ROOF WAND™

Until now, roof cleaning has always been a job that presents many challenges, either with costly forms of safe access, with the hire of scaffolding or powered access, and once you have gained access, the need to remove moss or lichen, before applying a biocide to kill the organic life living on there.

The NEW Ionic Roof Wand ™ offers a safe form of access that allows the operative to work from the safety of the ground, to not only remove moss and lichen, but leave the tiles clean and the roof looking like new.

The uniquely patented, high pressure Roof Wand ™ with turbo nozzles, allows for fast coverage of cleaning. The nozzles rotate at high speed to increase both the intensity and cleaning area of the spray.

As water is forced down onto the surface, it creates a hovering action which allows the operative to easily direct and control to wash down a roof.

The Roof Wand ™ is used with a telescopic mast, that allows the operative to gain access over roofs and difficult to access areas with ease and with limited effort.

Key Features: 

• Innovative design enables safe working from the ground.
• Roof Wand offers an all-in-one, safe alternative to pre-existing methods.
• One price, for life. Eliminate the need for renting costly access equipment.
• 27 ft vertical adjustment
• 30° Horizontal Adjustment

• Remote control

Components:

The three components that make up this solution are:

• Trolley 
• Mast
• Pole Kit

For the trolley there are two options available:  Pumped and non-pumped. The pumped version allows the operator to use the trolley as a pure water reservoir for window cleaning.  Pure water production system not included.

PLEASE NOTE: Pressure Washer (not included)

The ideal pressure washer will be approximately 3000 psi, 5 GPM and the roof wand will reach approximately 60 ft high.

Videos

Included

• Trolley (pumped or non-pumped)
• Mast
• Pole Kit- Pole, Nozzles & Connectors

PLEASE NOTE: This does not include a pressure washer. If you do not currently own one then you will need to purchase one. Pressure Washer specifications should be a minimum of 3000psi and 5 Gallons Per Minute (GPM).

The trolley is supplied with a 12v 22amp hour battery that will need connecting under the black cover (remove the screws to access the battery). The battery needs to be charged after every use using a 110v battery charger supplied. The remote FOB will also require charging after every use, this just plugs into a USB port using the short black cable provided.

Specifications

• Length of Roof Wand: 59 ft 1 in (18M)
• Length of individual poles for Roof Wand: 6ft 7in (2M)
• Length of Roof Mast
• Section 1: 202.6cm
• Section 2: 161.6cm
• Section 3: 157.7cm
• Section 4: 153.8cm
• Section 5: 149.7cm
• Section 6: 145.7cm
• Section 7: 141.4cm
• Mast Trolley uses transverse clamps
• Roof Wand uses 2 transverse clamps on the handle sections and the rest are push fit
• Fitting between Roof Wand pole and Roof Mast is a high pressure hydraulic type hose rated at 2500psi
• Pole fitting: Hose and trigger assembly connectors are TST series 165.5 inch

Manuals

Roof Wand User Manual

The Skyscraper Head.

If you need to replace your existing Skyscraper Head or want a spare on hand, then look no further! Attach your preferred Skyscraper Blade or Speedi Brush to the Head for fast and effective moss removal from the safety of the ground, when used with a high reach pole!

Customised Cleaning:

The Skyscraper Head is multi-directional and adjustable to suit the angle of the roof. Simply adjust the locking lever and angle crank. Tilt the Head to accommodate your working angle- this is particularly useful on sloped roofs such as dormer windows!

The Skyscraper Head makes it easy to swap between your brushes and blades. Simply slot your selected tool into the head, then insert and tighten the screws and nuts with the included spanners and Alan keys to hold it in place!

Compatibility:

The Skyscraper head is fully compatible with the SkyScraper Pole and Sky Pole. If you are using the Elite High Reach Poles, then you will need the Elite Multi Connector. (These items are Sold Separately. Click link to purchase). 

*PLEASE NOTE: THIS LISTING IS FOR THE SKYSCRAPER HEAD ONLY. SKYSCRAPER BLADES, BRUSHES, AND HIGH REACH CLEANING POLES ARE ALL SOLD SEPARATELY.

Video

Included Items

• SkyScraper Head

Optional: Add the SkyVac Elite Multi Connector to adapt it to your SkyVac®️ Elite Poles

Specifications

• SkyScraper head with blade weighs approximately 12 oz (334 grams)
• Dimension: (L x D x H): 14.5 x 12 x 4.5 cm

The SkyVac®️ SkyScraper is an efficient moss removal system which eliminates the danger of climbing on roofs to remove unsightly moss.

Simply select the blade to suit the roof tile profile, attach it to your SkyVac®️ Elite Poles using the SkyVac®️ Elite Multi Connector or you can attach it to a separate Skyscraper Pole or SkyPole telescopic pole and position at the top of the roof and pull down towards you to quickly and effectively remove moss. Of the two types of poles,  It's most optimal being used with a SkyPole or alternate telescopic water fed style pole.

It is compatible with a wide variety of telescopic poles. (SkyScraper Branded Pole Package or SkyScraper SkyPole Telescopic Pole Package). 

