SkyVac®️ Carbon Fiber Telescopic Vacuum Pole

Introducing the world's first all-in-one telescopic vacuum cleaning pole made in carbon fiber.

Available in approximately 20 ft reach, 25 ft reach and 30 ft reach options. The 25 ft and 30 ft options each use one 5 ft extension pole. This universal telescoping pole is compatible with most major branded vacuums.

Shorter pole has 2 collapsible sections and two clamps.

Longer pole has 4 collapsible sections and 4 clamps.

Key features:

• Shorter pole has a collapsed height of 5.5 ft and longer pole has a collapsed height of 5.75 ft
  
• Reaches heights from 20 ft to 30 ft (select drop down arrow to see sizes)
• Made from featherweight carbon fiber

Video

Included Items

• Telescopic vacuum pole + extension pole - only for 30 ft pole
• 2 Carbon fiber tool holders
• 6 assorted internal brush tools
• Accessory carrying bag
• Pole-to-hose cuff - The cuff comes as with 1.75" diameter on the pole side and is threaded on the hose side to fit a 1.5" threaded hose.  

Click here to see other specialty brushes that can be purchased a la carte. There are some larger sized brushes and specialty types that may increase your productivity.

Specifications

• High modulus carbon fiber construction
• Collapsible down to 5.5 ft
• Weight
• Smaller size: 1 lb 14 oz
• Larger size: 2 lb 13 oz
• Diameter of base pole 1.75 in
• 20 ft pole - 1.75 inch (44 mm)
• 30 ft pole - 1.75 inch (44 mm)
• Sections:
• 20 feet pole - 2 sections 
• 25 feet pole - 4 sections
• 30 feet pole - 4 sections + extension
• Extension pole:
• Carbon fiber / fiber glass hybrid
• Diameter - 1.75 in
• Weight - 11 oz

* There's a tiny discrepancy between lbs & oz vs. mm & grams so these specifications should be considered extremely close but approximate

Introducing SkyVac®️ Trackside Vacuum Poles designed for internal and external cleaning of railway stations, subways and other areas with dangerous electrical lines.

Features:

• Lightweight, weighing only 12 ounces each (335 grams)
• Made of non-conductive materials
• Designed for interchangeable cleaning tools
• Friction fit style, no clips or brackets required to secure the poles

Included Items

Please choose which set style you need at the drop down arrow when ordering.

The internal cleaning set comes with the following:

• 4 or 8 Suction Poles
• Carry Bag
• 135° Blue Flexi Tool Holder
• 90° Blue Flexi Tool Holder
• Small Round Brush
• Small Pipe Brush
• Small Wall Brush
• Finger Style Brush
• Angled Cleaning Brush
• Crevice Tool
• Reducer Tool

The external cleaning set comes with the following:

• 8 Suction Poles
• Carry Bag
• 135° Blue Flexi Tool Holder
• 180° Blue Flexi Tool Holder
• Reducer Tool
• Daily End Tool
• Long End Tool
• Crevice Tool

Specifications

Internal

• 5 ft long
• 1.75" (44mm) diameter
• Weight 12 oz (335 grams) each

External

• 5 ft long
• 2" (50mm) diameter
• Weight 12 oz (335 gram) each

Discontinued: The 44mm sized push-fit poles for internal cleaning are no longer offered. You can upgrade to the SkyVac®️ Elevate Poles and they are retro-compatible with the push-fit style. 

Specifications

SkyVac® Suction Poles:

Height: 5ft (1.5m)
Weight: 10.75 oz (305g) each
Diameter: 1.75" (44mm)
Material: Carbon Fiber

Introducing the SkyVac®️ Elite Carbon Fiber Vacuum Poles designed for gutter cleaning. They can be used with the SkyVac®️ Interceptor, SkyVac®️ 85 Elite and SkyVac®️ Mighty Atom clamped style systems. 

• Elite carbon fiber poles 5 ft long (1.5 metres) -  2" diameter (50mm diameter)
• Safe: Poles are joined together using a parallel joint and quick release clamp
• Efficient: Clamp mechanism is fully adjustable and super quick to release

These new and improved poles can be ordered as a set of 8 or individually.

