Mosmatic

The Mosmatic EG Nozzle Size 04 is a premium straight-jet nozzle designed for high-pressure cleaning applications. Constructed from hardened stainless steel, it handles up to 5000 PSI and provides a consistent 0º spray angle for precise, concentrated cleaning. This nozzle is intended for use with the Mosmatic EG Stabilizer Nozzle (not included) and requires no threading for installation. Part of a series available in sizes 2 to 20, the Size 04 nozzle is ideal for tasks that demand accuracy and durability.

Size of EG nozzle is determined by the psi (pressure) and GPM (Gallons Per Minute) of your pressure washer.

**See charts for more details on pressure, flow rate, and pump capacity. 

Applications:

• Commercial pressure washing systems

• Surface cleaners using the EG Stabilizer setup

• Industrial cleaning of machinery and equipment

• Vehicle and fleet maintenance

• Sanitation in food and agricultural environments

Features:

• 0º spray angle for direct, focused cleaning

• Rated for up to 5000 PSI of pressure

• Hardened stainless steel for strength and longevity

• No-thread design; used exclusively with EG Stabilizer Nozzle

• Available in a full range of sizes from 2 to 20

Specs

Material Type: Stainless Steel

Size: 04

Pressure: 5000 psi (at 1 nozzle, see chart for more details)

Mosmatic Rotor arms can withstand up to 4000 psi, are precision wielded and balanced. This rotor arm can be used on:

• Mosmatic Contractor Series Surface Cleaner
• Mosmatic Commercial Series Surface Cleaner

The Mosmatic TRL Wand – 81.925 is a high-performance cleaning tool engineered for efficient interior cleaning of tanks, containers, and portable toilets. This complete wand system includes a powerful rotating spinner head with three integrated HP nozzles—two adjustable side jets and one forward-facing nozzle—to deliver a thorough 360° clean while reducing forward spray blowback.

Delivered ready for immediate installation, the TRL Wand features a 63-inch ergonomic design, built-in swivel, and IPC compatibility for ease of use in professional cleaning environments. Designed to handle up to 4000 PSI and 250°F, it provides long-lasting durability for commercial and industrial sanitation needs.

Applications

• Portable toilet and restroom sanitation

• Trash can and waste bin cleaning

• Interior tank and plastic container washdown

• Food service and sanitation industries

Key Features

• Complete Wand System: Delivered ready to install with spinner head

• HP Nozzles: 3x 0502 nozzles (2 side, 1 forward)

• Built-In Swivel: For smooth maneuverability

• Ergonomic & Durable: 63" length, 6" diameter, short cage

• High-Performance: 4000 PSI, 250°F max temp, pH 3–12

• Material Compatibility: IPC-compatible, corrosion-resistant design

• Blowback Prevention: Side nozzles reduce spray reversal

Important: Do not use unprotected!

Specs

Pressure: 4000 PSI 

Temperature: 250°F

Thread IN: 3/8" NPTF

Diameter: 6"

Swivel: Yes

Length: 63"

Cage: Short

IPC compatible: Yes

HP-Nozzle: 3x 0502

Weight: 5.5

The Mosmatic Duct Cleaner TYR 2F - 81.486 - Fixed is a high-efficiency, self-rotating cleaning unit engineered for vertical cleaning tasks in ducts, trash chutes, pipes, totes, manholes, and enclosed containers. This maintenance-free stainless steel system features a fixed-position rotating head within a protective cage, delivering high-pressure spray precisely where it's needed for consistent, deep cleaning.

Equipped with non-adjustable arms and a fixed spray angle, the TYR 2F is specifically designed for vertical cleaning applications, offering repeatable, focused coverage in shafts and confined environments. With two arms and two nozzle connections, it is rated for up to 4000 psi and 250°F, making it ideal for industrial, commercial, and sanitation environments.

Important: Do not use unprotected! 

2 x ⅛" Nozzles not included

Applications

• Vertical trash chute and duct cleaning

• Pipe and shaft interior washing

• Tote and container cleaning

• Manhole and confined space sanitation

• Ventilation and exhaust system maintenance

• Food-grade and industrial facility cleaning

Features

• Fixed Spray Angle Arms: Purpose-built for vertical applications—no adjustments needed.

• Self-Rotating, Maintenance-Free Operation: High-pressure cleaning with no internal drive mechanisms.

• Two Arms with Two Nozzle Connections: Ensures optimal spray coverage (uses two ⅛" nozzles, not included).

• High Pressure & Temperature Rating: Withstands up to 4000 psi and 250°F at 2000 rpm.

