Cleaning Agents

• Keep all tanks and lines free of hard water and chemical build up
• Improve pump life
• Minimize acid corrosion and lime scale build up for maximum performance and pressure
• Keep heater(s) running at maximum temperature

1. Mix 1-quart 3601 System Maintainer with 1-quart of warm water.
2. After thoroughly mixing, pour this solution into the solution tank.
3. Turn the pump on FIRST, and run solution through your cleaning tool.
4. Next, turn on the heater. If the heater is turned on first, it will result in a vapor lock, which will affect the machine’s operation.
5. Next, with both the pump and heater on, begin running the solution through the machine. This allows the solution to break down any build up in the lines.
6. After running all of the solution through the machine, fill the tank with clean, warm water. Run the water through the machine to clear the solution completely out of the tank & lines.

Size
Twelve 1-quart bottles per case

For Use with
All hot and cold water extractors, sprayers, injectors, etc.

Apply
Weekly

Shipping weight
30 lbs.

ORBOT Environ HP Encapsulation Carpet Cleaner concentrate is a green encapsulation cleaner used with all models of the ORBOT orbital cleaning machines. this cleaning agent attains:

• Tremendous soil extraction
• Fast drying times
• No reoccurring stains
• Healthier environment for homes and commercial settings

How Environ HP Works with Orbital Drive Technology
Most dry soil in a commercial or residential carpet can be readily removed by routine dry vacuuming. However, it’s the oily and sticky soils that attract and hold dry soil to the carpet fibers. The result is a dull, gray and ugly appearance. To effectively remove these soil particles from the carpet fibers, the right amount of agitation is needed. Orbital drive technology is the answer.

The orbital drive of the ORBOT generates hundreds of small oscillations that spin at roughly 1725 revolutions per minute. This orbital drive pattern allows for all sides of the carpet fibers to be agitated and therefore all of the soil will be effectively removed from the carpet fiber. To ensure that the agitated soil will not stick to the carpet fiber again, a polymer is needed to trap and encapsulate these soil particles. The polymer element in ENVIRON HP will form distinct crystals when it dries. These crystals are the principle vehicles that stop wicking or the reoccurring of stains. They also enable the soil particles to be extracted through post-vacuuming while keeping carpets cleaner for longer periods of time.

Application: Used as traffic lane pre spray, combined with bonnet pad cleaner, hot water extraction boost /rinse detergent, upholstery cleaner and tile and grout cleaner

Included Items

Choose size from drop down menu

x4 1 Gallon Containers of Environ HP Cleaner

or

X12 1 Quart Containers of Environ HP Cleaner

Specifications

• Boiling Point: >= 212 deg F
• Color : Opaque White
• Composition : zinc(2+), tetraammine, (T-4), carbonate (1:1), hydrogen peroxide, d-glucopyranose, oligomeric, decyl octyl glycosides, d-glucopyranose, oligomeric, C10-16-alkyl glycosides
• Container Size : 1 gal
• Density : 8.67 lb/gal
• Form : Liquid
• Fragrance : Lemon
• Item : Carpet Cleaner
• Specific Gravity : 1.04
• Sub Brand : Environ HP
• Type : Encapsulation
• VOC Content : 0 g/L
• pH Rating : 5 - 6Floor Types

Carpet
The Orbot low-moisture system has been engineered to clean any type of carpet, in any situation and also leave it as dry as possible so it is ready to use immediately.

Have you ever walked into an airport, hotel hallway or room, and smelled a dingy humid scent because the carpet had been recently cleaned and over-wet? Did you see a number of fans blowing on the floor? Was the carpet truly clean or was it still gray and dull in appearance? Are these signs of a healthy, clean, and safe environment?

The ORBOT system was designed in mind to support a healthy indoor environment. Carpets will simply be clean, vibrant in color, and dry within minutes. The system will eliminate the most common problems caused by other cleaning methods that lead to mold growth, mildew, volatile organic compounds (VOC), insufficient drying times, recurring stains, and safety hazards.

ORBOT's unique low-moisture system uses 10 times less the amount of water opposed to other water extraction methods. Therefore, over-wet carpets will never be an issue. The problems associated with over-wet carpets are intensified in a heavily used setting. Over-wet carpets require longer drying times. This can cause large sections of a building to be blocked off for extended periods of time. Especially in a school, hospital, or commercial building this can lead to serious safety issues. People walking from a wet or damp carpet directly onto a hard-surface floor can slip or fall. Also, wet carpets that are walked on will almost always resoil more quickly. This is because the chemicals and moisture act as a magnet, pulling dirt and debris into the carpet fibers.