If you are looking for a more complete set with additional tool holders, half pole &  hose then click here.

Included items

• 1 Elite Carbon Fiber Vac Release Pole
• 7 Elite Carbon Fiber Poles
• Carry Bag
• Carbon Fiber Hairpin Rigid Neck Tool Holder
• Dual Tool (Standard dirt breaker + Scalloped tool) (12")
• Aluminum Long End Tool
• Aluminum Reducer Tool
• Plastic Crevice Tool
• Plastic Daily End Tool

OR One individual elite pole with no other items.

Specifications

• Length: 5ft (1.5m) per pole
• Diameter: 2" (50mm) per pole
• Weight: 10oz (280g) per pole
• Material: Carbon Fiber

Day or Night, no ladders, scaffolding, scissor lifts or cherry pickers required...

Our lightweight telescopic SkyPole elevates our wireless SkyCam up to 44ft (14 meters) to provide photo and video capture capability.  It can also be used as a water fed pole to dispense gutter brightening solution. 

The commercial-grade carbon fiber SkyPole is one of the lightest poles on the market but is engineered to be tough and rigid. 

Note: The camera is purchased separately: SkyVac SurveyCam High Reach Inspection System.

Also works with the Skyscraper HeadSkyVac®️ SkyScraper Head, SkyScraper Head and Brushes, Skyscraper Wire Brush, SkyScraper Speedi Brushes, and SkySweeper Brush.

Typical Usage

• Building inspection, indoors & outdoors
• Gutter & roof inspection
• Security & surveillance
• Plus many more applications...

Specifications

24 foot - 3.6 pounds, collapsed length 5.3 feet, 50% carbon fiber

34 foot - 5.5 pounds, collapsed length 6.4 feet, 100% carbon fiber

44 foot - 6.9 pounds, collapsed length 7.1 feet, 100% carbon fiber 

Compatible with the SkyVac® Atom Push Fit Poles.

For greater results when removing heavy soiling in gutters.

• Super lightweight strong carbon fiber construction - no heavy metal parts
• Interchangeable tool holder
• Extra wide entry point
• Is compatible to existing 1.75" (44mm) SkyVac Push Fit suction poles
• Comes complete with 5 ft suction pole, rigid neck and metal dirt breaker tool

Video

Included Items

• 1 x SkyVac® Tapered End Suction Pole 2in (50mm) top end / 1.75in (44mm) base end Diameter
• 1 x SkyVac® Elite Hairpin 135° Rigid Neck Tool Holder*
• 1 x SkyVac® Dual Tool (Elite Dirt Breaker End Tool & Scalloped Aluminum End Tool combination)

*European Community Design Registration Number 008458913

Another World First for skyVac®! Control suction with a simple twist of the cuff on the Vac Release Pole. Compatible with the SkyVac® Industrial and Interceptor Gutter Vacuums, this innovative and ultra-lightweight carbon fiber pole enables the operator to safely and efficiently release gutter debris without having to lower poles or cut vacuum power.

SkyVac® Elite Vac Release Pole. Patent PENDING: Application No: GB1713830.6

The SkyVac® Elite Poles alone have the lightest weight to size ratio on the gutter cleaning market. With the added feature of the Vac Release, your poles will be performing at their best.

The Vac Release function saves you time and results in massive productivity gains. Traditionally, to remove larger debris and tufts, the operator would deactivate the machine while balancing or lowering their poles to manually pull the tuft out. The Vac Release Pole eliminates the time wasted doing it manually.

It features a simply twist door function, positive stop, and adjustable clamp mechanism.

Key Features:

• Extremely strong but lightweight carbon fiber construction
• Twist door function
• Positive stop and adjustable clamp mechanism
• Compatible with the Elite Pole System only

Video

Included Items

One SkyVac®️ Release Elite Pole

Specifications

• Length: 5 ft long (1.5m)
• Diameter: 2in Diameter (50mm)
• Material: Carbon Fiber

Please Note: This product listing is for the Grafter™️ style configuration for the new Hydra Waterfed poles.