• Stainless Steel Construction: 24" diameter and 2.8" height for long-lasting durability in harsh environments.

• Chemical Compatibility: Effective with cleaning solutions from pH 3 to 12.

• 3/8" NPTF Threaded Inlet: Secure, leak-free connection for industrial pressure systems.

Videos

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: 2000

Material Type:  Stainless steel

Throughput/medium: ph 3-12 

Thread In: 3/8" NPTF

Thread Out (for nozzles): 2 x ⅛"

Diameter: 24"

Height: 2.8"

Weight: 3.9 lbs.

The Mosmatic Duct Cleaner TYR 2F - 81.426 - Fixed is engineered for high-efficiency internal cleaning of vertical ducts, trash chutes, pipes, totes, manholes, and other narrow containers. This self-rotating, maintenance-free unit features a durable stainless steel head housed in a protective cage that directs powerful high-pressure spray precisely to the cleaning surface.

Built with non-adjustable arms and a fixed spray angle, this unit is optimized for vertical cleaning applications, delivering consistent and focused performance in hard-to-reach spaces. Featuring two arms and two nozzle connections, the TYR 2F is designed for simple installation and reliable use under pressures up to 4000 psi and temperatures up to 250°F.

Important: Do not use unprotected! 

2 x ⅛" Nozzles not included

Applications

• Vertical trash chute and shaft cleaning

• Duct and ventilation pipe maintenance

• Tote and tank interior washing

• Manhole and confined space cleaning

• Industrial facility sanitation

• Food processing and equipment cleaning

Key Features

• Fixed Spray Angle Arms: Ideal for vertical applications like trash chutes and narrow shafts.

• Self-Rotating, Maintenance-Free Design: Operates without motors or internal drive parts for dependable performance.

• Two Arms with Two Nozzle Connections: Efficient, concentrated spray coverage (requires two ⅛" nozzles, not included).

• High Pressure & Temperature Rated: Handles up to 4000 psi and 250°F at 2000 rpm.

• Stainless Steel Construction: 6" diameter and 2.8" height—compact and durable for industrial use.

• Chemical Compatibility: Supports cleaning agents with pH values from 3 to 12.

• 3/8" NPTF Threaded Inlet: Ensures secure, leak-proof connection for high-pressure systems.

Videos

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: 2000

Material Type:  Stainless steel

Throughput/medium: ph 3-12 

Thread In: 3/8" NPTF

Thread Out (for nozzles): 2 x ⅛"

Diameter: 6"

Height: 2.8"

Weight: 2.2 lbs.

The Mosmatic Ceiling Boom DKP (66.039) is a high-performance straight-arm ceiling boom built for industrial-grade applications across a variety of sectors. Measuring 6 ft 3 in, this boom offers 360° smooth rotation and features a sealed bearing design to ensure long-lasting, maintenance-free operation in demanding environments.

Rated for up to 4000 PSI and 250°F, this boom is designed to handle water, oil, and air across a pH range of 3–12. With 3/8" NPTF inlets (top and side) and a 3/8" outlet, it integrates easily into existing systems. Whether used in car washes, food production, manufacturing, or mining operations, this environmentally friendly boom delivers flexibility, performance, and durability.

Applications

• Self-service and automatic car washes

• Food and beverage processing environments

• Industrial manufacturing and assembly lines

• Mining and heavy equipment facilities

• Air, fluid, and chemical distribution systems

Key Features

• 6 ft 3 in straight-arm ceiling boom

• 360° smooth rotation for unrestricted movement

• Sealed bearing design for extended service life

• 3/8" NPTF inlets (top and side) and 3/8" outlet

• Rated for 4000 PSI and 250°F

• Compatible with water, oil, and air (pH 3–12)

• Ideal for multi-industry fluid and air handling

• Environmentally friendly, low-maintenance build

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

Thread In: 3/8" NPTF

Thread Out: 3/8" NPTF

Length: 6'3"

Throughput/medium: water, oil, air at pH 3-12 

Weight: 23 lbs

The Mosmatic 58.163 DYF is a high-pressure brass swivel featuring a 3/8" NPTF inlet and a G3/8" BSPP (male) outlet—making it ideal for connecting NPT-threaded lines to BSP-threaded tools or accessories.

This 360° maintenance-free swivel supports up to 4000 psi and includes a carbide seal, sealed bearing system, and weep holes for early detection of seal wear. Its nickel-plated brass housing ensures excellent corrosion resistance in demanding cleaning environments.

