SkyVac®

This is the complete replacement for the blow port assembly on a SkyVac Mighty Atom.

Items included in this purchase are the full assembly including the front plate, back plate, and screws. 

Compatible with the 1.75" (44mm) SkyVac® Suction Poles, the set contains two angled carbon fiber tool holders for easy access in hard to reach locations, such as overhead beams. It's complimented by a variety of brush options, ideal for large areas and tight crevices. The perfect high-reach cleaning set.

These brushes are an essential part of your kit for high level internal cleaning jobs. They are designed to reach the small corner, tight spaces, and hard to reach areas to provide an effective clean.

Two carbon fiber tool holders are included to hold your end tools at the ideal angle for cleaning difficult to reach places. The brushes are designed for different tasks one might encounter such as radiator dusting, flat surface cleaning, and general every day cleaning jobs.

The Soft Round Brush is perfect for many daily tasks, and can easily clean those smaller spaces. The Pivot Black Large Brush is for cleaning at all angles, making your cleaning more customizable. The Straight White Large Brush is ideal for narrow spaces, such as in between bars or beams.

Key Features:

• Compatible with 1.75" (44mm) SkyVac® Push Fit Suction Poles
• Designed for handling a range of daily high level, internal cleaning tasks
• Complete with two tool holders at 65° and 155°

Included Items

• 155° Carbon Fiber Tool Holder
• 65° Carbon Fiber Tool Holder
• Small Round Brush - Outer Diameter 3"
• Crevice tool
• Pivot Black Brush - Bristles are 5" Length, 2" Width in the middle and tapers down on each end to create a diamond shape. Also Pivots to a 90° Angle
• Straight White Brush

Specifications

• Diameter: 1.75" (44mm)
• Material: carbon fiber tool holders

SkyVac® offers a wide variety of end attachments for gutter cleaning. Here you can order single individual attachments and accessories.

This is the white bristled, elongated finger brush that tapers up to a point.

You can also buy this as an Internal Brush Set.

One of three molded casings that are used to construct the 2 motor 78 vac head. This is the top casing. The replacement handle sits on top and is sold separately.

Internal Vacuuming crevice tool. Two pieces. Includes crevice tool and detachable crevice brush.

One of three molded casings that are used to construct the 2 motor 78 vac head.

If you have any question about which parts you need for your SkyVac® please contact us.

The SkyVac® FloodVac is a cutting-edge flood water extraction and restoration system engineered for professionals in flood recovery, water damage repair, and disaster restoration. Designed to handle the toughest flood cleanup tasks, this dual-pump powerhouse delivers exceptional performance for both residential and commercial applications.

The FloodVac’s advanced dual-pump technology combines a high-capacity submersible pump (extracting up to 500 LPM from depths of 5 m / 16 ft) with an internal vacuum pump delivering an additional 180 LPM. Together, they remove up to 95% of floodwater, leaving surfaces clean and dry.

Powered by a 4.3 kW (5.8 HP) Honda engine, the FloodVac ensures reliable, fuel-efficient operation with reduced noise and vibration. Mounted on a durable steel trolley with all-terrain braking wheels, it offers superior mobility and rapid deployment in any environment.

For added convenience, every unit includes the SkyVac® Floor Tool Kit with a 38 mm industrial hose, long tool holder, and three interchangeable brush heads—ideal for removing standing water from flat surfaces.

Applications:

• Industrial & Commercial Water Extraction

• Flood Cleanup & Restoration

• Emergency & Disaster Recovery

Key Features:

• Dual-pump system for deep and surface water removal

• Extracts from depths up to 5 m (16 ft)

• 500 LPM submersible + 180 LPM internal vacuum pump

• Powerful 4.3 kW Honda engine with low fuel use

• Quiet, low-vibration operation meeting environmental standards

• Fully mobile steel frame with all-terrain wheels

• Includes complete SkyVac® Floor Tool Kit

The SkyVac® FloodVac—Professional power, performance, and reliability for fast, effective flood recovery.

Video

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

 Included

• 4 x All-terrain wheels with brakes
• 1 x 4.3kW engine
• 1 x Flat hose (25m)
• 1 x 38mm hose (8m)
• 1 x Drain hose
• 1 x skyVac wet and dry tool kit
• Easy fit connectors
• 1 x submersible pump and basket

Floor Tool Kit

• 50mm Drum -38mm Hose Cuff
• 38mm Diameter Flexi Hose x 3 Meters
• 2 x aluminum/plastic tubes
• 1 x plastic bend end tool holder
• 1 x wet floor brush (40.5cm) 
• 1 x dry floor brush (40.5cm)
• 1 x carpet floor brush (40.5cm)

Specifications

Motor Wattage - 1.9 horsepower (HP) / 1400 W (max)

Engine Power - 5.8 HP

Water Lift - 100 inches

Air Flow Movement - 148 CFM / 4200 L/min

Container Capacity - 20.6 gallons / 78 liters

Weight (with pump) - 288.8 lbs / 131 kg

Weight (without pump) - 233.7 lbs / 106 kg

Decibel Level - 107 dB

Dimensions (with basket) - 51.2" L × 51.2" W × 24.4" H / 130 × 130 × 62 cm

Dimensions (without basket) - 39.4" L × 51.2" W × 24.4" H / 100 × 130 × 62 cm

Floor Tool Kit

• 50mm Drum -38mm Hose Cuff
• 38mm Diameter Flexi Hose x 3 Meters
• 2 x aluminum/plastic tubes
• 1 x plastic bend end tool holder
• 1 x wet floor brush (40.5cm) 
• 1 x dry floor brush (40.5cm)
• 1 x carpet floor brush (40.5cm)

