Mosmatic

Upgrade your wash bay with the Mosmatic Brush Bucket 29.114—engineered for both performance and visual appeal. Made from polished stainless steel, this wall and floor-mounted bucket includes an integrated overflow and a 2" rear connection for efficient drainage. Its rugged, corrosion-resistant build and high-quality finish make it ideal for high-use wash bay environments. Delivered ready to install, it combines durability with state-of-the-art design to enhance both function and aesthetics.

Applications

• Car and truck wash bays

• Commercial vehicle cleaning stations

• Self-service car washes

• Agricultural and industrial wash zones

Key Features

• Wall and floor-mounted installation

• Polished stainless steel construction

• Integrated overflow and 2" rear drain connection

• Debris collection system for clean operation

• Width: 13.4", Height: 26.8", Diameter: 6.4"

• Delivered fully assembled and ready to install

Specs

Material Type: Stainless Steel

Widht: 13.4"

Height: 26.8"

Diameter: 6.4"

Weight: 18.5 lbs

The Mosmatic 29.124 is a floor-mounted dual wand holder designed to support two high-pressure lances simultaneously in self-serve or commercial wash bay environments. Equipped with integrated 0.8" weep connections, it provides essential freeze protection by allowing water to circulate and drain safely, especially in cold climates.

Constructed from polished stainless steel, this unit delivers long-lasting durability and corrosion resistance. With a height of 29", internal diameter of 2.4", and a 31.5" spacing between tubes, it securely holds two spray wands side by side—ideal for dual-lance setups or systems with foam and rinse separation.

Applications:

• Self-serve car wash bays with dual lance systems

• Truck and fleet washing operations

• Industrial washdown facilities requiring dual-tool access

• Outdoor installations exposed to freezing conditions

Features:

• Dual wand support with floor-mounted stability

• Integrated 0.8" weep connections for freeze protection

• Polished stainless steel for long-term corrosion resistance

• 2.4" internal tube diameter fits most commercial wands

• 31.5" tube spacing allows simultaneous access to both wands

Specs:

Product Type: Dual Wand Holder
Category: Car Wash
Brand: Mosmatic
Part Number: 29.124
Material: Polished Stainless Steel
Nominal: N/A
Pressure: N/A
Temperature: N/A
Threading In: N/A
Threading Out: N/A
Weight: 8.8 lbs

The Mosmatic Foam Head - 29.122 is a compact, high-performance foam accessory designed to enhance cleaning efficiency in self-service car washes, industrial sanitation, and food industry applications. This versatile foam head easily mounts to any existing spray wand, offering powerful foam generation through a built-in air injector nozzle that ensures consistent, rich foam for optimal chemical coverage and dirt removal.

Constructed from durable brass and measuring just 5" in length, the foam head features an adjustable flat spray nozzle for quick adaptation to various foam applications—perfect for both spot cleaning and wide coverage. Its G1/4" F thread-in connection and 1.6 nozzle size make it compatible with most commercial foam systems.

With a high-pressure tolerance of up to 4500 PSI, temperature resistance up to 212°F, and support for chemical solutions within pH 3–12, the Mosmatic 29.122 delivers professional-grade performance in a compact, easy-to-handle design. It’s a must-have upgrade for any wash program seeking improved results and greater operational flexibility.

Applications

• Self-serve and automated car wash systems

• Food processing facility sanitation

• Industrial equipment cleaning

• Fleet vehicle and heavy-duty wash bays

• Commercial cleaning and facility management

Features

• Compact & Versatile: Easily mounts to any spray wand for flexible use

• Adjustable Flat Spray Nozzle: Quickly switch between foam patterns

• Built-In Air Injector: Produces dense, consistent foam

• High-Performance Design: Handles up to 4500 PSI and 212°F

• Brass Construction: Durable and corrosion-resistant

• Wide Chemical Compatibility: Works with pH 3–12 solutions

• High Throughput: Supports up to 12 GPM

• Optimized for Efficiency: Boosts chemical saturation and cleaning power

Specs

Material Type: Brass

Pressure: 4500 psi 

Temperature:  212°F

Thread In: G1/4"F

Length: 5"

Throughput: max 12 gpm

Throughput medium: ph 3-12

Weight: 0.3 lbs

The Mosmatic 29.113 wand holder is a floor-mounted, stainless steel unit engineered to provide reliable upright storage of high-pressure spray lances. Designed with a built-in 0.8" weep connection, it prevents freezing by allowing constant water circulation—perfect for installations in cold weather regions.