Applications

• Pressure washers with BSPP connections

• Surface cleaners and wash booms

• Car wash arms and rotating nozzles

• Industrial fluid systems needing NPT-to-G thread

Features

• 360° full rotation

• Carbide seal with weep hole alert

• Nickel-plated brass body for corrosion resistance

• Maintenance-free, sealed bearing system

• Rated up to 4000 psi

• Ideal for NPT-to-BSPP transitions

Specs

Product Type: High-pressure swivel – DYF
Part Number: 58.163
Pressure: 4000 psi
Temperature: 250°F
RPM: max. 2,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: Carbide
Throughput / Medium: pH 3–12 / filtered 10 microns / compressed air (290 psi)
Thread In (G1): 3/8" NPTF
Thread Out (G2): G3/8" M
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Diameter (D): 2.36"
Length 1 (L1): 1.49"
Length 2 (L2): 0.39"
Weight: 13.2 oz

The Mosmatic DGK Swivel 32.549 – 90 Degrees is designed for high-performance pressure cleaning, hydraulic systems, and hose connections. Built with a durable stainless steel/brass body and nickel-plated finish, this swivel delivers exceptional corrosion resistance and longevity in industrial environments.

Featuring a thrust ball bearing and a reliable O-ring NBR seal system (optional EPDM or FKM), this swivel supports live rotation under full pressure with minimal torque. Its 90-degree compact design ensures easy integration into tight setups while keeping hoses tangle-free.

Applications

• High-pressure spray guns

• Hydraulic hose assemblies

• Wash bays and ceiling booms

• Tangle-free hose connection systems

• Industrial pressure cleaning tools

Features

• Material: Stainless steel/brass with nickel plating

• Thread IN (G1): 3/8" NPTM

• Thread OUT (G2): 3/8" NPTF

• Overall Length: 1.06"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.94"

• Maximum Pressure: 4000 PSI

• Maximum RPM: 30

• Max Temperature: 250°F

• Seal System: O-ring NBR (EPDM or FKM optional)

• Bearing System: 1x thrust ball bearing

• Design: 90° swivel for optimized directional flow

• Performance: Maintenance free, low torque, high durability

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTM

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 1.06"

Length 2 (L2): 0.39"

Weight: 5.8 oz

The Mosmatic DGS Swivel 30.654 is a high-quality brass, nickel-plated swivel engineered for high and low-pressure cleaning, hydraulic hose connections, ceiling booms, and other industrial applications. Designed for smooth performance under pressure, it features very low torque, sealed stainless steel bearings, and maintenance-free operation.

With a robust design including 1x thrust and 1x radial ball bearing, and an O-ring NBR seal system (upgradeable to EPDM or FKM), this swivel ensures reliable rotation at high PSI, making it an ideal solution for demanding environments.

Applications

• Pressure washers and cleaning systems

• Hydraulic and pneumatic hose assemblies

• Ceiling booms and rotary arms

• Car wash equipment

• Hose reels and industrial setups

Key Features

• Model: Mosmatic DGS 30.654

• Material: Brass, nickel plated

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 3/8" NPTF

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearings: 1x thrust, 1x radial ball bearing

• Low Torque Operation: Smooth rotation at high pressure

• Maintenance-Free: Sealed stainless steel bearings

• Overall Diameter: 0.98"

• Overall Length: 2.71"

• Nominal Width (NW): 3/8"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 3/8"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.87"

Length 1 (L1) (overall length) : 2.71"

Diameter (D) (overall diameter): 0.98"

Weight: 5.6 oz

The Mosmatic HP Gun <Neo> - 29.134 is engineered for maximum performance, comfort, and reliability in demanding cleaning environments. Designed with an ergonomic molded grip and Low Trigger Force technology, it reduces holding force by 90% and trigger effort by 40%, making extended operation easy and comfortable. This model features a built-in swivel for enhanced maneuverability and a Weep function, allowing water to continually leak to prevent freezing during cold weather use. Rated for up to 5000 PSI and 300°F, the gun is built to handle heavy-duty, professional cleaning applications. It includes a 3/8" NPTF inlet and a 1/4" NPTF outlet for secure and reliable connections.

