External Products

The Quest 2280 FREZE-IT Chewing Gum Remover is an environmentally friendly, solvent-free solution for the quick and easy removal of chewing gum, wax, and adhesives. By delivering a frosty blast of air, FREZE-IT instantly freezes gum and wax, breaking the adhesion bond so they can be removed cleanly from most surfaces.

Non-corrosive and safe to use, FREZE-IT is also highly versatile—ideal for not only gum and wax removal but also for cooling circuit board components, assisting in soldering applications, and shrink-fitting small parts. Packaged in 12 oz. cans (7 oz. net weight), this product is trusted by schools, commercial cleaning crews, and maintenance professionals for fast-acting results without harsh chemicals.

Applications

• Removing chewing gum and wax from carpets, furniture, and sidewalks

• Safe for use in schools, offices, homes, and commercial spaces

• Cooling circuit boards, solder joints, and electronic components

• Shrink-fitting pins, bushings, and bearings

• Maintenance in welding shops and repair facilities

Features

• Provides a frosty blast of air to freeze gum and wax instantly

• Breaks adhesion without solvents or harsh chemicals

• Non-corrosive and environmentally friendly formula

• Fast-acting and safe for multiple surfaces

• Can Size: 12 oz. | Net Weight: 7 oz. 

• Clear, colorless, non-flammable formula

• VOC compliant | Recyclable packaging

Specs

FORM: Solvent-Based Aerosol

FLASH POINT: -155°F

ODOR: None

FLAME EXTENSION: >18”

COLOR: Clear

SOLUBILITY IN WATER: .008%

DETERGENCY: None

SPECIFIC GRAVITY: 0.56

TOXICITY: 1000 ppm OSHA TLV %

VOLATILE BY VOLUME: 100%

WETTING ABILITY: None

pH: N/A

PROPELLANT: Hydrocarbon

COLD STABILITY: 0°F

EVAPORATION RATE: Fast

PHOSPHATES: None 

BIODEGRADABILITY: No

SDS Sheet

QuestSpecialty - Freze-IT Chewing Gum Remover

Hazard Classification:
- Flammable Aerosol Category 1
- Liquefied Gas
- Signal Word: Danger

Hazard Statements:
- Extremely flammable aerosol
- Contains gas under pressure; may explode if heated
- May cause frostbite on contact with skin

Recommended PPE:
- Safety glasses
- Chemical-resistant gloves (to prevent frostbite from contact)
- Protective clothing as needed to prevent skin exposure
- Respiratory protection required in confined or poorly ventilated areas
- Use in well-ventilated area and keep away from heat, sparks, and open flames

The Benefect Biodegradable Disinfectant Wipes  provide fast, effective germ control in a convenient wipe. Killing over 99.99% of bacteria in just 30 seconds, these wipes leave surfaces clean, decontaminated, and lightly scented with lemon and thyme—without sticky residue. Made from dense, durable wood pulp, they resist shredding and linting, even on rough surfaces like wood and concrete. Formulated with authentic botanical ingredients, these wipes are free from harsh chemicals and certified 100% biobased by the USDA BioPreferred Program. Safe, effective, and eco-friendly, they’re trusted by restoration and remediation professionals worldwide.

Applications

• Disinfecting high-touch surfaces in gyms, schools, and offices

• Ideal for healthcare, hospitality, and residential cleaning

• Preventing cross-contamination in public and commercial environments

• Effective for restoration and remediation projects

Features

• Kills 99.99% of bacteria in 30 seconds

• Biodegradable wood pulp wipes: Strong, durable, and eco-friendly

• 6" x 7" size: Convenient for small or large surfaces

• Botanical formula: Plant-based, no harsh or synthetic chemicals

• Fresh lemon & thyme scent: Leaves no sticky residue

• USDA BioPreferred certified: Verified 100% biobased content

Available Sizes

• Small Canister (90 ct)
• Canister (170 ct)
• Pail (250 ct)

Safety

Benefect Biodegradable Wipes SDS Sheet

Hazard Classification:
- Not classified as hazardous under GHS
- No hazard pictograms
- No signal word

Recommended PPE:
- No PPE required under normal conditions of use
- Follow standard hygiene practices
- Avoid unnecessary exposure and eye contact

The Benefect Evergreen™ A44 is an environmentally preferred, all-natural cleaner degreaser formulated for ultrasonic cleaning systems. Designed for delicate items and heavy grease or sticky soils, it’s an ideal solution for contents damaged by smoke, water, or mold. Using Benefect’s optimized dynamic chemistry and counter-ionization, Evergreen A44 penetrates soils rapidly and disperses them ultra-finely, making ultrasonic cleaning faster and more efficient while reducing labor. With biodegradable, sustainable ingredients, it provides a safe and eco-friendly alternative to synthetic cleaners.