Its polished stainless steel construction ensures long-lasting resistance to corrosion and harsh cleaning chemicals. With a height of 29.1" and an internal diameter of 2.4", this model is compatible with most commercial pressure washing wands.

Lighter than other spring-type versions, the 29.113 offers a streamlined, fixed design ideal for indoor and outdoor car wash bays.

Applications:

• Self-serve car wash facilities

• Truck wash stations and service bays

• Industrial washdown areas

• Cold-climate wash bays with anti-freeze requirements

Features:

• Integrated 0.8" weep connection for freeze protection

• Polished stainless steel body for durability and hygiene

• Fixed floor-mounted design for secure lance positioning

• Lightweight alternative to spring models

• Compatible with most spray guns and lances

Specs:

Product Type: Wand Holder
Category: Car Wash
Brand: Mosmatic
Part Number: 29.113
Material: Polished Stainless Steel
Nominal: N/A
Pressure: N/A
Temperature: N/A
Threading In: N/A
Threading Out: N/A
Weight: 5.1 lbs

The Mosmatic 29.099 Wand Holder Bracket is a durable, wall-mounted support bracket designed to provide a secure and organized mounting solution for various Mosmatic wand holders. Built for heavy-duty use, this bracket is compatible with models 29.097, 29.028, 29.113, and 29.121, offering seamless integration into your wash bay or service area.

With its compact 6.3" x 6.3" x 6.3" size, it’s ideal for maintaining a clean and professional appearance while ensuring quick access to your wand equipment.

Applications

• Car wash and self-service wash bays

• Equipment mounting in commercial cleaning stations

• Auto detailing shops and garages

• Wall-mounted storage for Mosmatic wands

• Designed for wall mounting with a compact footprint

• Compatible with Mosmatic models 29.097 / 29.028 / 29.113 / 29.121

• Dimensions: 6.3" × 6.3" × 6.3"

• Provides secure and stable wand support

• Enhances organization and workspace efficiency

• Built for long-lasting durability in wet environments

Specs

Length: 6.3"

Width: 6.3"

Height: 6.3"

Weight: 4.2 lbs

The Mosmatic 29.070 Hand Grip is an ergonomically designed accessory that enhances comfort and control during high-pressure cleaning tasks. Constructed from durable polypropylene (PP), this lightweight grip helps reduce operator fatigue and improves handling, especially during extended use.

Featuring a 1/4" NPTM thread inlet and 1/4" NPTF thread outlet, the hand grip integrates easily with various pressure washer components, making it a versatile addition to your cleaning setup.

Applications

• Pressure washer hose and gun connections

• Surface cleaners and spray wand assemblies

• Car wash, detailing, and industrial cleaning systems

• Manual high-pressure cleaning tools requiring better grip and control

Key Features

• Ergonomic PP hand grip for improved user comfort

• Thread Inlet: 1/4" NPTM | Thread Outlet: 1/4" NPTF

• Lightweight design for easy handling and reduced fatigue

• Compatible with a wide range of pressure washer accessories

• Durable construction for long-term use in demanding environments

Specs

Material Type: polypropylene (PP)

Thread IN: 1/4" NPTM

Thread OUT: 1/4" NPTF

Weight: 0.7 lbs

The Mosmatic 29.064 Complete Brush Head is a premium cleaning attachment designed for high-performance washing of delicate surfaces. Featuring 3.5" natural hogs hair bristles and a G1/4" F thread inlet, this brush head offers exceptional softness, flexibility, and compatibility for professional detailing and car wash systems.

Built for maximum surface protection, the brush provides scratch-free cleaning while maintaining superior water retention and bristle longevity—ideal for use in commercial and industrial environments.

Applications

• Vehicle detailing and car wash systems

• Manual and automated cleaning tools

• Safe cleaning of paint, chrome, and glass surfaces

• Professional-grade commercial wash stations

Key Features

• 3.5" hogs hair bristles for soft, swirl-free cleaning

• G1/4" F thread inlet for secure and universal connection

• Compatible with Mosmatic brush assemblies and tools

• Excellent durability and water absorption

• Designed for use on sensitive and high-gloss surfaces

• Ideal for professional detailing and car wash applications

Specs

Material Type: Hogs Hair 

Thread IN: G1/4"F

Bristle Length: 3.5"

Weight: 1.4 lbs

The Mosmatic 29.060 Foam Injector is a high-efficiency accessory for car wash pressure washer systems, designed to deliver consistent and effective foam application. Built with a 0.06" internal diameter, this injector ensures precise chemical dosing for optimal cleaning results.