Of much greater concern, the long drying time increases the likelihood that mold and mildew will develop, seriously jeopardizing indoor air quality and potentially harming occupant health. With longer drying times, and if traditional carpet cleaning chemicals are used, there is a greater possibility that gases and volatile organic compounds will be released into the air. This can cause allergic reactions and respiratory problems, especially for young children.

Simply put, what falls to the floor like common dust, pollutants and many things that we breathe, tends to stay on the floor until it is cleaned. Properly maintaining the cleanliness of the floors by using the ORBOT low-moisture system will lead to improved air quality and a healthier indoor environment that can be seen, smelt, and felt to believe

Tile & Grout
What cleans the tile and grout so fast, effectively, and without the use of excessive water and harsh chemicals? The engineering behind the Orbot, Brush, and Weight Kit. The Orbot generates thousands of miniature orbits that scrub together with the brush. Imagine a giant orbiting toothbrush that is soft enough that it will not scratch the floors yet is effective enough to scrub away grease and grime from the pores and crevices found in ceramic tile and grout. Together adding the weight kit with the brush and orbital action of the Orbot, the bristles are pushed down into these pores and crevices lifting away immediately the dirt and grime.

Stone
The newly redesigned StoneFlash pads are part of a 6 step system for grinding, honing, and polishing Marble, terrazzo, travertine, limestone, and more! Our low-moisture, orbital cleaning system, Orbot can take on any floor and StoneFlash pads make stone floor restoration even easier.

Epoxy
The engineering and design behind the Orbot, brush, SuperZorb Pads and Weight Kit clean and scrub quickly and effectively without the use of excessive water or harsh chemicals. The Orbot generates thousands of miniature orbits that scrub together with the brush. Imagine a giant orbiting toothbrush that is soft enough that it will not scratch the floors yet is effective enough to scrub away grease and grime from the pores and crevices found in epoxy flooring. Together adding the weight kit to the orbital action of the Orbot, the bristles are pushed down into these pores and crevices lifting away immediately the dirt and grime.

Vinyl
Stripping and maintaining VCT and vinyl floors has never been easier and more environmentally safe until now! The Orbot's unique orbital action makes it possible to strip wax with very little water only! Help conserve water and avoid the use of harsh chemicals that damage the environment and the health of yours and others. Because the Orbot’s driver head is free floating, live stress free without ever worrying about swirl marks and gouges that other traditional machines leave behind. And because the Orbot is unique in design, forever forget about the use of a skirt as the Orbot does will not spit and fling wax and grime onto baseboards, walls, and furniture.

Concrete
When it comes to scrubbing and cleaning concrete surfaces such as school hallways, patios, and other types of high traffic concrete flooring, the Orbot performs miraculously. Eliminate having to use harsh chemicals and an abundance of water to remove the heavy soil that has settled deep down in the concrete pores and crevices. Simply mount the scrub brush with the weight kit, and witness the orbital action pick and lift away the grease and grime in a matter of seconds!

Wood
The Orbot is ideally suited for cleaning, sanding, scrubbing, and waxing wood floors or decking. Because the Orbot’s driver head is free floating, you can live stress free without ever worrying about swirl marks and gouges that other traditional machines leave behind. The Orbot’s orbital actions allows for perfection and ease when it comes to maintaining wood floors fast and effectively.

Other Surfaces
Urethane, rubber matting, and other soft to medium-hard floor surfaces found in outdoor hotel hallways, garages, gymnasiums, and so forth in many cases are interesting enough to clean as most traditional machines dispense too much water and are unfortunately aggressive and destructive. Because the Orbot’s unique engineering generates thousands of miniature orbits, the use of little water is required. The fast orbital action together using the weight kit, scrub brush, SuperZorb Pads and or AgiClean Pads break down dirt and grime instantly allowing little water to be used therefore the floors are left clean and dry within minutes!

EBC Glide Glass & Window Cleaner is a professional, super-concentrated formula that delivers fast, streak-free results while reducing soap usage. Its readily biodegradable surfactants lift soil and rinse clean, enhancing clarity and shine on exterior glass.

Why it works

• Super concentrated: Use less product and clean more efficiently.

• Biodegradable surfactants: Rinse clean and reduce residue for a brilliant finish.

• Versatile application: Ideal as a house-wash additive or for individual squeegee and water-fed pole work.