*Each pole requires one fly lead, purchased separately. 

You'll need to choose pole length and pole construction (material). All Grafter poles come with a 12 inch non-curling monofilament nylon bristle brush and adjustable angle crank.

Below is a video and description of all the types of Hydra poles available. If you are interested in one of the other styles of poles then click the link below:

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release

Ionic Hydra™️ Waterfed Pole

Hydra is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s Hydra™️ pole is available with a number of head options.

Weight Savings

The first thing you notice about the Hydra™️ pole is just how light it is. Ionic has really focused on weight reduction and have reduced the wall thickness of every pole section, resulting in significant weight savings and maintained rigidity. Narrow handles provide a more comfortable grip. In order to achieve Ionic's lightest ever pole, every component came under scrutiny, with weight savings being made on nearly every part, from clamps to levers.

One Finger Operation Clamps

The second thing you notice are the next generation clamps on the Hydra™️ pole, with slick one finger operation and adjustment these clamps feature patent pending spring assisted release to reduce tube section wear. In addition, the clamps are carefully crafted to ensure tight closure time after time,  year after year.

Protector™️ Handle as Standard

The final thing you notice is that every Hydra™️ pole comes standard with Ionic’s unique Protector handle. The only waterfed pole to meet the British Standard for electrical safety is available to you at no extra cost. It seems that there is barely a month that goes by without news of a window cleaner electrocuted at work. Whilst safer than ladders Ionic believes that waterfed poles should be a no-risk alternative. 

Important: A Special Note About the Protector Handle

The bottom section of the pole is the only section that is double insulated, giving protection up to 1000 volts. If the operator uses it in proximity of a higher voltage, there is a risk of it jumping from the carbon sections and electrocuting the operator. It is absolutely essential that the operator or supervisor does a risk assessment prior to undertaking work using this pole. In areas of greater electrocution risk we recommend using a fully fiber glass pole up to 30ft.

Configurable Brush Heads

Hydra™️ is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s HydraTM pole is available with a number of head options.

Head Options

The Hydra™️ range adopted the tried and tested heads of Ionic's previous Grafter™️, Glyder™️, Swift ™️ and Vertigo™️ waterfed poles. This means you can select your preferred head and brush assembly, and benefit from the numerous features that are standard on the Hydra™️ pole range, including; light weights, compact sizes, next generation clamps, tubeless storage, protective handle and water-flow shut off.

*Hydra Grafter Pole only fits with the 12 inch grafter brush. If you want a larger sized brush, you will need a different pole. 

Neck Options

The Grafter™️ Head comes with the Residential Brush/Angle-Crank for Grafter™️ 

Features

Hydra™️ Features

TUBELESS QUICK CONNECTION

Push fit style connection allows for quick connection to and from the pole, saving you time and money. The twist and lock feature within the protective housing prevents accidental separation during use.

WATER FLOW SHUT OFF Allows the user the shut the water flow off by crimping the tube, meaning the pole can be left unsupervised with no water flowing, reducing unnecessary water usage and saving money.

SPRING LOADED CLAMPS

Combined with wear resistant telescopic tubes, Ionic’s patent pending spring assisted pole clamps ensures smooth action, whilst minimizing wear in the pole sections. While other designs insure that poles remain clamped as the section wears, our focus was to engineer out factors that contribute to pole tube wear in the first place. In doing so Ionic’s poles last considerably longer, retain their performance and save you money over time.

FlyLeads

Hydra FlyLeads

Hydra™️ is a tubeless pole, making it neat and tidy when storing in your van. The pole hose, known as a fly lead, is stored on your hose reel when not in use. Choosing the correct fly lead for your Hydra™️ is dependent on how it is going to be used. For example, if you have one 32ft Hydra™️ then you will require a 16 meter fly lead. But if you have multiple size poles then you only need to have a fly lead to fit your longest pole, so if you had a 32ft and a 55ft Hydra, a 22 meter fly lead would cover both poles.

*If you have more than one operator then a fly lead per hose reel will be required.

Size Chart

Please Note: This product listing is for the Swift™️ style configuration for the new Hydra Waterfed poles.

