Mosmatic

The Mosmatic 60.307 Pulley is a durable and efficient support component designed to guide and manage hoses or cables in commercial wash systems. Featuring a 4'11" wire rope and a pulling force of up to 30N, this pulley ensures smooth operation and reduced wear on connected equipment.

With a 1.5" diameter and two pipe clamps included, this pulley system offers secure and flexible mounting options, making it ideal for use in overhead or wall-mounted cleaning setups.

Applications

• Hose and cable management in car wash systems

• Overhead spray boom or retractable line support

• Industrial cleaning equipment requiring guided movement

• Wall and ceiling installations in wash bays

Key Features

• Includes 4'11" wire rope for flexible range

• Pulling force: Up to 30N for reliable tension control

• Pulley diameter: 1.5 inches

• Comes with 2x pipe clamps for secure mounting

• Ideal for reducing wear on hoses and cables

• Built for high-performance wash environments

Specs

Pulling force: Up to 30N

Pulley diameter: 1.5"

Weight: 1.8 lbs

The Mosmatic DYG Swivel 57.163 is a premium, maintenance-free swivel designed for high-pressure, self-rotating cleaning equipment. Constructed from durable brass with a corrosion-resistant nickel-plated finish, this swivel offers maximum reliability and performance in tough industrial environments. The advanced triple bearing system—featuring two radial ball bearings and one thrust bearing—ensures smooth rotation under load. Its carbide seal system delivers exceptional sealing capabilities, and the bulkhead fitting allows for secure mounting in fixed applications.

Applications

• Surface cleaners

• Parts washers

• Tire and wheel cleaning systems

• High-pressure rotating equipment

• Industrial and commercial cleaning solutions

Key Features

• High-quality brass construction with nickel-plated finish

• Triple bearing system: 2x radial, 1x thrust ball bearing

• Carbide seal system for superior durability and leak prevention

• Maintenance-free design

• Corrosion-resistant materials for long service life

• Bulkhead fitting for secure mounting

• Thread IN: 3/8" NPTF | Thread OUT: G3/8" M

• Max Pressure: 4000 PSI

• Max RPM: 2000

• Max Temperature: 250°F

• Overall Diameter: 1.34"

• Overall Length: 3.14"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

Specs 

Pressure: 4000 psi

Temperature: 250°

RPM: max 2,000 rpm

Material Type:

Inner Part: Stainless steel

Seal: Carbide

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 G3/8" M

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Wrench Size 3 (SW3): 1.34"

 Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 3.14

Length 2 (L2): 0.39

Weight: 10.2 oz

Optimize your reclaim wash system with the Mosmatic Adaptor with Sieve 53.012. Precision-crafted from 100% stainless steel, this high-quality adaptor is built for strength, corrosion resistance, and high-pressure performance in demanding environments.

The integrated 200 mesh sieve effectively minimizes debris flow, preventing particles from reaching the gun and vehicle surface. This ensures cleaner results and protects equipment over time. Designed for ease of use, it is simple to dismantle and clean. With 3/8" NPTF (Female) inlet and 3/8" NPTM (Male) outlet threads, it offers broad compatibility across pressure washing systems. Rated up to 4000 PSI, and with a wrench size (SW) of 0.87", the Mosmatic 53.012 provides a secure and straightforward installation.

Applications

• Reclaim water pressure washing systems

• Car wash equipment

• Industrial and commercial cleaning systems

Key Features

• Constructed from 100% stainless steel for maximum durability

• 200 mesh integrated sieve for fine debris filtration

• Thread Inlet: 3/8" NPTF (Female)

• Thread Outlet: 3/8" NPTM (Male)

• Wrench Size (SW): 0.87"

• Pressure Rating: Up to 4000 PSI

• Quick to dismantle and clean for easy maintenance

Specs 

Material Type: Stainless Steel

Pressure: 4000psi

IN - 3/8" NPTF

OUT - 3/8" NPTM

Mesh Count - 200

SW - 0.87"

Weight - 0.13 lbs 

The Mosmatic 52.273 is a high-performance VER fitting designed to connect 3/8" NPT male to M22x1.5 threads in high-pressure cleaning systems. Built from solid brass and coated with nickel plating, this adapter ensures superior corrosion resistance, durability, and a reliable seal even under intense pressure.

