The Mosmatic Allrounder Surface Cleaner FL-AER 300 is a compact, high-performance cleaning tool built for precision work in tight or hard-to-reach areas. Designed for both indoor and outdoor applications, this lightweight unit offers professional cleaning power with a built-in recovery system that allows you to reclaim, recycle, or discharge wastewater using a vacuum system.

Equipped with Mosmatic’s proven toggle swivel joint for angled and vertical surface cleaning, the FL-AER 300 ensures fatigue-free operation. Its high-rpm KDYF swivel, precision-balanced rotor arms, and premium stainless steel construction make it exceptionally durable and efficient. With a 12" cleaning path and a pressure capacity of up to 4000 PSI, it delivers professional-grade results in a compact form.

Applications

• Precision cleaning in tight or confined areas

• Vertical surface cleaning such as walls and risers

• Commercial restrooms, kitchens, and food prep areas

• Stairs, curbs, and detailed concrete surfaces

• Light-duty exterior and landscape cleaning

Features

• Integrated fluid recovery system with dual-wall housing for optimized vacuum power

• Toggle swivel joint allows vertical and angled surface cleaning with adjustable movement

• KDYF high-rpm stainless steel swivel with self-lubricated ball bearings

• Dual spring-based carbide seal system for long-term, leak-free operation

• Two 1/8" NPTF rotor arms, precision-welded and balanced, rated up to 4000 PSI

• Includes 2 HP nozzles, 1 HP gun, and three 2 1/4" stainless steel casters

• 12" cleaning diameter for controlled, efficient surface coverage

• Rated up to 4000 PSI and 250°F for high-pressure, high-temperature cleaning tasks

Video

Included

Swivel: 1 x KDYF - Part No: 58.908

Rotor Arm: 2 x 1/8" NPTF - 2w3 Rotor Arm 10" - Part No: 82.623

HP Nozzles: 2 x HP Nozzle 1/8" - Part No: 1503

HP Gun: 1 x HP Gun - Part No: 29.081

Caster: 3 x Stainless Steel Caster 2 1/4" Ø - Part No: 80.943

Specs

Pressure: 4000 psi

Temperature: 250°F

Thread In: 3/8" NPTF

Thread Out (for nozzles): 1/8" NPTF

Diameter: 12"

Weight: 12.3lbs

The Mosmatic HP Gun <Neo> - 29.081 is built for high-demand cleaning environments where performance, durability, and user comfort are critical. Designed with an ergonomic grip, this gun features advanced Low Trigger Force technology—reducing holding force by 90% and trigger effort by 40%—helping minimize operator fatigue during extended use. Engineered to handle extreme conditions, it supports a maximum pressure of 5000 PSI and a temperature rating up to 300°F. With a 3/8” NPTF inlet and a 1/4” NPTF outlet, this gun delivers secure, professional-grade connections for consistent, long-lasting performance.

Applications

• Industrial and heavy-duty pressure washing

• Commercial fleet and vehicle cleaning

• Equipment and machinery maintenance

• Agricultural and farm operations

• Construction site cleaning tasks

Features

• Ergonomically molded handle for comfort and control

• Low Trigger Force: 90% reduced holding, 40% less trigger effort

• High pressure capacity up to 5000 PSI

• Withstands temperatures up to 300°F

• Thread Inlet: 3/8” NPTF

• Thread Outlet: 1/4” NPTF

• Rugged design for professional and industrial use

Specs 

Pressure: 5000 psi

Temperature: 300°F

Weep Function: No

Low Trigger Force: Yes

Groove: No

Swivel: No

Thread In: 3/8" NPTF

Thread Out: 1/4" NPTF

Color: Purple

Weight: 1.3lbs

The Mosmatic 70.015 High-Pressure Quick Connect Coupler is engineered to provide a secure, leak-free connection in high-pressure cleaning systems. Constructed from premium stainless steel, this coupling ensures long-lasting performance and corrosion resistance in demanding industrial and commercial environments.

Designed for quick and easy assembly and disassembly of spray guns, lances, and hoses, it streamlines workflow and reduces equipment downtime. With a 1/4" NPTF thread, 0.47" diameter, and 1/4" nominal width (NW), this coupling delivers precision fit and optimal flow. A wrench size (SW) of 0.87" and pressure rating of 5000 PSI make it ideal for high-performance cleaning setups.