• Pro performance: Trusted by pressure-washing and window-cleaning professionals.

How to use

• As an additive: Mix 1–2 oz per gallon of your existing house-wash solution. Apply with your standard process, rinse, and allow to air dry.

• For direct window work: Use with squeegee or water-fed pole systems to boost glide, reduce drag, and leave glass sparkling.

Elevate productivity and results with EBC Glide—the streamlined choice for commercial and residential glass cleaning.

SDS Sheet

EBC Glide Glass & Window Cleaner SDS Sheet

F9 BARC Rust and Oxidation Remover – is a powerful, contractor-grade solution formulated to eliminate rust, battery acid stains, and oxidation from concrete, bricks, pavers, tile, stone, stucco, and other surfaces. Trusted by professionals, this concentrated cleaner delivers exceptional performance with just one gallon making up to three gallons of ready-to-use product.

Applications

• Rust stain removal on concrete driveways, sidewalks, and curbs

• Eliminating battery acid staining from warehouse floors and garages

• Oxidation removal on stone, pavers, bricks, and stucco surfaces

• Professional surface restoration and exterior cleaning

Features

• Concentrated Formula: 1 gallon makes 1.5 to 3 gallons of cleaner

• Professional-Only Use: For F9 Authorized Applicators and contractors

• High Coverage: Cleans 400–800 sq. ft. of concrete per gallon

• Surface Safe: Designed for use on concrete, brick, stone, and more

• Quick Mix Instructions: Mix with clean water only prior to use

DO NOT USE ON GLASS

SDS Sheet

BARC SDS Sheet

The Sprayway SW043 Ammoniated Glass Cleaner delivers streak-free clarity with a powerful, high-coverage mist that loosens grease, dirt, grime, and grit on contact. Its ammonia-based formula provides fast-drying performance that leaves no film, haze, or streaks, even on vertical surfaces.

Designed for professional and industrial use, this glass cleaner is ideal for windows, mirrors, showcases, windshields, and other glass surfaces. Packaged in a 20 oz. can (19 oz. net weight), it’s a dependable solution for spotless, polished results in both commercial and residential settings.

Applications

• Cleaning glass windows and doors

• Polishing mirrors and display cases

• Automotive windshields and side windows

• Commercial showcases and fixtures

• Residential glass surfaces requiring streak-free shine

Features

• Ammonia-based formula for tough dirt and grease removal

• Provides uniform coverage with a symmetrical spray pattern

• Fast drying with no film, haze, or streaks

• Cleans and polishes in one step

• Color: clear liquid | Fragrance: ammonia

• Can Size: 20 oz. | Net Weight: 19 oz. | 12 cans per case

• Shelf life: 1+ year | VOC compliant | Recyclable packaging

Specs

Can Size: 20 Oz. 

Net Weight: 19 Oz. 

Shipping Weight: 18 lbs.

Fragrance: Ammonia

Color: Clear

Spray Pattern: Symmetrical cone

Flammability: Not required to be labeled as flammable per 16 CFR 1500

VOC Compliant CARB/OTC: Yes

Recyclable Packaging: Yes

SDS Sheets

Sprayway - Ammoniated Glass Cleaner SDS Sheet

The Sprayway SW575 Clean Breeze Air Freshener is a professional-grade odor counteractant designed to eliminate odors at the source, not mask them. Formulated with Ordenone™, it entraps malodor molecules on contact, leaving behind a pleasant, long-lasting clean breeze fragrance.

This air freshener’s fine mist spray pattern provides even coverage without leaving residue, making it safe for use on draperies, carpeting, upholstery, bedding, fabrics, clothing, automotive interiors, and trash cans. Packaged in a 20 oz. can (14 oz. net weight), it’s VOC compliant, recyclable, and effective for residential, commercial, or industrial odor control.

Applications

• Deodorizing draperies, carpeting, and upholstered furniture

• Freshening bedding, fabrics, and clothing

• Eliminating odors in automobiles and trash cans

• Neutralizing offensive odors such as smoke, urine, and vomit

• Everyday odor control in homes, offices, and commercial spaces

Features

• Formulated with Ordenone™ to neutralize odors at the source

• Counteractant, not a masking spray

• Leaves a pleasant, long-lasting clean fragrance

• Safe for use on fabrics, upholstery, and interiors

• Spray Pattern: Fine mist | Color: White | Fragrance: Fragrant

• Can Size: 20 oz. | Net Weight: 14 oz. 