With a pressure rating of up to 4000 PSI, this fitting is ideal for commercial and industrial applications, allowing seamless NPT-to-metric conversions for pressure washer hoses, spray guns, and system accessories. Its compact and precision-engineered design ensures easy installation and a secure, leak-free fit.

General Service Categories

• • • Commercial & Industrial Pressure Washing Systems
    • Auto Detailing and Fleet Cleaning Equipment
    • NPT-to-Metric Hose and Gun Conversions
    • Water-Fed Pole Tool Integration
    • High-Pressure System Repairs and Retrofitting
    • Custom Cleaning Equipment Configurations

Key Features

• • • Leak-Free Design: Provides a tight, secure connection
    • Heavy-Duty Build: Engineered for professional-grade performance
    • Compact Fit: Ideal for tight spaces and system integrations
    • Swiss-Made by Mosmatic: Known for precision and long-lasting quality

Specs

Material Type: brass, nickel plated

Pressure: 4000 psi

Threading In: 3/8"NPTM

Threading Out: M22x1.5

Maintain peak performance of your Mosmatic swivel systems with the Mosmatic WDC/WDB Swivel Seal Kit 43.904. This high-quality replacement kit includes durable NBR O-rings designed specifically for WDC and WDB Swivels. Ideal for high-pressure hose reels, ceiling booms, and high-pressure cleaners, the kit ensures a reliable, leak-free seal in demanding environments. Extend the life of your equipment with this essential seal kit for professional cleaning and pressure applications.

The Mosmatic WDB Swivel 43.251 is a precision-engineered, nickel-plated brass swivel designed for high-pressure cleaning applications. Ideal for use in hose reels, ceiling booms, and pressure washers, this compact swivel features a sliding bearing for reliable, smooth rotation under load. Sealed with a durable O-ring NBR, it delivers long-lasting leak protection in tough environments. With a thread configuration of 1/4" NPTF (inlet) to 1/4" NPTM (outlet), this swivel supports up to 4000 psi, 30 RPM, and 250°F, making it a powerful solution for compact, high-pressure systems.

Applications

• High-pressure hose reels

• Overhead or wall-mounted ceiling booms

• High-pressure washers and cleaning systems

• Stationary and mobile wash bays

• Car wash equipment and service stations

Key Features

• Durable nickel-plated brass construction for corrosion protection

• Sliding bearing design for smooth and controlled rotation

• Thread IN: 1/4" NPTF | Thread OUT: 1/4" NPTM

• Compact dimensions: Height – 1.06" | Overall Length – 1.89"

• Nominal Width (NW): 1/4"

• Handles pressures up to 4000 psi

• Operates at temperatures up to 250°F

• Supports 30 RPM for low-speed, high-pressure applications

• O-ring NBR seal for reliable, leak-resistant performance

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: 30

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTF

Thread Out: G2 1/4" NPTM

Nominal Width (NW): 1/4"

Wrench Size  (SW): 0.87

Height (H): 1.06

Length 1 (L1): 1.77

Length 2 (L2) (overall length): 1.89

Length 3 (L3): 1.14

Length 4 (L4): 1.10

Length 5 (L5): 0.39

Weight:10.0 oz

The Mosmatic DXG 90° Swivel 37.463 is a high-precision nickel-plated brass swivel engineered for high-RPM, self-rotating cleaning applications. Ideal for surface cleaners, parts washers, and tire cleaning systems, this 90-degree swivel is built to deliver exceptional durability and smooth operation in tough environments. It features a triple bearing system with two radial ball bearings and one thrust ball bearing for consistent, stable rotation. The ceramic seal system ensures extended leak-free performance under high-pressure conditions. With a corrosion-resistant finish, bulkhead fitting for secure mounting, and a maintenance-free design, this swivel is ready for demanding professional use.