SkyVac Floor Tool Kit:

• Brush Head Width:  405mm
• Brush Head Opening Diameter: 44mm
• Hose:  38mm Diameter Flexi Hose x 3 Meters
• Inlet Cuff:  50mm Drum - 38mm Hose 

External Pump:

• 12.2m max head
• 17.7 CFM / 500 LPM max flow
• 230 Volt 1.5 kW electric motor
• Auto stop/start float switch
• AISI 304 & cast iron construction
• 50mm max suspended solids
• 5m max immersion
• Oil bath motor & seals
• Class F insulation, IP68
• For dirty water up to 50°C
• 2" BSSPF outlet
• 10m power cable

Internal Pump:

• Flow rate up to 180 l/min (10.8 m3/h)
• Picks up solids up to 25mm
• Suction down to zero above ground level 
• Continuous vacuum

The pumps are complete with:

• Power Cable
• Float Switch

Fits SkyVac® Push Fit Poles

This tool holder is designed for a Class II Division II Combustible Dust environment. It push fits into the end pole at top and is tapered on one end to suit your choice of cleaning tools and brushes.

Included Items

1 x SkyVac®️ 65° ATEX Carbon Fiber End Tool Holder

The SkyVac 78 Vacuum Only unit is a high-capacity, industrial-grade wet and dry vacuum designed for demanding commercial interior cleaning. This listing includes the vacuum, canister, and integrated cart only. No hoses, poles, tools, cuffs, or accessories are included.

Built for power and durability, the SkyVac 78 features dual motors, a tilting stainless steel canister, and a rugged steel chassis that supports reliable performance in warehouses, factories, schools, churches, theaters, hotels, airports, and retail facilities. Its large-capacity container and washable filter make it a dependable choice for facilities that require consistent, heavy-duty debris collection.

The SkyVac 78 uses a 20-amp plug, which provides more power than a standard household 15-amp outlet. Most commercial buildings have 20-amp outlets, and in homes they are usually found in kitchens or bathrooms. If a 20-amp outlet is not available, a 20-amp-to-15-amp adapter can be used to run one motor, or an extension cord can be used to reach a 20-amp outlet.

If you are looking for the complete SkyVac® 78 System, visit the SkyVac®️ 78 Industrial Dry High Ceiling Cleaning product page.

Key Features

• Dual Industrial Motors - Two high-performance vacuum motors deliver strong suction for efficient wet or dry debris removal.
• Stainless Steel Tilting Canister - Durable construction with an easy-empty design suited for constant commercial use.
• Washable Wet and Dry Cartridge Filter  -Long-lasting, reusable filter located under the head for simple removal and cleaning.
• Heavy Gauge Steel Chassis - All-terrain frame engineered for mobility and stability in industrial environments.
• Locking Front Castors - Keeps the vacuum stable during operation.
• Optional Disposable Dust Bag Compatibility - Supports large-capacity dust bags for streamlined maintenance.

Applications

• Warehouse and industrial interior cleaning
• Commercial high dust collection (vacuum unit only, without reach tools)

Video

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Demo

Included

• Quantity 1: Vacuum Head (2 motor)
• Quantity 1: Cartridge Filter
• Quantity 1: Cart
• Quantity 1: Drum

Specs

• Airflow: 253 CFM
• Motor Wattage: 2200 W total (2 motors)
• Noise Level: 72 dB
• Container Capacity: approx. 20 gallons (78 liters)
• Power: 120 V, 20 A
• Dimensions: 24 in L x 25.5 in W x 45 in H
• Weight: approx. 80 lbs (36 kg)
• Power Cable: approx. 26 ft (8 m)

Manuals

SkyVac® 78 Internal High Dusting Vacuum System Manual

SkyVac® offers a wide variety of end attachments for gutter cleaning. Here you can order single individual attachments and accessories.

Round brush specifically for Mighty Atom Push Fit. 

Reach new heights safely with the SkyVac® SkyScraper® 30ft Telescopic Pole, designed for high-level moss removal from the safety of the ground or platform. Weighing just 2kg, this lightweight carbon fiber hybrid pole offers exceptional strength and control, minimizing fatigue during extended use.

Compatible with the SkyScraper® Head & Blade system, Wire Roof Brush, and Speedi Brushes, it delivers a complete, efficient solution for roof cleaning. Simply attach your chosen head, extend the pole to the desired height, and lock it in place with secure clamps.

When finished, the pole collapses compactly for easy transport and storage. Ideal for professionals seeking a safe, durable, and efficient ladder-free cleaning solution.

Disclaimer:

Clean Direct / SkyVac® high-reach poles are not designed or certified for use in combustible dust environments. Use of this equipment in such conditions may result in serious injury, property damage, or other hazards.

Please note that carbon fiber poles are electrically conductive. Operators should exercise extreme caution when using this product around any electrical source, including overhead power lines, outlets, equipment, or during outdoor use in storms or wet conditions.

The operator assumes all risks associated with using this product outside its intended purpose and operating guidelines.

Specs

Telescopic Pole 30ft:

• Height: 30ft
• Collapsed Height: 5.8ft
• Weight: 2kg
• Material: Carbon Fibre Hybrid

The SkyVac® Telescopic Carry Bag is a long blue logo bag for carrying SkyVac®️ telescopic poles. Side pockets with zippers hold cleaning attachments.

Included Items

1 x SkyVac® Carry Bag for Accessories and Poles

Replacement basket with clips for SkyVac®  30

• Basket and Clips
• Clips Only