*Each pole requires one fly lead, purchased separately. 

You'll need to choose pole length, pole construction (material) and size brush. All Swift poles come standard with a 9" Gooseneck however 24" and 36" sizes are available by request (for an additional fee). Please contact us directly for pricing on larger sized Goosenecks. Brushes are commercial grade, ready to fit to an Ionic ferrule.

Below is a video and description of all the types of Hydra poles available. If you are interested in one of the other styles of poles then click the link below:

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release

Ionic Hydra™️ Waterfed Pole

Hydra is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s Hydra™️ pole is available with a number of head options.

Weight Savings

The first thing you notice about the Hydra™️ pole is just how light it is. Ionic has really focused on weight reduction and have reduced the wall thickness of every pole section, resulting in significant weight savings and maintained rigidity. Narrow handles provide a more comfortable grip. In order to achieve Ionic's lightest ever pole, every component came under scrutiny, with weight savings being made on nearly every part, from clamps to levers.

One Finger Operation Clamps

The second thing you notice are the next generation clamps on the Hydra™️ pole, with slick one finger operation and adjustment these clamps feature patent pending spring assisted release to reduce tube section wear. In addition, the clamps are carefully crafted to ensure tight closure time after time,  year after year.

Protector™️ Handle as Standard

The final thing you notice is that every Hydra™️ pole comes standard with Ionic’s unique Protector handle. The only waterfed pole to meet the British Standard for electrical safety is available to you at no extra cost. It seems that there is barely a month that goes by without news of a window cleaner electrocuted at work. Whilst safer than ladders Ionic believes that waterfed poles should be a no-risk alternative. 

Important: A Special Note About the Protector Handle

The bottom section of the pole is the only section that is double insulated, giving protection up to 1000 volts. If the operator uses it in proximity of a higher voltage, there is a risk of it jumping from the carbon sections and electrocuting the operator. It is absolutely essential that the operator or supervisor does a risk assessment prior to undertaking work using this pole. In areas of greater electrocution risk we recommend using a fully fiber glass pole up to 30ft.

Configurable Brush Heads

Hydra™️ is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s HydraTM pole is available with a number of head options.

Head Options

The Hydra™️ range adopted the tried and tested heads of Ionic's previous Grafter™️, Glyder™️, Swift ™️ and Vertigo™️ waterfed poles. This means you can select your preferred head and brush assembly, and benefit from the numerous features that are standard on the Hydra™️ pole range, including; light weights, compact sizes, next generation clamps, tubeless storage, protective handle and water-flow shut off.

The Swift™️ Head comes with your choice ofSwift Brush Complete Commercial Brush/Gooseneck For Swift™️ head, choose from 14 inch or 18 inch brush, with gooseneck in 9 inch, 18 inch and 24 inch sizes.

Features

Hydra™️ Features

TUBELESS QUICK CONNECTION

Push fit style connection allows for quick connection to and from the pole, saving you time and money. The twist and lock feature within the protective housing prevents accidental separation during use.

WATER FLOW SHUT OFF Allows the user the shut the water flow off by crimping the tube, meaning the pole can be left unsupervised with no water flowing, reducing unnecessary water usage and saving money.

SPRING LOADED CLAMPS

Combined with wear resistant telescopic tubes, Ionic’s patent pending spring assisted pole clamps ensures smooth action, whilst minimizing wear in the pole sections. While other designs insure that poles remain clamped as the section wears, our focus was to engineer out factors that contribute to pole tube wear in the first place. In doing so Ionic’s poles last considerably longer, retain their performance and save you money over time.

FlyLeads

Hydra FlyLeads

Hydra™️ is a tubeless pole, making it neat and tidy when storing in your van. The pole hose, known as a fly lead, is stored on your hose reel when not in use. Choosing the correct fly lead for your Hydra™️ is dependent on how it is going to be used. For example, if you have one 32ft Hydra™️ then you will require a 16 meter fly lead. But if you have multiple size poles then you only need to have a fly lead to fit your longest pole, so if you had a 32ft and a 55ft Hydra, a 22 meter fly lead would cover both poles. *If you have more than one operator then a fly lead per hose reel will be required.