Applications

• Surface cleaners

• Parts washers

• Tire and wheel cleaning tools

• High-RPM self-rotating cleaning equipment

• Commercial and industrial pressure washing

Key Features

• Nickel-plated brass body for excellent corrosion resistance

• 90-degree configuration for compact or angular setups

• Triple bearing system: 2x radial, 1x thrust ball bearing

• Ceramic seal system for long-lasting, leak-free performance

• Designed for high-RPM, self-rotating applications

• Bulkhead fitting for secure mounting

• Maintenance-free operation

• Thread IN: 3/8" NPTF | Thread OUT: G3/8" M

• Max Pressure: 2500 PSI (17 MPa)

• Max RPM: 2000

• Temperature Range: 40°F – 250°F

• Overall Diameter: 1.34"

• Overall Length: 3.30"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

Specs 

Pressure: 2500 psi (17 MPa)

Temperature: 40°- 250°

RPM: max 2,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: Ceramic

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 G3/8" M

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Wrench Size 3 (SW3): 1.34"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 3.30

Length 2 (L2): 0.39

Weight: 13.4 oz

The Mosmatic DXG Swivel 37.163 is a premium brass swivel with a corrosion-resistant nickel-plated finish, engineered for high-RPM, self-rotating cleaning systems. Designed for use in surface cleaners, parts washers, and tire cleaning equipment, this swivel delivers smooth operation, precision performance, and long-lasting durability. It features a triple bearing system—two radial ball bearings and one thrust ball bearing—for optimal rotation stability. The integrated ceramic seal system ensures leak-free reliability even under high pressure. With a bulkhead fitting for secure mounting and a maintenance-free design, it's built for industrial-grade performance.

Applications

• Surface cleaners

• Parts washers

• Tire and wheel cleaning systems

• High-RPM self-rotating tools

• Industrial and commercial pressure washing systems

Key Features

• Brass construction with corrosion-resistant nickel plating

• Triple bearing system: 2x radial, 1x thrust ball bearing

• Ceramic seal system for extended leak protection

• Designed for high-RPM, self-rotating cleaning applications

• Maintenance-free performance in demanding environments

• Bulkhead fitting for secure, fixed installation

• Thread IN: 3/8" NPTF | Thread OUT: G3/8" M

• Max Pressure: 2500 PSI (17 MPa)

• Max RPM: 2000

• Temperature Range: 40°F – 250°F

• Overall Diameter: 1.34"

• Overall Length: 3.14"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

Specs 

Pressure: 2500 psi (17 MPa)

Temperature: 40°- 250°

RPM: max 2,000 rpm

Material Type: Brass, Nicket plated

Inner Part: Stainless Steel

Seal: Ceramic

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 G3/8"M

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Wrench Size 3 (SW3): 1.34"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 3.14"

Length 2 (L2): 0.39"

Weight: 9.7 oz

Ensure long-lasting, high-performance operation of your Mosmatic swivel with the Mosmatic Seal Kit 36.908 - NW 3/8". This carbide seal kit is specifically designed for DYG, DYT, and DYU Swivels with a nominal width of ⅜ inch. Engineered for extreme durability in high-pressure, high-RPM environments, it is ideal for self-rotating cleaning systems such as surface cleaners, wall cleaners, parts washers, and tire cleaners. This replacement kit delivers exceptional sealing performance and reliability in demanding industrial cleaning applications.

The Mosmatic DGS Swivel 30.153 is a premium brass, nickel-plated swivel designed for high and low pressure cleaning systems, hose connections, and hydraulic applications. Built for durability and smooth operation, this swivel ensures low torque performance under full pressure, ideal for commercial and industrial setups.

Engineered with sealed stainless steel bearings—including one thrust and one radial ball bearing—this swivel offers exceptional rotational efficiency and longevity. The integrated O-ring NBR sealing system (with optional EPDM or FKM materials) ensures tight sealing even in challenging environments.