Applications

• Ultrasonic cleaning of delicate or fragile items

• Removing grease, soot, or sticky soils from delicate items

• Contents restoration after smoke, water, or mold damage

• Suitable for residential, commercial, and restoration cleaning projects

Features

• All-natural formulation: Biodegradable, sustainable, and eco-friendly

• 2-in-1 cleaning power: Works on delicate items and heavy grease

• Optimized dynamic chemistry: Rapid soil penetration and dispersion

• Safe for operators: Low pH, non-corrosive, solvent-free, and VOC-free

• Efficient cleaning: Synergizes with ultrasonic technology to save time and labor

Safety

Benefect Evergreen A44 SDS Sheet

Hazard Classification:
- Not classified as hazardous under GHS
- Contains components classified as Eye Irritation Category 2B
- No hazard pictograms
- No signal word

Recommended PPE:
- Safety glasses or chemical goggles
- Protective gloves (recommended due to surfactants)
- Protective clothing as required
- Respiratory protection not required under normal use

GlassRenu Grey RenuDisks are the least abrasive disks in the GlassRenu Scratch Removal System, engineered for precision in the final stages of glass restoration. Often referred to as the “Pre-Polish Disk,” the Grey RenuDisk is designed to remove light surface damage, etched-in water stains, and prepare the surface for polishing.

When fully impregnated and used at three different speeds, the Grey RenuDisk refines the repair area to a fine haze, making it easy to quickly polish the glass back to a crystal-clear finish. With their cushioned design and proprietary abrasive technology, these disks ensure consistent results without leaving distortion, even on challenging repairs.

Applications

• Pre-polish step in glass restoration

• Light scratch and surface blemish removal

• Eliminating etched-in hard water damage

• Preparing glass for final polishing and luster restoration

• Automotive, residential, and commercial glass services

Key Features

• Least abrasive disks in the GlassRenu system

• Known as the “Pre-Polish Disk” for final restoration prep

• Removes light damage and water etching effectively

• Refines repair areas to a fine haze for easy polishing

• Proprietary cushioned abrasive design prevents distortion

• Sold in sleeves of 10 disks for professional use

• Part of the patented GlassRenu Scratch Removal Process

GlassRenu Black RenuDisks are the industry standard for surface damage removal and form the first step in the GlassRenu Scratch Removal System. Designed to address CAT-2 and CAT-3 damage, these disks provide a robust abrasive solution for quickly eliminating light to medium surface damage.

As the first abrasive disk used in the restoration process, the Black RenuDisk efficiently grinds below the damaged glass surface, preparing it for further refinements. With their proprietary abrasive technology and cushioned design, these disks remove scratches and blemishes evenly while preventing distortion or visible trace marks, even on deeper repairs.

Applications

• Step one of the GlassRenu restoration process

• Removing light to medium glass damage

• CAT-2 and CAT-3 glass scratch repair

• Automotive, residential, and commercial glass restoration

• Preparing glass for further refinement and polishing

Key Features

• First abrasive disk used in the GlassRenu Scratch Removal System

• Designed for CAT-2 and CAT-3 damage repair

• Removes most common types of surface damage

• Robust abrasive for quick and efficient scratch removal

• Proprietary cushioned design prevents distortion or haze

• Sold in sleeves of 10 disks for professional use

• Backed by decades of research and development

The Original GlassRenu Grey RenuDisks are the gentlest in the GlassRenu Scratch Removal System, crafted for precision during the final phase of glass restoration. Commonly known as the Pre-Polish Disk, the Grey RenuDisk effectively clears light surface marks, etched water spots, and preps the glass for a flawless polish.

When properly conditioned and operated at three distinct speeds, the Grey RenuDisk smooths the repaired area to a subtle haze—allowing for a fast, effortless polish to a crystal-clear finish. Thanks to its cushioned construction and advanced abrasive formulation, this disk delivers uniform, distortion-free results, even on the most demanding restoration jobs.