• VOC compliant (CARB/OTC) | Recyclable packaging

• Flammable per CPSC labeling

Specs

Can Size: 20 Oz. 

Net Weight: 14 Oz. 

Shipping Weight: 16lbs.

Fragrance: Fragrant

Color: White

Spray Pattern: Fine Mist

CPSC Flammability: Required to be labeled as flammable per 16 CFR 1500

VOC Compliant CARB/OTC: Yes

Recyclable Packaging: Yes

Ozone Depleting Compounds: None

SDS Sheet

Sprayway - Clean Breeze Air Freshener SDS Sheet

The Fiberlock IAQ 8000 – HVAC Insulation Sealer (White, 5 Gallon) is a professional-grade, high-performance coating formulated for ductwork applications. Designed as a high-build coating, it bridges and reinforces duct liner or duct board insulation materials, providing superior sealing performance. IAQ 8000 can also be applied to unlined ductwork before component removal, preventing fiberglass and particulate from becoming airborne. Once dry, the coating forms a durable, flexible, and moisture-resistant protective layer with a semi-gloss finish that minimizes dirt buildup. Its high-viscosity formula ensures maximum bridging ability and reduces sagging or dripping on vertical and overhead surfaces.

Applications

• Sealing and reinforcing duct liner or duct board insulation

• Coating unlined ductwork to prevent particulate release

• Use in HVAC maintenance, repair, and restoration projects

• Ideal for commercial, institutional, and industrial duct systems

Features

• 5-gallon size: Perfect for large-scale HVAC projects

• High-build coating: Bridges and reinforces duct insulation materials

• Durable & flexible: Provides long-lasting, moisture-resistant protection

• Semi-gloss finish: Minimizes dirt buildup for cleaner duct surfaces

• High-viscosity formula: Reduces sagging and dripping on vertical/overhead surfaces

• Professional-grade: Trusted for HVAC sealing, maintenance, and restoration

SDS Sheet

Fiberlock IAQ 8000 - HVAC Insulation Sealer SDS Sheet

The Fiberlock AfterShock – White, 1 Gallon is the first EPA-registered fungicidal coating designed to kill and prevent mold and mildew. Applied after surfaces are cleaned and disinfected, this durable antimicrobial coating eliminates residual mold and inhibits future growth. Formulated as a 100% acrylic sealant, AfterShock provides long-lasting protection while maintaining excellent adhesion and easy application. Trusted by remediation professionals, it is recommended for interior use in residential, commercial, and institutional buildings.

Applications

• Interior walls in residential, commercial, and institutional buildings

• Post-remediation coating after cleaning and disinfecting mold-contaminated surfaces

• Long-term protection against mold and mildew growth

• Suitable for drywall, masonry, wood, and other building materials

Features

• EPA-registered fungicidal coating: Kills residual mold and mildew

• Prevents future growth: Long-lasting fungal resistance

• 100% acrylic sealant: Durable and protective finish

• 1-gallon size: Ideal for small- to medium-scale projects

• Easy application: Designed for professional remediation and restoration use

• White finish: Clean, professional look for interior surfaces

SDS Sheet

Fiberlock AfterShock - EPA Registered Fungicidal Coating

Benefect Decon 30 is an innovative, professional-grade disinfectant cleaner formulated for water damage restoration, remediation, and everyday decontamination needs. Unlike conventional disinfectants that require long contact times, Decon 30 eliminates over 99.99% of bacteria in just 30 seconds—making it one of the fastest, most effective solutions available.

Crafted with Thymol from pure Thyme Oil, Benefect Decon 30 uses the same trusted botanical active ingredient that restoration professionals rely on. It contains no synthetic fragrances, dyes, or harsh chemicals, making it safe to use without personal protective equipment (PPE), special precautions, or rinsing—even on food contact surfaces.

With its pleasant light scent and aromatherapeutic vapors, Decon 30 not only disinfects but also deodorizes by eliminating odor-causing bacteria and fungi at the source. Its broad-spectrum efficacy includes gram-positive and gram-negative bacteria, viruses such as Influenza A and Rhinovirus, and odor-causing microbes on both porous and non-porous surfaces.