Applications

• High and low-pressure hose connections

• Ceiling and wall-mounted booms

• Hydraulic equipment

• Commercial and industrial cleaning

• Automatic car washes

• Hose reels and rotating arms

Key Features

• Model: Mosmatic DGS 30.153

• Material: Brass, nickel-plated

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 3/8" NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearings: 1x thrust + 1x radial ball bearing

• Low Torque: Smooth rotation at full pressure

• Maintenance-Free: Sealed stainless steel bearing system

• Overall Diameter: 0.98"

• Overall Length: 2.36"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTM

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.36"

Length 2 (L2): 0.47"

Diameter (D) (overall diameter): 0.98"

Weight: 4.6 oz

The Mosmatic 29.115 wand holder is a floor-mounted, polished stainless steel support solution designed for professional car wash environments. With a built-in 0.8" weep connection, this model is engineered to allow constant water flow through the unit, protecting it from freezing in cold-weather installations.

Its streamlined design and compact weight make it ideal for indoor or outdoor use where durability, stability, and low maintenance are critical. At 29" in height and 2.4" in diameter, it supports standard commercial lances, making it a universal fit for most self-serve and fleet wash applications.

Applications:

• Self-service and commercial car wash bays

• Industrial and fleet washdown stations

• Cold climate installations with freeze protection

• Equipment wash areas requiring durable lance storage

Features:

• Floor-mounted for stable, upright lance storage

• Integrated 0.8" weep connection prevents freezing

• Lightweight stainless steel body for easy handling and long service life

• Compatible with most standard spray guns and lances

• Polished finish for resistance to corrosion and chemicals

Specs:

Product Type: Wand Holder
Category: Car Wash
Brand: Mosmatic
Part Number: 29.115
Material: Polished Stainless Steel
Nominal: N/A
Pressure: N/A
Temperature: N/A
Threading In: N/A
Threading Out: N/A
Weight: 4.4 lbs

The Mosmatic 29.103 Chewing Gum Remover Nozzle (Size #4) is a high-efficiency cleaning tool engineered to remove chewing gum and persistent surface stains with precision. Designed to operate with its own trigger gun, this nozzle delivers focused cleaning power for demanding urban, commercial, and public environments.

Equipped with high-pressure jets angled at 45°, it cuts through gum and grime, lifting residue without damaging surfaces. Featuring a G1/4" F (Female) thread, the nozzle integrates seamlessly into compatible pressure washing systems, providing a reliable and powerful gum removal solution.

Applications

• Chewing gum removal from sidewalks and walkways

• Cleaning of high-traffic commercial and municipal areas

• Surface restoration on concrete, tile, stone, and brick

• Targeted stain removal in public spaces and transit areas

Key Features

• Size #4 nozzle engineered for chewing gum and stain removal

• Operates with dedicated trigger gun for controlled activation

• 45° high-pressure jets cut and lift debris effectively

• Thread Inlet: G1/4" F (Female) for system compatibility

• Durable and built for heavy-duty, repeated professional use

• Ideal for urban cleaning crews, maintenance teams, and contractors

Specs 

Size: 3#

Thread IN: G1/4"F

Weight: 1.3lbs 

The Mosmatic Ceiling Boom DKPL (66.699) is a heavy-duty straight-arm boom engineered for extended reach and reliability in a wide range of industrial settings. With an impressive length of 19 ft 0 in, this boom is ideal for large-scale applications where coverage and mobility are critical. Its 360° smooth rotation and sealed bearing design ensure fluid motion and minimal maintenance, even in high-demand environments.

Rated for up to 4000 PSI and 250°F, this boom handles water, oil, and air with a pH range of 3–12. It features 3/8" NPTF inlets (top and side) and a 3/8" outlet, allowing for seamless integration into existing systems. Perfect for use in car washes, food processing, mining operations, and manufacturing, the DKP boom offers unmatched durability and versatility. It is also designed with environmental sustainability in mind.