Applications

• High-pressure cleaning systems

• Pressure washer guns, wands, and hose connections

• Commercial and industrial wash operations

• Quick equipment setup and changeover

Key Features

• Made from durable stainless steel for corrosion resistance

• 1/4" NPTF thread with 0.47" diameter and 1/4" nominal width (NW)

• Wrench Size (SW): 0.87"

• Pressure Rating: Up to 5000 PSI

• Enables quick connection and disconnection of hoses and tools

• Ideal for safe and tight sealing in high-pressure applications

Specs 

Material Type: Stainless Steel

Pressure: 5000psi

Thread: 1/4"

Nominal Width (NW): 1/4"

Wrench Size (SW): 0.87"

Diameter: 0.47"

Weight - 2.10 lbs 

If you have broken the pipes on your Mosmatic 6" fixed pipe duct cleaner this is the replacement part.

This is NOT the full Duct Cleaner, just the replacement head.

The Mosmatic 901.024 Protection Plate is purpose-built for use with Mosmatic 20-inch duct cleaners, providing essential protection for internal components during operation. Made from high-grade stainless steel, this durable plate helps safeguard your duct cleaner from impact and abrasion during high-pressure cleaning tasks.

Featuring a center hole and a zip-tie mounting system, it attaches securely to the duct cleaner cage, helping extend the life of your equipment while maintaining cleaning efficiency in demanding environments.

Applications

• Compatible with Mosmatic 20-inch duct cleaners

• Commercial and industrial duct cleaning systems

• HVAC, exhaust, and ventilation maintenance

• High-pressure rotary duct cleaning applications

Key Features

• Designed for 20" Mosmatic duct cleaning equipment

• Made from stainless steel for durability and corrosion resistance

• Center hole ensures proper fit and alignment

• Zip-tie installation for quick and secure mounting

• Protects internal components from debris and impact

• Ideal for extending equipment lifespan in tough environments

Specs 

Material Type: Stainless Steel

Diameter (D): 20"

Weight: 4.6lbs 

Mosmatic Manifold arm SS TRA-2f 12" Diameter G3/8"F 2x1/8"NPT-F (Duct Spinner Replacement Head) 900.572

The Mosmatic Duct Cleaner TYR-2s - 81.526 - Adjustable provides high-performance, maintenance-free cleaning for ducts, vent hoods, trash chutes, pipes, totes, manholes, and a variety of containers. This self-rotating cleaning unit features a stainless steel rotating head protected by a robust cage, ensuring safe and precise high-pressure spray distribution for thorough, effective cleaning.

The adjustable arms allow for different spray angles, making this cleaner perfect for horizontal ducts and tanks, as well as confined or hard-to-reach spaces. Equipped with two arms and dual nozzle connections, the TYR-2s delivers consistent cleaning results while maintaining a compact design for simple and fast installation. Built to withstand up to 4000 psi and 250°F, this duct cleaner is engineered for reliable use in industrial, commercial, and municipal environments.

Important: Do not use unprotected! 

2 x ⅛” Nozzles not included

Applications

• Duct and ventilation hood cleaning

• Trash chute and pipe cleaning

• Tote and container washing

• Manhole interior cleaning

• Tank cleaning and horizontal duct maintenance

• Industrial and food processing equipment cleaning

Features

• Self-Rotating, Maintenance-Free Design: Ensures effective, hands-free cleaning with consistent spray performance.

• Adjustable Arms for Variable Spray Angles: Perfect for horizontal ducts, tanks, and tight spaces.

• Two Arms with Dual Nozzle Connections: Provides optimal coverage (requires two ⅛” nozzles, not included).

• Protective Stainless Steel Cage: Safely directs the high-pressure spray and protects the rotating head.

• High Pressure & Temperature Capacity: Supports operation up to 4000 psi and 250°F with a maximum speed of 2000 rpm.

• Durable Stainless Steel Construction: 6” diameter and 2.8” height for compact, heavy-duty use.

• Chemical Compatibility: Works with throughput mediums from pH 3–12 for flexibility with various cleaning solutions.

• 3/8” NPTF Thread Inlet: Ensures a stable and secure connection for high-flow operation.

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: 2000

Material Type:  Stainless steel

Throughput/medium: ph 3-12 

Thread In: 3/8" NPTF

Thread Out (for nozzles): 2 x ⅛”

Diameter: 6"

Height: 2.8"

Weight: 2.2 lbs.

The Mosmatic 55.163 DYCI Swivel is a premium stainless steel swivel built for high-flow, high-pressure, self-rotating applications such as surface cleaners and parts washers. Precision-engineered for performance and durability, this swivel is ideal for use in commercial and industrial cleaning systems.