Size Chart

Please Note: This product listing is for the Vertigo™️ Quick Release style configuration for the new Hydra Waterfed poles.

*Each pole requires one fly lead, purchased separately. 

Vertigo Quick Release allows the operator to easily remove the Brush Head and replace it with the Vertigo Moerman Tool Adapter; therefore, enabling a range of Moerman hand tools to be used. Examples are a window mop, a squeegee, or a scraper, among others.

You'll need to choose pole length, pole construction (material) and size brush. All Vertigo™️ Quick Release poles come standard with a Vertigo Neck in one of three sizes (6 inch, 9 inch or 15 inch). Don't worry, we've pre-matched these necks to the length of the pole you choose.  The water flows through the angle crank, preventing any exposed tubing outside the pole.

Brushes are commercial grade and available in 14 in. and 18 in. sizes with Rinse Bar with Pencil Jets as standard.

There are three small options available not listed in the drop-down menu. You can optionally substitute Fan Jets (instead of Pencil Jets). Also you can choose a Flocked Brush if you intend on cleaning cladding or delicate surface cleaning. Lastly you can choose a Lightweight Brush (less bristles to lighten overall head weight).

Please contact us for a custom quote if you intend on substituting for a Fan Jet, Flocked Brush or Lightweight Brush.  If you want to own the standard style AND add other brush versions they are listed on our website separately and can be easily added to your cart before checkout.

Below is a video and description of all the types of Hydra poles available. If you are interested in one of the other styles of poles then click the link below:

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release

Ionic Hydra™️ Waterfed Pole

Hydra is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s Hydra™️ pole is available with a number of head options.

Weight Savings

The first thing you notice about the Hydra™️ pole is just how light it is. Ionic has really focused on weight reduction and have reduced the wall thickness of every pole section, resulting in significant weight savings and maintained rigidity. Narrow handles provide a more comfortable grip. In order to achieve Ionic's lightest ever pole, every component came under scrutiny, with weight savings being made on nearly every part, from clamps to levers.

One Finger Operation Clamps

The second thing you notice are the next generation clamps on the Hydra™️ pole, with slick one finger operation and adjustment these clamps feature patent pending spring assisted release to reduce tube section wear. In addition, the clamps are carefully crafted to ensure tight closure time after time,  year after year.

Protector™️ Handle as Standard

The final thing you notice is that every Hydra™️ pole comes standard with Ionic’s unique Protector handle. The only waterfed pole to meet the British Standard for electrical safety is available to you at no extra cost. It seems that there is barely a month that goes by without news of a window cleaner electrocuted at work. Whilst safer than ladders Ionic believes that waterfed poles should be a no-risk alternative. 

Important: A Special Note About the Protector Handle

The bottom section of the pole is the only section that is double insulated, giving protection up to 1000 volts. If the operator uses it in proximity of a higher voltage, there is a risk of it jumping from the carbon sections and electrocuting the operator. It is absolutely essential that the operator or supervisor does a risk assessment prior to undertaking work using this pole. In areas of greater electrocution risk we recommend using a fully fiber glass pole up to 30ft.

Configurable Brush Heads

Hydra™️ is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s HydraTM pole is available with a number of head options.

Head Options

The Hydra™️ range adopted the tried and tested heads of Ionic's previous Grafter™️, Glyder™️, Swift ™️ and Vertigo™️ waterfed poles. This means you can select your preferred head and brush assembly, and benefit from the numerous features that are standard on the Hydra™️ pole range, including; light weights, compact sizes, next generation clamps, tubeless storage, protective handle and water-flow shut off.

The Vertigo™️ Quick Release system includes a quick release brush variationsIonic Systems Vertigo Quick Release Brush Head Assembly of double trim, light weight, or flocked, sizes 14"or 18", with necks of of 6", 9", or 15".

Features 

Hydra™️ Features

TUBELESS QUICK CONNECTION

Push fit style connection allows for quick connection to and from the pole, saving you time and money. The twist and lock feature within the protective housing prevents accidental separation during use.