Key Features

• Kills over 99.99% of bacteria in 30 seconds

• Botanical formula with no synthetic chemicals, dyes, or bleach

• No label warnings, no PPE, no evacuation required

• Food surface contact sanitizer – no rinsing or wiping needed

• Compatible with Spears & FBC system: CPVC

• Safe, economical, and pleasant to use

Applications

• Water damage restoration – effective on vertical surfaces, wood framing, concrete, and carpets

• Remediation sites & equipment – prevents cross-contamination

• Odor elimination – removes odors caused by bacteria, fungi, and organic matter

• Kitchens & food prep areas – safe on sensitive food contact surfaces

• General cleaning & disinfecting – ideal for decontaminating residential, commercial, and industrial environments

Available Sizes

• Pump Spray (4 oz, 12 per case)

• 1 Gallon (3.78 L, 4 per case)

• 5 Gallon Pail (18.9 L)

• 55 Gallon Drum (208 L)

• 275 Gallon Tote

SDS Sheet

Benefect Decon 30 SDS Sheet

GreenOx Renew™ is a powerful, eco-friendly cleaner formulated to restore and brighten weathered wood and other porous surfaces—no scrubbing or pressure washing needed. As a proud participant in the U.S. EPA Safer Choice program, GreenOx Renew is classified as a direct release product, making it a smart, sustainable solution for outdoor and indoor use.

Designed for professionals and homeowners alike, this patented hydrogen peroxide-based formula (7.5%) quickly targets and removes stains caused by mold, mildew, algae, food, smoke, and other organic materials. Once applied, it penetrates deep into the pores of wood and other surfaces to continue cleaning long after rinsing, providing a revitalized, like-new appearance.

The included odorless liquid accelerator enhances cleaning power without the need for hot water, pre-rinsing, or high pressure. Safe for use on wood, concrete, brick, stucco, vinyl siding, stone, fabrics, awnings, and more, GreenOx Renew biodegrades into water and oxygen, offering a safe alternative to harsh bleach-based products.

Key Features:

• 7.5% Hydrogen Peroxide formula

• U.S. EPA Safer Choice Certified (except bulk sizes over 55 gal)

• No pressure washing or hard scrubbing required

• Continues to clean after application

• Low toxicity, low odor, bleach alternative

• Biodegradable and environmentally safe

• Includes 12 oz. activator per 1 gallon of product

• Cleans up to 200 square feet per gallon

Application Notes & Safety:

• Suitable temperature for use: 40°F–100°F

• Storage temperature: 32°F–90°F

• Shelf life: 2 years

• Always wear safety goggles and water-resistant gloves

• Use respiratory protection in enclosed spaces

• May require HEPA vacuum for indoor cleanup

• Avoid contact with skin and eyes

GreenOx Renew™ is the go-to solution for contractors, restoration professionals, and DIYers seeking a safer, more sustainable way to revitalize surfaces.

SDS Sheet

GreenFlow GreenOX Renew SDS Sheet

Front 9 – Groundskeeper is a high-performance, industrial-grade concrete maintenance cleaner formulated for ongoing care of commercial and heavy-use concrete surfaces. Ideal for use after initial degreasing or pressure washing, this low pH, buffered solution penetrates deeply to brighten and clean concrete with every application.

Unlike high pH cleaners, F9 Groundskeeper helps surfaces stay cleaner for longer, reducing buildup and slowing re-soiling over time. This not only cuts down on product usage and labor but also improves efficiency across maintenance schedules. Note: This product is intended for industrial use only and is not suitable for residential concrete. Requires a Hazmat shipping fee and freight delivery—please call for a shipping quote.

Applications

• Industrial and commercial concrete surface maintenance

• Use after degreasing, pre-treatment, or hot water washing

• Long-term upkeep of sidewalks, loading docks, and warehouse floors

• Concrete brightening and post-cleaning enhancement

• Ideal for parking lots, manufacturing plants, and retail exterior zones

Features

• Low pH Buffered Formula: Continues to clean and brighten with repeated use

• Reduces Re-Soiling: Surfaces stay cleaner longer than with high pH alternatives

• Cost-Effective: Uses less product per application while increasing work speed

• Industrial Use Only: Designed specifically for commercial environments

• Freight Shipping Required: Hazmat fee applies; call for a quote

For Industrial Use Only, Not for Residential Use

SDS Sheet

Groundskeeper SDS Sheet

WINSOL Heavy Duty Floor Cleaner - 10150 is a high-performance, low-foaming detergent specifically formulated for use with automatic floor scrubbing machines. Designed to meet the rigorous demands of warehouse and industrial floor maintenance, this powerful cleaner quickly loosens, emulsifies, and lifts tough dirt, grease, oil, food spills, and rubber tire marks. Its advanced blend of cleaners, degreasers, and emulsifiers ensures thorough daily cleaning while promoting a clean and safe work environment. Suitable for both machine and mop-and-bucket applications, WINSOL Heavy Duty Floor Cleaner is USDA approved for use in industrial settings.