It features a G1/4" F thread inlet and an R1/4" M thread outlet, and operates at 90 PSI with 0.8 GPM and up to 1450 PSI with 3.5 GPM, making it ideal for both low and high-pressure applications. Compact, durable, and reliable, it’s the perfect solution for foam-enhanced cleaning performance.

Applications

• Car wash foam systems and self-serve wash bays

• High-pressure cleaning with detergent injection

• Pre-soak and foam application for vehicles

• Commercial and industrial pressure washer setups

Key Features

• Thread Inlet: G1/4" F | Thread Outlet: R1/4" M

• 0.06" diameter for precise detergent delivery

• Operating range: 90 PSI / 0.8 GPM to 1450 PSI / 3.5 GPM

• Produces dense, even foam coverage

• Compatible with a wide range of pressure washer systems

• Durable construction for long-term reliability

Specs

Pressure: 90 PSI 0.8 GPM and 1450 PSI 3.5 GPM

Thread IN: G1/4"F

Thread OUT: R1/4" M

Diameter: 0.06"

Weight: 0.1 lbs

Mosmatic offfers a wide variety of high pressure trigger guns. From our relax actions guns that offer 90% reduced holding and 40% less trigger force to models with built in live swivels. Standard and Weep model designs are also available.

• Available with weep option
• Ergonomically molded
• Optional relax action design
• Pressure:3600 psi, Temperature:300°F IN3/8" NPTF, OUT 1/4" NPTF

Weep yes, Weight 1.8 lbs

Technical data

• Pressure: 2500 psi
• Temperature:250°F
• Inlet:1/2"NPTF

The Mosmatic 29.032 Weep System is engineered to provide freeze protection for pressure washer systems operating in cold environments. It maintains a controlled flow of water to prevent freezing in hoses and equipment, helping ensure system reliability year-round.

With a closure pressure of approximately 70–120 PSI and a flow rate of ~0.25 GPM at ~58 PSI, this system features a 0.3" diameter, and performs at 90 PSI with 0.8 GPM and 1500 PSI with 3.4 GPM. Compact, efficient, and built for commercial durability, it’s ideal for winterized cleaning setups.

Applications

• Cold-weather pressure washer systems

• Outdoor car wash and self-serve bays

• Industrial cleaning systems exposed to freezing temperatures

• Equipment that requires continuous weep flow to prevent ice buildup

Key Features

• Closure Pressure: ~70–120 PSI

• Flow Rate: ~0.25 GPM at ~58 PSI

• Operating Range: 90 PSI @ 0.8 GPM | 1500 PSI @ 3.4 GPM

• Diameter: 0.3 inches

• Prevents freezing and downtime in cold climates

• Compact and durable for long-term use in commercial settings

Specs

Diameter: 0.3"

Closure Pressure: ~70–120 PSI

Flow Rate: ~0.25 GPM at ~58 PSI

Operating Capacity: 90 PSI @ 0.8 GPM | 1500 PSI @ 3.4 GPM

Weight: 0.1 lbs

The Mosmatic 29.031 Weep System is a precision-engineered component designed to prevent freezing in cold weather pressure washing environments. By allowing a small, controlled flow of water through the line, this system helps maintain constant circulation and reduces downtime caused by ice buildup.

With a closure pressure of approximately 70–120 PSI and a flow rate of ~0.25 GPM at ~58 PSI, it offers reliable and consistent performance. Designed with a 0.4" diameter, it supports up to 90 PSI at 2.4 GPM and 1500 PSI at 9.0 GPM, making it compatible with a wide range of commercial cleaning setups.

Applications

• Cold-weather pressure washer systems

• Car wash bays and outdoor cleaning stations

• Industrial equipment prone to freezing

• Commercial wash systems requiring continuous water flow

Key Features

• Closure Pressure: ~70–120 PSI

• Flow Rate: ~0.25 GPM at ~58 PSI

• Operating Capacity: 90 PSI @ 2.4 GPM | 1500 PSI @ 9.0 GPM

• Diameter: 0.4 inches

• Helps prevent line freeze in cold environments

• Ideal for year-round performance and protection

Specs

Diameter: 0.4"

Closure Pressure: ~70–120 PSI

Flow Rate: ~0.25 GPM at ~58 PSI

Operating Capacity: 90 PSI @ 2.4 GPM | 1500 PSI @ 9.0 GPM

Weight: 0.1 lbs

The Mosmatic 29.030 Brush Holder is a universal, wall-mounted holder designed to organize and store all types of cleaning brushes. Built for durability and convenience, this holder offers a secure and accessible solution for keeping brushes off the floor and within easy reach in busy wash bays and detailing areas.