WATER FLOW SHUT OFF Allows the user the shut the water flow off by crimping the tube, meaning the pole can be left unsupervised with no water flowing, reducing unnecessary water usage and saving money.

SPRING LOADED CLAMPS

Combined with wear resistant telescopic tubes, Ionic’s patent pending spring assisted pole clamps ensures smooth action, whilst minimizing wear in the pole sections. While other designs insure that poles remain clamped as the section wears, our focus was to engineer out factors that contribute to pole tube wear in the first place. In doing so Ionic’s poles last considerably longer, retain their performance and save you money over time.

MULTIPURPOSE TOOL

When you opt for the Vertigo™️ quick release head, you have the ability to transform your Hydra™️ into a multi purpose tool. With the Moerman adapter you can fit a range of Moerman hand tools to the Vertigo™️ Q/R head, including squeegees, t-bars, scrapers etc. The Vertigo™️ quick release spray nozzle is perfect for rinsing, and allows the application of a foam cleaner when combined with Ionic’s Constant Flow™️ automatic pump system.

FlyLeads

Hydra FlyLeads

Hydra™️ is a tubeless pole, making it neat and tidy when storing in your van. The pole hose, known as a fly lead, is stored on your hose reel when not in use. Choosing the correct fly lead for your Hydra™️ is dependent on how it is going to be used. For example, if you have one 32ft Hydra™️ then you will require a 16 meter fly lead. But if you have multiple size poles then you only need to have a fly lead to fit your longest pole, so if you had a 32ft and a 55ft Hydra, a 22 meter fly lead would cover both poles. *If you have more than one operator then a fly lead per hose reel will be required.

Size Chart

Please Note: This product listing is for the Vertigo™️ standard style configuration for the new Hydra Waterfed poles.

*Each pole requires one fly lead, purchased separately. 

You'll need to choose pole length, pole construction (material) and size brush. All Vertigo™️ poles come standard with a water fed angle crank which is adjustable. The water flows through the angle crank, preventing any exposed tubing outside the pole.

Brushes are commercial grade and available in 14 in. and 18 in. sizes with Rinse Bar and Pencil Jets as standard.

There are three small options available not listed in the drop-down menu. You can optionally substitute Fan Jets (instead of Pencil Jets). Also you can choose a Flocked Brush if you intend on cleaning cladding or delicate surface cleaning. Lastly you can choose a Lightweight Brush (less bristles to lighten overall head weight).

Please contact us for a custom quote if you intend on substituting for a Fan Jet, Flocked Brush or Lightweight Brush.  If you want to own the standard style AND add other brush versions they are listed on our website separately and can be easily added to your cart before checkout.

Below is a video and description of all the types of Hydra poles available. If you are interested in one of the other styles of poles then click the link below:

• Grafter
• Swift
• Vertigo Standard
• Vertigo Quick Release

Ionic Hydra™️ Waterfed Pole

Hydra is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s Hydra™️ pole is available with a number of head options.

Weight Savings

The first thing you notice about the Hydra™️ pole is just how light it is. Ionic has really focused on weight reduction and have reduced the wall thickness of every pole section, resulting in significant weight savings and maintained rigidity. Narrow handles provide a more comfortable grip. In order to achieve Ionic's lightest ever pole, every component came under scrutiny, with weight savings being made on nearly every part, from clamps to levers.

One Finger Operation Clamps

The second thing you notice are the next generation clamps on the Hydra™️ pole, with slick one finger operation and adjustment these clamps feature patent pending spring assisted release to reduce tube section wear. In addition, the clamps are carefully crafted to ensure tight closure time after time,  year after year.

Protector™️ Handle as Standard

The final thing you notice is that every Hydra™️ pole comes standard with Ionic’s unique Protector handle. The only waterfed pole to meet the British Standard for electrical safety is available to you at no extra cost. It seems that there is barely a month that goes by without news of a window cleaner electrocuted at work. Whilst safer than ladders Ionic believes that waterfed poles should be a no-risk alternative. 