Applications

• Daily cleaning of warehouse and industrial floors

• Safe for use in automatic floor scrubbers and manual cleaning methods

• Removal of grease, oil, food spills, rubber tire marks, and stubborn dirt

• Ideal for shipping docks, warehouses, garages, and food processing areas

Key Features

• Low-foaming formula ideal for automatic floor machines

• Powerful degreasing and emulsifying action

• Effectively lifts and removes heavy dirt, oils, and tire residue

• Suitable for daily floor maintenance in industrial environments

• USDA approved for safety and reliability

SDS Sheet

Heavy Duty SDS Sheet

WINSOL Crystal Clear 550 - 6014 is a specialized glass clearing agent formulated to dissolve alkaline residue stains, iridescent surface marks, and Stage I corrosion on uncoated, clear, and float-glass surfaces. Ideal for restoring clarity to building glass, Crystal Clear 550 removes surface-level damage, making windows look sparkling clean and optically clear. While highly effective on Stage I corrosion, it cannot correct Stage II corrosion and may make deeper damage more visible. Always inspect glass surfaces inside and out prior to application to ensure compatibility and best results.

Applications

• Removal of alkaline residue and surface stains on glass

• Clearing iridescence and Stage I corrosion from building windows

• Restoring clarity to uncoated, clear, and float-glass surfaces

• Suitable for commercial, residential, and industrial glass maintenance

Key Features

• Dissolves alkaline stains, iridescence, and Stage I corrosion

• Restores glass to sparkling, optically clear condition

• Safe for most uncoated and float-glass surfaces when used properly

• Cannot remove Stage II corrosion but may reveal existing damage

• Requires thorough glass inspection before use

SDS Sheet

Crystal Clear 550 SDS Sheet

WINSOL Area Rug Cleaner - 3194 is a premium cleaning solution expertly formulated to remove deeply embedded dirt, grease, and grime from specialty, exotic, and delicate area rugs. Designed for safe and effective cleaning, it emulsifies greases while preventing soil redeposition, leaving fibers soft, smooth, and beautifully restored with a lasting luster. This non-toxic, mild pH cleaner is safe for most water-washable materials, including exotic, oriental, and Persian carpets. Free from harsh chemicals, WINSOL Area Rug Cleaner ensures fabric protection, prevents yellowing, and supports environmentally responsible cleaning.

Applications

• Deep cleaning of specialty, exotic, and oriental area rugs

• Safe for Persian, wool, and other delicate carpets

• Compatible with shampooing, bonnet cleaning, and extraction

• Effective for both residential and commercial rug maintenance

Key Features

• Deeply cleans and emulsifies greases without redepositing soils

• Leaves fibers soft, smooth, and with a long-lasting sheen

• Mild, non-toxic formula with a safe pH of 8-9

• Free from harsh chemicals that can damage or yellow fabrics

• Environmentally friendly and safe for water-washable materials

SDS Sheet

Area Rug Cleaner SDS Sheet

WINSOL Aluma Wash - 6329 is a powerful, specially formulated cleaner designed for high-tech aluminum surfaces such as floors, building facades, window frames, platforms, workstations, and walls. It effectively removes airborne pollutants, hydrocarbons, traffic grime, fingerprints, and deeply embedded soils. Aluma Wash also includes corrosion-inhibiting agents that help prevent aluminum blush and protect sensitive surfaces. Suitable for heavy-duty cleaning and rapid degreasing, Aluma Wash is safe, efficient, and will not stain or discolor treated areas.

Applications

• Cleaning high-tech aluminum floors and surfaces

• Building facades and architectural aluminum cleaning

• Window frames, platforms, workstations, and walls

• Heavy-duty degreasing of floors, tables, tools, and equipment

• Safe cleaning around electrical and air conditioning conduits

Key Features

• Rapidly removes heavy soils, hydrocarbons, and traffic grime

• Contains corrosion inhibitors to prevent aluminum blush

• Safe for use on aluminum, will not stain or discolor surfaces

• Suitable for mopping, spraying, or wiping applications

• Fast-acting and easy to rinse for efficient cleaning

SDS Sheet

Aluma Wash SDS Sheet