Ideal for both commercial and industrial environments, the brush holder promotes a tidy workspace and helps prolong the life of your cleaning tools by allowing them to dry properly between uses.

Applications

• Car wash bays and detailing shops

• Industrial cleaning stations

• Commercial garages and maintenance facilities

• Equipment rooms and tool storage areas

Key Features

• Wall-mounted design for easy installation and access

• Compatible with all types of cleaning brushes

• Keeps brushes organized and promotes faster drying

• Built for professional wash environments

• Helps maintain clean, efficient workspaces

• Durable construction for long-term performance

Specs

Material Type: Stainless Steel

Widht: 9.8"

Height: 3.5"

Diameter: 3.9"

Weight: 1.1 lbs

The Mosmatic 29.028 wand holder is a floor-mounted solution designed to securely hold high-pressure spray wands while offering internal weep flow protection. Featuring a 0.8" weep connection, this model supports cold-climate installations by allowing water to circulate and prevent freezing inside the tube.

Crafted from polished stainless steel for durability and resistance to corrosion, it features a compact and stable design suitable for both indoor and outdoor wash bays. The 29.1" length and 2.4" internal diameter fit most commercial-grade spray lances.

This model is ideal for high-volume facilities that require both functionality and robust performance from their lance holders year-round.

Applications:

• Self-serve and automatic car washes

• Industrial equipment cleaning zones

• Cold weather wash bays

• Truck and trailer wash stations

Features:

• 0.8" weep connection for freeze prevention

• Floor-mounted for stability and fixed positioning

• Polished stainless steel resists corrosion and chemical damage

• Universal fit for most pressure washer wands

• Built for continuous use in professional cleaning systems

Specs:

Product Type: Wand Holder
Category: Car Wash
Brand: Mosmatic
Part Number: 29.028
Material: Polished Stainless Steel
Nominal: N/A
Pressure: N/A
Temperature: N/A
Threading In: N/A
Threading Out: N/A
Weight: 6.0 lbs

The Mosmatic Brush Bucket – 29.026 offers a durable, polished stainless steel solution for wash bay brush storage. Designed for both wall and floor mounting, it features a built-in debris collector to maintain water cleanliness and reduce buildup. Its rugged construction and sleek, modern look upgrade any wash bay environment—both visually and functionally. Engineered with high-quality materials and craftsmanship, this brush bucket is delivered ready for immediate installation and long-term use.

Applications

• Car wash bays (self-serve or automated)

• Detailing stations and service shops

• Truck and fleet wash facilities

• Industrial cleaning environments

Features

• Polished stainless steel for durability and corrosion resistance

• Wall and floor mountable for flexible installation

• Integrated wash-out debris collector

• 2" drain for effective water removal

• Dimensions: Width 13.4", Height 26.8", Diameter 5.6"

• Rugged design with solid construction

• Delivered preassembled and installation-ready

Specs

Material Type: Stainless Steel

Widht: 13.4"

Height: 26.8"

Diameter: 5.6"

Weight: 18 lbs

The Mosmatic 29.015 Snap-Lock Feature is a precision-engineered quick-connect fitting designed for fast and secure nozzle changes in high-pressure cleaning systems. Constructed from stainless steel and aluminium, this durable component features a G1/4" male thread, ensuring easy integration with compatible pressure washer accessories.

Its snap-lock mechanism provides a reliable, tool-free connection, improving workflow efficiency and reducing downtime in professional wash and cleaning applications.

Applications

• High-pressure cleaning and pressure washer systems

• Quick-connect fittings for spray wands and nozzles

• Car wash and detailing setups

• Industrial and commercial cleaning equipment

Key Features

• Thread Inlet: G1/4" Male

• Made from stainless steel and aluminium for strength and corrosion resistance

• Snap-lock mechanism enables fast, secure connections

• Ideal for frequent nozzle change applications

• Compatible with a wide range of Mosmatic tools and fittings

• Designed for professional cleaning environments

Specs

Material Type: Stainless steel, aluminum

Thread IN: G1/4" M

Weight: 0.4 lbs