Applications

• Large self-service and automatic car wash bays

• Food and beverage processing facilities

• Mining operations and industrial fluid handling

• Manufacturing and heavy-duty plant systems

• Compressed air, gas, and liquid delivery networks

Key Features

• 19 ft straight-arm ceiling boom for maximum reach

• 360° rotation with sealed bearing design

• 3/8" NPTF inlets (top and side) + 3/8" outlet

• Rated for 4000 PSI and 250°F

• Compatible with water, oil, and air (pH 3–12)

• Ideal for expansive and demanding industrial use

• Environmentally friendly and low-maintenance

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

Thread In: 3/8" NPTF

Thread Out: 3/8" NPTF

Length: 19'0"

Throughput/medium: water, oil, air at pH 3-12 

Weight: 39.5 lbs

Designed for large-scale industrial wash operations, the Mosmatic WSA Wall Boom Extension provides unmatched reach and flexibility. With a total boom length of 19'8", this extension is perfect for truck washes, aircraft maintenance facilities, mining sites, and other large-area cleaning applications.

Engineered for smooth and comfortable operation, the WSA extension allows users to easily maneuver around oversized vehicles or equipment. When paired with a DKP ceiling boom, the combined system enables a working radius of up to 39 feet. Built with Mosmatic's signature stainless steel construction, this boom delivers exceptional durability in high-pressure, high-temperature conditions.

Applications

• Truck and fleet wash stations

• Aircraft and helicopter cleaning

• Mining and construction equipment wash bays

• Industrial and plant maintenance

Key Features

• Extra-long boom extension: 19'8" total length

• Max extension reach: 19'0"

• Seamless integration with DKP ceiling boom for 39' working radius

• Inlet (bottom): 3/8" NPTF | Outlet: 3/8" NPTF

• Max pressure: 4000 psi | Max temperature: 250°F

• Medium compatibility: water, oil, air (pH 3–12)

• Heavy-duty stainless steel design

• Delivered ready to install

• Smooth and flexible telescopic movement

The Mosmatic 60.9003 Wall Boom Extension ensures efficiency and full-range mobility in even the most demanding industrial wash environments.

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

Thread In: 3/8" NPTF

Thread Out: 3/8" NPTM

B: 19'8"

Max. Length: 19'0"

Throughput/medium: water, oil, air at pH 3-12 

Weight: 243 lbs

Experience precision-engineered tank cleaning with the Mosmatic Tank Cleaner TAR-09 – 101.672. Built entirely from high-grade stainless steel, this tank cleaner is designed to excel in demanding environments exposed to chemical and mechanical stress. Its compact construction and innovative technology offer a self-rotating, maintenance-free system that ensures comprehensive, internal 360° cleaning performance. The TAR-09 is engineered with infinitely adjustable rotation speed for precise control, enabling you to match cleaning intensity to various pump capacities and conditions. Whether used in food processing, chemical, or industrial sectors, this cleaner ensures optimal efficiency with minimal maintenance intervention.

Applications

• Industrial tank and vessel cleaning

• Food and beverage processing facilities

• Pharmaceutical and chemical production

• Transportation containers and IBCs

• Brewing and dairy industry sanitation

• CIP (Clean-in-Place) systems

Features

• Stainless steel construction for superior durability and corrosion resistance

• 360° self-rotating design for complete internal cleaning coverage

• Infinitely adjustable rotation speed via single-screw control

• Integrated magnetic brake for reliable performance

• Operates at up to 2900 psi and 250°F

• Supports flow rates between 13 and 26 GPM

• 1/2" NPTF thread-in, 3/8" nominal width

• 20° drive angle with a max 60 RPM main axis

• Compact 5.16" diameter footprint

• Requires 2 x EG-nozzles (sold separately)

Specs

Pressure: 2900 psi

Temperature: 250°

RPM: max 60 rpm

Material Type: Stainless steel

Seal: Carbide

Throughput/medium: ph 3-12

Thread In: 1/2" NPTF

Nominal Width (NW): 3/8"

Diameter (D1) (overall diameter): 5.16"

Drive Angle: 20°

Flow Rate: 13 -26 gpm

Weight: 15 lbs