Important: A Special Note About the Protector Handle

The bottom section of the pole is the only section that is double insulated, giving protection up to 1000 volts. If the operator uses it in proximity of a higher voltage, there is a risk of it jumping from the carbon sections and electrocuting the operator. It is absolutely essential that the operator or supervisor does a risk assessment prior to undertaking work using this pole. In areas of greater electrocution risk we recommend using a fully fiber glass pole up to 30ft.

Configurable Brush Heads

Hydra™️ is a lightweight but strong pole platform that window cleaners can configure based upon their specific needs. Therefore just like the mythical Greek serpent Ionic’s HydraTM pole is available with a number of head options.

Head Options

The Hydra™️ range adopted the tried and tested heads of Ionic's previous Grafter™️, Glyder™️, Swift ™️ and Vertigo™️ waterfed poles. This means you can select your preferred head and brush assembly, and benefit from the numerous features that are standard on the Hydra™️ pole range, including; light weights, compact sizes, next generation clamps, tubeless storage, protective handle and water-flow shut off.

Features

Hydra™️ Features

TUBELESS QUICK CONNECTION

Push fit style connection allows for quick connection to and from the pole, saving you time and money. The twist and lock feature within the protective housing prevents accidental separation during use.

WATER FLOW SHUT OFF Allows the user the shut the water flow off by crimping the tube, meaning the pole can be left unsupervised with no water flowing, reducing unnecessary water usage and saving money.

SPRING LOADED CLAMPS

Combined with wear resistant telescopic tubes, Ionic’s patent pending spring assisted pole clamps ensures smooth action, whilst minimizing wear in the pole sections. While other designs insure that poles remain clamped as the section wears, our focus was to engineer out factors that contribute to pole tube wear in the first place. In doing so Ionic’s poles last considerably longer, retain their performance and save you money over time.

FlyLeads

Hydra FlyLeads

Hydra™️ is a tubeless pole, making it neat and tidy when storing in your van. The pole hose, known as a fly lead, is stored on your hose reel when not in use. Choosing the correct fly lead for your Hydra™️ is dependent on how it is going to be used. For example, if you have one 32ft Hydra™️ then you will require a 16 meter fly lead. But if you have multiple size poles then you only need to have a fly lead to fit your longest pole, so if you had a 32ft and a 55ft Hydra, a 22 meter fly lead would cover both poles. *If you have more than one operator then a fly lead per hose reel will be required.

Size Chart

The Freepole is a telescopic window cleaning pole capable of reaching up to 120 cm, ideal for working on medium height buildings.

 In order to facilitate the task of the operator in cleaning both internal and external windows, the pole is lightweight and durable because made of aluminium. It is a very practical tool, foldable in 3 sections.

 IPC recommends this product for cleaning facades and windows, in both indoors and outdoors.

KEY FEATURES

• Foldable in 3 sections
• Pole extendable up to 120 cm to work at heght up to 3 m
• With quick connect end cone
• Light structure in aluminum

The SkyVac®️ Carry Bag is a long blue logo bag for carrying SkyVac®️ vacuum poles. Side pockets with zippers hold cleaning attachments.

Included Items

1 x SkyVac®️ Carry Bag for Accessories and Poles

SkyVac Elite Half Pole

Achieve the perfect working height with the SkyVac® Elite Half Pole. At 29.5in (750mm) in length, the ultra-lightweight carbon fiber pole is a perfect solution. For efficient and effective high-level cleaning, simply and securely clamp the half pole within the SkyVac® Elite system.

The SkyVac® Elite Half Pole is a useful tool for when a full-length pole is too much for your needs. The half pole gives you that extra bit of length which may be required with certain buildings or properties.

It is made out of the same carbon fiber material as the full-length poles, meaning that it is incredibly lightweight at just 5.9oz (167g), yet can still hold a significant amount of weight. It is ideal for customizing your cleaning height.

Key Features:

• Compatible with the Elite Poles
• Positive stopper and clamping mechanism
• Carbon fiber construction

Video

 Included Items

1x Elite Carbon Fiber Half Pole

Specifications

• Length: 29.5in (750mm)
• Diameter: 2" (50mm)
• Weight: 5.9oz
• Material: Carbon Fiber