It features a triple bearing system - comprising two radial ball bearings and one thrust ball bearing - for stable, smooth rotation. A carbide seal system ensures long-lasting sealing performance, while integrated weep holes provide early warning in the event of seal failure. With a pressure capacity of 5000 PSI, it’s designed to operate efficiently at up to 2000 RPM and 250°F, delivering consistent, high-performance rotation.

Applications

• High-pressure surface cleaners

• Self-rotating cleaning nozzles and tools

• Industrial parts washers

• Automated or robotic cleaning systems

• Commercial pressure washing setups

Key Features

• Thread In: 3/8" NPT Female

• Thread Out: G3/8" Male

• Material: Full stainless steel construction

• Triple Bearing System: Includes 2 radial and 1 thrust bearing

• Seal System: Durable carbide seal for high-pressure performance

• Weep Holes: Built-in for early seal failure detection

• High Pressure & Speed Rated: 5000 PSI / 2000 RPM

• Temperature Resistant: Up to 250°F

• Compact & Reliable: Efficient form factor with dual wrench flats

Specs

Pressure: 5000 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Carbide
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: 3/8" NPTF
Thread Out: G3/8" M
Nominal Width (NW): 1/4"
Wrench Size (SW1): 0.87"
Wrench Size (SW2): 0.63"
Diameter (D1): 2.36"
Diameter (D2): 1.10"
Length 1 (L1): 2.28"
Length 2 (L2): 1.46"
Length 3 (L3): 0.47"
Length 4 (L4): 0.12"
Weight: 23.0 oz

The Mosmatic 70.025 High-Pressure Quick Connect Plug offers a reliable and efficient solution for building tight, leak-free connections in high-pressure cleaning systems. Manufactured from premium stainless steel, it ensures durability and corrosion resistance in demanding environments.

This female-threaded plug features a 1/4" NPTF thread, 0.47" diameter, and 1/4" nominal width (NW), allowing quick assembly and disassembly of hoses, guns, and wands. Its compact wrench size (SW) of 0.67" and 5000 PSI pressure rating make it ideal for heavy-duty industrial and commercial cleaning applications where speed and security are essential.

Applications

• Quick-connect fittings for pressure washer guns and hoses

• Industrial and commercial cleaning systems

• Car wash equipment and surface cleaners

• Spray lance and wand integration

Key Features

• Made from 100% stainless steel for strength and corrosion protection

• 1/4" NPTF thread, 0.47" diameter, and 1/4" nominal width (NW)

• Wrench Size (SW): 0.67"

• Rated for up to 5000 PSI

• Enables fast and secure equipment connection

• Ideal for quick-change setups in pressure washing systems

Specs 

Material Type: Stainless Steel

Pressure: 5000psi

Thread: 1/4" NPTF

Nominal Width (NW): 1/4"

Wrench Size (SW): 0.67"

Diameter: 0.47"

Weight: 1oz

The Mosmatic Ceiling Boom DKP (66.019) is a durable, straight-arm ceiling boom engineered for a wide range of industrial applications. With a length of 5 ft 3 in, this boom offers 360° smooth rotation and features a sealed bearing design that ensures maintenance-free, long-lasting operation—even in high-demand environments.

Rated for up to 4000 PSI and temperatures up to 250°F, it is compatible with water, oil, and air (pH 3–12), and includes 3/8" NPTF inlets (top and side) and a 3/8" outlet. Whether used in car washes, food processing, manufacturing, or mining, the DKP boom delivers efficient fluid and air handling while maintaining environmental responsibility.

Applications

• Car wash bays and detailing centers

• Food and beverage production facilities

• Industrial manufacturing operations

• Mining and material transport sites

• Air, water, and chemical distribution systems

Key Features

• 5 ft 3 in straight ceiling boom with 360° rotation

• Sealed bearing design for smooth, durable use

• 3/8" NPTF top and side inlets + 3/8" outlet

• Rated for 4000 PSI and 250°F

• Compatible with water, oil, and air (pH 3–12)

• Suitable for a wide range of industrial sectors

• Eco-friendly and low-maintenance construction

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

Thread In: 3/8" NPTF

Thread Out: 3/8" NPTF

Lenght: 5'3"

Throughput/medium: water, oil, air at pH 3-12 

Weight: 22 lbs

The Mosmatic DXGI Swivel 37.168 is a high-precision stainless steel swivel engineered for high-RPM, self-rotating cleaning systems. Ideal for surface cleaners, parts washers, and tire cleaning applications, this swivel offers exceptional corrosion resistance, leak protection, and smooth performance. It features a triple bearing system—two radial ball bearings and one thrust ball bearing—for stable and efficient rotation. A ceramic seal system ensures long-lasting, leak-free operation under pressure. With a secure bulkhead mounting design and maintenance-free construction, the DXGI 37.168 delivers industrial-grade reliability for the most demanding environments.