Applications

• Pre-polish step in glass restoration

• Light scratch and surface blemish removal

• Eliminating etched-in hard water damage

• Preparing glass for final polishing and luster restoration

• Automotive, residential, and commercial glass services

Key Features

• Least abrasive disks in the GlassRenu system

• Known as the “Pre-Polish Disk” for final restoration prep

• Removes light damage and water etching effectively

• Refines repair areas to a fine haze for easy polishing

• Proprietary cushioned abrasive design prevents distortion

• Sold in sleeves of 10 disks for professional use

• Part of the patented GlassRenu Scratch Removal Process

The Storm Water Draw Tube Assembly is a direct replacement part for The Softwash Storm™ system. Built for professional contractors, this modular assembly is engineered for reliability, durability, and long-lasting performance. Designed to keep your system running at peak efficiency, it provides a cost-effective solution when replacement is needed. As part of The Softwash Storm’s professional-grade design, this draw tube assembly ensures consistent results and dependable operation for your soft washing business.

The Storm Cam Lock Fill Valve Assembly is a professional-grade replacement part for the Softwash Storm™ system. Designed for contractors, this durable valve assembly restores reliable performance while maintaining the system’s modular flexibility. Built for long-term use, it ensures your rig continues to run efficiently without the need for costly, oversized solutions.

The Storm Bleach Draw Tube Assembly is designed exclusively for the Softwash Storm™ system, delivering reliable performance and easy integration. Built for professional contractors, this assembly ensures consistent chemical draw and seamless operation. With the Storm’s modular design, you can start small and expand as your business grows—making this draw tube assembly a vital component for long-term efficiency and scalability.

The Storm Softwash 2 Shooter Spray Tip Assembly is a high-quality replacement part designed for the Storm Softwash™ system. Built to fit seamlessly with the ball valve wand spray assembly, this spray tip ensures reliable chemical delivery for precise and efficient softwashing. Featuring two durable nozzles, it provides consistent distribution of cleaning solutions to achieve professional results.

Crafted for contractors who value performance and flexibility, the Storm Softwash™ system is modular and expandable—making it one of the most cost-effective upgrade paths in the industry. Whether you’re starting small or scaling your business, this spray tip assembly keeps your system running at peak efficiency.

The Storm™ 3/4" Tank Flange Banjo is a high-quality replacement part designed for the Softwash Storm™ system. Built for durability and precision, this flange ensures a secure fit and reliable performance for your softwash setup. Ideal for contractors using the modular Storm™ platform, it helps maintain system efficiency and supports long-term growth as your business expands.

The Storm 1/2 NPTF Black Check Valve is designed for seamless compatibility with the Softwash Storm™ system, a modular, professional-grade solution trusted by contractors. Engineered for durability and reliable performance, this check valve ensures smooth system operation while supporting the Storm’s flexible, expandable design. Whether you’re starting small or scaling up, this component helps deliver consistent results and long-term value for your softwashing business.

The SM Arnold 6" Velocity iDX Coned Pads are engineered for superior performance with dual action polishers. Featuring an EVA-rubber interface, these pads absorb pressure and resist heat buildup, delivering consistent surface contact for professional results. Designed to remove heavy scratches, holograms, water spots, and other imperfections with ease, they ensure a flawless, swirl-free finish.

Each pad includes a convenient loop backing for quick attachment to a 5" hook backing plate. With a 6” diameter and 1” depth, they provide the perfect balance of control and coverage for detailing professionals and enthusiasts alike.

Available Variants:

• Orange (Euro Foam): Compounding

• Blue (40 PPI): Cutting

• Green (60 PPI): Buffing

• Yellow (70 PPI): Polishing

• White (75 PPI): Finishing

• Gray (70 PPI): Buffing/Polishing

• Maroon (70 PPI): Medium Cutting

Upgrade your detailing process with Velocity iDX pads—durable, versatile, and precision-engineered for every stage of paint correction.

Specs

Diameter: 6”

Pad Depth: 1”

The SM Arnold Velocity Wool Buffing Pads – Flat (43-366) are crafted from plush, 100% U.S.A.-made wool for superior polishing results. Designed for use with Long Throw Gear Drive, Rotary, and Dual Action (DA) machines, these buffing pads deliver exceptional balance, durability, and performance. Featuring a convenient loop backing, they quickly attach to hook backing plates for seamless use. The 3/8” wool pad is ideal for removing moderate defects such as swirls, oxidation, scratches, and holograms, leaving surfaces smooth and refined. Perfect for professionals and enthusiasts who demand high-quality results.

Specs

Diameter: 6.25"

Pile: 3/8"

Material: 100% Wool

Application: Buffing

The SM Arnold Replacement 10" Microfiber Mop Head for Wash Mop XL is designed to keep your wash mop performing at its best. Made with super-absorbent microfiber chenille, it holds plenty of soap and water for thorough, streak-free cleaning. Ideal for washing cars, trucks, SUVs, and larger vehicles, this replacement bonnet is gentle on paint while delivering efficient results. Easy to remove, wash, and reuse, it can also be used for convenient hand washing.