Applications

• Cold-weather and winter cleaning operations

• Industrial and commercial pressure washing

• Fleet and vehicle maintenance

• Agricultural equipment cleaning

• Construction machinery and site washdowns

Features

• Ergonomic molded handle for operator comfort

• Low Trigger Force: 90% reduced holding, 40% less trigger effort

• Integrated swivel for easy maneuverability

• Weep function prevents freezing in cold conditions

• Handles up to 5000 PSI pressure

• Temperature rated up to 300°F

• Thread Inlet: 3/8" NPTF

• Thread Outlet: 1/4" NPTF

• Durable and professional-grade construction

Specs 

Pressure: 5000 psi

Temperature: 300°F

Weep Function: Yes

Low Trigger Force: Yes

Groove: No

Swivel: Yes

Thread In: 3/8" NPTF

Thread Out: 1/4" NPTF

Color: Purple

Weight: 1.3lbs

The Mosmatic Foam Cannon 29.213 is a premium, high-pressure foam applicator designed for professional pre-washing in automotive care, sanitation, and industrial cleaning. Featuring a 2.0 GPM flow rate, 2300 PSI operating pressure, and a 1.3 mm diameter injector, this foam cannon ensures thorough and consistent foam coverage for effective surface pre-treatment.

Engineered with stainless steel components and a durable chemical bottle with a 1.5" extra-large filling opening, the unit simplifies operation and maintenance. The integrated 50-mesh filter prevents clogs and ensures pure, uninterrupted chemical delivery. Ideal for medium throughput applications (up to 8 GPM) and chemicals with a pH range of 3 to 12.

Note: HP gun, HP coupling, and handle are not included and must be ordered separately.

Applications:

• Automotive detailing and car wash pre-treatment
• Commercial vehicle cleaning
• Sanitation and hygiene sectors
• Industrial surface pre-treatment
• Pressure washing services

Features:

• Flow Rate: 2.0 GPM with 1.3 mm diameter injector
• Operating Pressure: Up to 2300 PSI (160 bar)
• Max Temperature: 140°F (60°C)
• Throughput: Handles up to 8 GPM
• Chemical Range: Supports pH 3–12
• Large Capacity Bottle: 34 fl oz with wide 1.5" opening for easy refill
• Stainless Steel Construction: Robust, rust-resistant, and built for durability
• Integrated 50-Mesh Filter: Ensures clean chemical application
• Clear Fill Level Scale: Easy chemical monitoring at a glance
• Professional Design: Optimized for ergonomic handling and efficient foam application

Specs

Pressure: 2300 psi

Temperature: 140°F

Throughput: 8 gpm

Throughput medium: ph3-12

Threading IN:  Quick Connect Plug 0.47"

GPM: 2.0

Injector: 1.3" diameter

Height: 8.6"

Width: 4.1"

Weight: 2.31 lbs

The Mosmatic DGVI Swivel 32.778 is a durable, stainless steel swivel engineered for high-pressure hose reels, HP-Guns, and hydraulic systems. With a robust 3/8" NPTM inlet, this swivel ensures live rotation under full system pressure, helping to prevent hose tangling and improve workflow efficiency.

Designed for reliability and performance in demanding environments, it features a single thrust ball bearing, corrosion-resistant stainless steel housing, and a maintenance-free O-ring NBR seal system—with optional EPDM or FKM seals available for compatibility with specific applications.

Applications

• High-pressure hose reels

• Hydraulic and pneumatic systems

• HP-Guns and industrial sprayers

• Tangle-free hose connections

• Commercial cleaning systems

Features

• Material: Full stainless steel construction

• Thread IN (G1): 3/8" NPTM

• Overall Length: 2.90"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.94"

• Max Pressure: 5000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Bearing System: 1x thrust ball bearing

• Seal System: O-ring NBR (optional EPDM or FKM)

• Design: Compact, corrosion resistant, maintenance free

Specs 

Pressure: 5000 psi (35 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

D (Diameter): ø0.60"

Thread In: G1 3/8" NPTM

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.94"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.90"

Length 2 (L2): 0.47"

Weight: 5.1 oz

The Mosmatic 70.017 High-Pressure Quick Connect Coupler is engineered to provide fast, secure, and leak-proof connections in high-performance pressure washing systems. Crafted from premium stainless steel, this female-threaded coupling ensures long-lasting durability and corrosion resistance in even the toughest cleaning environments.

With a 3/8" NPTF thread, 0.6" diameter, and 3/8" nominal width (NW), it offers precise fit and compatibility with a wide range of commercial cleaning equipment. Designed for quick assembly and disassembly of hoses, guns, and wands, this coupling helps reduce downtime while maintaining maximum efficiency. Its wrench size (SW) of 0.94" and 5000 PSI rating make it ideal for industrial-grade operations.