Applications

• Surface cleaners

• Parts washers

• Tire and wheel cleaning tools

• Self-rotating, high-RPM cleaning systems

• Industrial and commercial pressure washing equipmentv

Key Features

• Corrosion-resistant stainless steel body

• Triple bearing system: 2x radial, 1x thrust ball bearing

• Ceramic seal system for superior leak protection

• Designed for high-RPM, self-rotating cleaning tools

• Maintenance-free performance

• Bulkhead fitting for secure, fixed installation

• Thread IN: 3/8" NPTF | Thread OUT: G3/8” M

• Max Pressure: 2500 PSI (17 MPa)

• Max RPM: 2000

• Temperature Range: 40°F – 250°F

• Overall Diameter: 1.42”

• Overall Length: 3.14”

• Nominal Width (NW): 1/4”

• Wrench Size (SW): 0.87”

Specs 

Pressure: 2500 psi (17 MPa)

Temperature: 40°- 250°

RPM: max 2,000 rpm

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: Ceramic

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8” NPTF

Thread Out: G2 G3/8”M

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Wrench Size 3 (SW3): 1.42"

Diameter (D) (overall diameter): 1.42"

Length 1 (L1) (overall length) : 3.14"

Length 2 (L2): 0.39"

Weight: 9.7 oz

The Mosmatic DGV Hydraulic 32.926 is a high-performance, brass, nickel-plated hydraulic swivel engineered for use in high-pressure hose connections, HP-Guns, and hydraulic applications. Designed with 3/4" JIC Male to Female threads, this compact and durable fitting supports live rotation under full pressure, improving hose maneuverability and protecting against wear from twisting. It features a single thrust ball bearing, O-ring NBR seal system (upgradable to EBDM or FKM), and stainless steel internals, offering exceptional corrosion resistance and maintenance-free performance.

Applications

• High-pressure gun and hose systems

• Hydraulic lines and fittings

• Industrial pressure washers

• Commercial cleaning equipment

• Tangle-free hose reel assemblies

Features

• Type: Hydraulic Swivel Connector

• Material: Brass, nickel plated with stainless steel internals

• Thread IN: 3/4" JIC Male

• Thread OUT: 3/4" JIC Female

• Overall Length: 2.71”

• Nominal Width (NW): 3/8”

• Wrench Size (SW): 1.00”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Seal: NBR O-ring (optional EBDM/FKM)

• Benefits: Corrosion resistant, low-torque rotation, and maintenance free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"JIC M

Thread Out: G2  3/4" JIC F 

Nominal Width (NW): 3/8”

Wrench Size 1 (SW1): 1.00"

Wrench Size 2 (SW2): 1.00"

Length 1 (L1) (overall length) : 2.71"

Length 2 (L2): 0.67"

Weight: 6.0 oz

The Mosmatic 26.980 lance is a 30-inch professional wand with a straight grip, built for performance and durability in demanding wash bay environments. It features high-quality stainless steel construction and precision threading, delivering long service life and superior functionality in commercial and industrial pressure washer systems.

The lance is designed with an 8" straight handle for firm grip and control, allowing comfortable handling during continuous operation. Its modular design includes a stainless steel body and integrated threading options, compatible with a wide range of accessories. Built for longevity and reliability, it meets the Mosmatic standard of craftsmanship.

This model has a 1/4" NPT male inlet and a dual-threaded outlet (G3/8" male + 1/8" NPTF), offering broad compatibility and flexible setup for high-pressure spray applications.

Applications:

• Wash bays and automotive cleaning

• Equipment and machinery maintenance

• Industrial sanitation

• Fleet and trailer washing

Features:

• Straight 8" grip for stable and controlled operation

• 30" total lance length for comfortable mid-range use

• Precision-machined stainless steel for corrosion resistance

• Dual-thread outlet (G3/8" M + 1/8" NPTF) for accessory compatibility

• Delivered fully assembled and installation-ready

Specs:

Product Type: Lance
Category: HP Wands
Brand: Mosmatic
Part Number: 26.980
Material: Stainless Steel
Nominal: 1/4"
Pressure: 4000 PSI
Temperature: 250°F max
Threading In: 1/4" NPTM
Threading Out: G3/8" M + 1/8" NPTF
Weight: 1.1 lbs