Please note: This product listing does not include the telescopic pole or multi connector

Features & Benefits

• Easy to use locking mechanism to swap blades over quickly
• Adjustable crank to suit gradient of roof
• Adjustable multi-directional head to suit the roof angle and to allow moss removal from dormer window roofs

Video

Included Items

• SkyScraper Head
• Selection of Eleven Blades for a variety of roof tile profiles
• 1 x SkyScraper Roof Cleaning Brush

Optional: Add the SkyVac Elite Multi Connector to adapt it to your SkyVac®️ Elite Poles

Specifications

• SkyScraper head with blade weighs approximately 14 oz (400 grams)
• Roof Cleaning Brush
• Height: 2.2in (55mm)
• Length: 6.9in (176mm)
• Depth: 2.5in (65mm)

Pack of 10 Brushes For Roof Moss Removal

THE BRAND NEW SKYSCRAPER SPEEDI BRUSHES:  The NEW profiled Speedi Brushes fit ten different roof tile profiles, to reach into every nook and cranny! The tough polypropylene bristles easily dislodge roof moss within seconds.

SKYSCRAPER HEAD: The Skyscraper Roof Cleaning System makes it easy to swap brushes over when necessary. The brushes are attached to the Skyscraper Head, which can then be attached to your high level cleaning pole!

EXTRA WIDE FOR EASY COVERAGE: Complete roof cleans in record time with these brushes, dislodging every crumb of moss quickly and efficiently.

UPGRADE YOUR SKYSCRAPER SYSTEM: The Skyscraper head is fully compatible with the SkyScraper Pole and Sky Pole. If you are using the Elite High Reach Poles, then you will need the Elite Multi Connector. (These items are Sold Separately. Click link to purchase). 

Video

Included Items

Skyscraper Speedi Brushes (pack of 10)

• 1 x Marley Double Roman
• 1 x Marley Ludlow Major
• 1 x Marley Ludlow Plus
• 1 x Marley Mendip
• 1 x Marley Wessex
• 1 x Redland Regent
• 1 x Redland Grovesbury
• 1 x Redland Renown
• 1 x Anchor Bold Roll
• 1 x Flat

Package also includes:

 1 x Skyscraper Head

1 x Skyscraper Bag

Optional: Add the SkyVac Elite Multi Connector to adapt it to your SkyVac®️ Elite Poles

Specifications

• Weight: 180g per blade
  
• Material: Polypropylene
• Dimensions (L x W x H) cm : 29.5 x 1.5 x 10 

The SkyVac®️ SkyScraper is the world's most efficient moss removal system which eliminates the danger of climbing on roofs to remove unsightly moss.

Here you can choose one of three telescopic SkyPoles to be bundled with your SkyScraper. Please choose a 24ft, 34ft, or 44ft reach sized pole.

Simply select the blade to suit the roof tile profile, attach it to a telescopic pole (like the SkyPole) position at the top of the roof and pull down towards you to quickly and effectively remove moss.

Features & Benefits

• Easy to use locking mechanism to swap blades over quickly
• Adjustable crank to suit gradient of roof
• Adjustable multi-directional head to suit the roof angle and to allow moss removal from dormer window roofs

Video

 Included Items

• SkyScraper Head
• Eleven blade types for a variety of roof tile profiles
• x1 Telescopic Pole (Please choose in drop down menu)

Specifications

SkyScraper head with blade weighs approximately 14oz (400 grams)

Pole weighs:

24 foot - 3.6 pounds, collapsed length 5.3 feet, 50% carbon fiber

34 foot - 5.5 pounds, collapsed length 6.4 feet, 100% carbon fiber

44 foot - 6.9 pounds, collapsed length 7.1 feet, 100% carbon fiber

“Is there anything that I can use to get moss at the edge of a roof tile?”

YES!  Our NEW Skyscraper® wire roof cleaning brush is exactly what you need.  The carbon steel bristles get right in the tile edges and overhangs, giving that stubborn moss build off, the brush off.  For thorough results, and getting moss out of those nooks and crannies, this brush is a must. 

The Skyscraper® Wire Brush can be attached to a telescopic pole using the angled connector (provided). It can also be attached to the SkyVac®️ Elite Poles using the SkyVac®️ Elite Multi Connector.

How do I clean the roof tiles?

To clean roof tiles, we recommend the Skyscraper® Head and Blades - which has a choice of 11 blade profiles to match the shape of your roof tile project AND includes the brush.

Attach the Skyscraper® Head and Blades, or the Wire Roof Cleaning brush to a telescopic pole to access your roof cleaning project.

Where is the roof brush useful?
The stiff wire bristles mean you can access areas that can’t be thoroughly cleaned with the bladed system – such as edges, joins and overlaps.

1) Ridge Tile: A common site of moss build up.

2) Roof Gable or Rake / Drip Edge of Dormer windows: Crumbs can form on the tiles at the outer edge of the roofs or Dormer windows.

3) Valley Gutter Edging: Prone to moss build up as rain runs into the gutter.

4) Around the Chimney and the flashing.

Video

This video shows the SkyScraper Tool. The Wire Brush in this listing works similarly as it attaches to your Elite Poles or Telescoping Pole.

Included Items

• 1 x Wire Brush
• 1 x Angle Connector (Euro Thread) (if chosen)

Specifications

• (H)2in (L)7in (D)3in
• Weight: .6 lbs
• Carbon steel bristles 
• Soft grip polypropylene
• Brush head fits angle adaptor 

Introducing the all new SkySweeper and Hybrid SkySweeper!

Choose between 100% steel bristles or a hybrid mix of steel and polypropylene bristles, for the ultimate roof cleaning experience.

KEY FEATURES:

• Long lasting bristles.
• Extra wide, for easy coverage.
• Made of tough material, for a thorough clean.

How do you use it?

Simply attach the SkySweeper / Hybrid SkySweeper to your SkyScraper Head and away you go!

What is the SkySweeper compatible with?

This product will fit onto our SkyScraper Head, to be used in conjunction with our telescopic poles.

Please note the SkyScraper Head is sold separately, and can be purchased here: SkyScraper® Head & Blades