battery charger 24V 10 Ah - KTRI0480 Stand alone high frequency BLS010 - BACA00133