Applications

• High-pressure hose and spray gun connections

• Industrial and commercial pressure washing systems

• Quick-connect systems for surface cleaners and lances

• Vehicle wash and equipment cleaning setups

Key Features

• Made from 100% stainless steel for strength and corrosion resistance

• 3/8" NPTF thread, 0.6" diameter, and 3/8" nominal width (NW)

• Wrench Size (SW): 0.94"

• Handles up to 5000 PSI of working pressure

• Enables quick, safe, and tight connections

• Ideal for fast equipment changeovers in high-pressure systems

Specs 

Material Type: Stainless Steel

Pressure: 5000psi

Thread: 3/8" NPTF 

Nominal Width (NW): 3/8"

Wrench Size (SW): 0.94"

Diameter: 0.6"

Weight - 3.50oz

The Mosmatic Aqua Pro Surface Cleaner FL-SAR 520 (Part #80.789) is a high-performance, environmentally responsible solution for professional surface cleaning. Featuring a fully integrated water recovery system, this unit eliminates the need for an external industrial vacuum. A Venturi nozzle, mounted directly to the housing, enables wastewater to be collected and discharged using a standard vacuum hose.

The Aqua Pro is designed for flexibility—you can clean, recover, or do both simultaneously. Its robust stainless steel construction, height-adjustable frame, precision-balanced rotor arms, and high-rpm DYCI swivel ensure powerful, consistent performance under high pressure. Ideal for both indoor and outdoor environments, this is a go-to cleaner for professionals who prioritize efficiency and sustainability.

Applications

• Commercial and industrial floor cleaning

• Parking garages, sidewalks, and loading docks

• Food processing areas and sanitation zones

• Indoor facility maintenance

• Public spaces and municipal surfaces

Features

• Integrated Venturi recovery system—no external vacuum required

• Black anodized aluminum suction device for efficient wastewater drainage

• Dual HP guns: one for high-pressure cleaning, one for recovery operation

• DYCI stainless steel swivel (Part No. 55.253) with self-lubricated ball bearings

• Dual spring-based carbide seal system for long-lasting performance

• Stainless steel frame with adjustable height for optimal cleaning results

• Four 4" stainless steel casters (Part No. 80.956) with custom brackets for mobility

• Precision-balanced rotor arms rated up to 4000 PSI

• Max pressure: 5000 PSI

• Max temperature: 250ºF

• Inlet: 3/8" NPTF

Video

Included

Swivel: 1 x DYCI - Part No: 55.253

Rotor Arm: 2 x 1/8" NPTF - 2w2 Rotor Arm 18.5" - Part No: 82.946

HP Nozzles: 2 x HP Nozzle 1/8" - Part No: 1503, 1 x #3 Self Recovery Nozzle

HP Gun: 2 x HP Gun - Part No: 29.081

Caster: 4 x Stainless Steel Caster 4" Ø - Part No: 80.956

Optional Extras:

Nozzle Package: 2 x 1502 Nozzles + 1 x #2 Nozzle, Part No: 78.983

Specs

Pressure: 5000 psi

Temperature: 250°F

Thread In: 3/8" NPTF

Thread Out (for nozzles): 1/8" NPTF

Diameter: 21"

Weight: 44lbs

The Mosmatic HP Nozzle Size 045 is built for high-performance, high-pressure cleaning in the toughest environments. Constructed from premium hardened stainless steel, this nozzle offers outstanding durability, corrosion resistance, and reliable spray precision. Rated for a maximum pressure of 5000 PSI, the Mosmatic HP Nozzle Size 045 is available with 1/8" and 1/4" NPT Male connections. The 1/8" NPTM version is available in 0°, 15°, 25°, and 40° spray angles, while the 1/4" NPTM version offers a 15° spray angle, making it versatile for a wide range of cleaning applications. Ideal for industrial, commercial, and automotive uses, this nozzle ensures consistent, high-impact cleaning performance.

**See charts for more details on pressure, flow rate, and pump capacity.

Applications

• Industrial and commercial pressure washing

• Heavy-duty equipment cleaning

• Automotive and truck wash systems

• Surface preparation and degreasing

• Agricultural equipment and machinery maintenance

Features

• Hardened stainless steel construction for superior durability

• Withstands pressures up to 5000 PSI

• Available in 1/8" and 1/4" NPT Male thread options

• Spray angles: 0°, 15°, 25°, and 40° for 1/8" NPTM; 15° for 1/4" NPTM

• High resistance to wear, corrosion, and harsh chemicals

• Optimized for efficient, precision-directed spray performance

Specs 

Material Type: Stainless Steel

Size: 045 

Thread In: 1/8" NPTM or 1/4" NPTM

Pressure: 5000 psi (at 1 nozzle, see chart for more details)