SkyVac®

SkyVac®️ Wet & Dry Floor Kit

A handy addition for your SkyVac® Vacuum, the floor tool kit can tackle dirt, debris, spills and standing water across a range of hard surfaces as well as giving those carpets a deep clean.

The set comprises of three 16in (40.5cm) heads (water pick up / hard floor/ carpet), 6 ft 7in (2M) of 1.5in (38mm) hose along with an easy store handle. The 2in (50mm) Inlet cuff is compatible with all SkyVac® wet and dry gutter vacuums.

Ideal for floor vacuuming projects, the floor tool kit comes with three 1ft 4in (40.5cm) brush heads to tackle spills, dust and debris. 

• Water Pick Up Head: Quickly remove standing water from hard surfaces, ideal for spills and clearing up standing water. A great way to clear excess water from pressure washer projects, especially on those projects with poor drainage. Sucking up the standing water clears the dirt and debris quickly, getting the job done faster with less mess
• Hard Floor Head: Ideal for garage floors, tiled floors, concrete floors - or any hard surface in need of dirt and dust pick up
• Carpet Floor Brush: With bristled bars to rake the dirt and debris from the carpet pile

Simply Plug into your SkyVac® suction port and vacuum.

Supplied with a 2in (50mm) drum cuff which is ONLY compatible with the SkyVac® Mighty Atom, Commercial, Industrial 85 and Interceptor.

Simply insert the drum cuff with 9 ft 10in (3m) Hose into the suction port, attach to the floor handle and select the right floor end tool for the project.

Included

• 2in (50mm) Drum to 1.5in (38mm) Hose Cuff
• 1.5in (38mm) Diameter Flexi Hose at 9ft 10in
• Inlet Side Cuff for Fitting the Tools
• 2 x Aluminium/Plastic Tubes
• Plastic Bent End
• Dry Floor Brush
• Wet Floor Brush
• Carpet Floor Brush

Specifications

• Brush Head Width: 1ft 4in (405mm)
• Brush Head Opening Diameter: 1.75in (44mm)
• Hose: 1.5in (38mm) Diameter Flexi Hose x 9ft 10in (3m)
• Inlet Cuff: 2in (50mm) Drum - 1.5in (38mm) Hose

A replacement drum can be purchased for your SkyVac® Sonic, 85, 78, or Interceptor.

Please choose from the drop down menu.

• SkyVac® Sonic drum's chassis includes wheel and drain hose
• SkyVac® 78 drum's chassis intake is centered specifically to hold large dust bags for internal cleaning.
• SkyVac® 85 drum's chassis has an off-centered, cyclonic style intake to create airflow vortex. It's available in two styles:
• Standard Drum
• Drum with Drainage Hose
• SkyVac® Interceptor drum is slightly larger than the SkyVac 85 and off-centered to create an airflow vortex

Please note: Full unit pictured; however, this price is for the stainless steel drum only. Vacuum and carts sold separately.

A brand new tool, ideal for accessing hard to reach valley gutters when working at a height. This tool enables you to use the SkyVac Elite End tools at a straight angle.

For ultimate control and maneuverability. 

The Tool Holder accesses hard to reach valley gutters working at valley gutter height. 

How do you use it?

To use, simply connect the Straight Tool Holder to Elite Poles then attach desired tool in the other end. 

Included Items

1 x 

SkyVac® Elite Straight Tool Holder

(Elite pole and end tools sold separately)

Specifications:

Compatible with the Elite Carbon fiber Poles and Elite End tools (sold separately)

Dimensions: Approx 13.5 inches (345mm) Length

One Size Fits All

Adjustable snap in back

SkyVac® ATEX rated anti-static end tool. This attachment is used for pipes and available in two sizes.

• Large Size 4" (100mm)
• Small Size 8" (200mm)

Please choose from drop the down menu.

This tool is designed for a Class II Division II Combustible Dust environment. It push fits into the tapered tool holder at the top of your SkyVac® Pole Set.

Included Items

1 x ATEX Half Round Brush

Front Inlet to SkyVac®️ 85 or SkyVac Interceptor

Transform your existing vacuum into a powerful high-level cleaning system with the SkyVac® Elevate Clamped Poles. Designed for professional internal cleaning, these lightweight, carbon-fiber hybrid poles offer precision, control, and stability for safe, effective cleaning up to 40 ft high—without the need for ladders or scaffolding.

Perfect for removing dust from air-conditioning ducts, ceiling beams, vents, and other hard-to-reach areas, the Elevate poles deliver speed and efficiency with every use. The secure clamping mechanism locks each pole in place, ensuring a firm connection for confident cleaning performance.

Each pole weighs just 330 g, offering exceptional maneuverability and reducing fatigue during long projects. Setup takes seconds—build to your required height quickly for a smooth start to every job.

Compatible with the SkyVac Internal 27, 30, 78, and 150 systems, this versatile package includes angled tool holders (65° and 155°) and a range of cleaning brushes for tackling diverse internal environments.

Key Features:

• Premium clamped pole system for enhanced control and stability

• Strong yet ultra-light carbon-fiber construction

• Reaches up to 40 ft for safe high-level internal cleaning

• Quick setup and secure clamping for professional results

• Compatible with multiple SkyVac Internal models

• Includes accessories for comprehensive dust-removal tasks

• These Elevate Poles are the perfect upgrade to your push-fit poles. 

Disclaimer:
Clean Direct / SkyVac® high-reach poles are not designed or certified for use in combustible dust environments. Use of this equipment in such conditions may result in serious injury, property damage, or other hazards. Please note that carbon fiber poles are electrically conductive. Operators should exercise extreme caution when using this product around any electrical source, including overhead power lines, outlets, equipment, or during outdoor use in storms or wet conditions.

The operator assumes all risks associated with using this product outside its intended purpose and operating guidelines.

33.051

Video

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included 

Full set comes with the following:

• 1 x Soft Round Brush
• 1 x Large White Straight Brush
• 1 x Radiator Brush
• 1 x Small Half Round Vac Brush
• 1 x Small Flexi Brush
• 1 x Hose Cuff
• 1 x SkyVac Branded Carry Bag for Poles and Accessories

OR One individual elevate pole with no other items.

Specs

Individual pole

• Length: 5ft (1.5m)
• Diameter: 1.73" (44mm)
• Weight: 11.6oz (330g)
• Material: Hybrid Carbon Fiber

Enhance your gutter cleaning performance with the Hybrid Clamped Pole Set with Hose, Neck & End Tools.
Made from a carbon fiber and fiberglass hybrid, these poles combine lightweight durability and rigidity, giving you excellent control at maximum height with minimal effort.

The clamped system allows quick assembly and secure connection for projects up to four stories high. Easily reach over garages, conservatories, and porches to remove debris and stubborn blockages with precision.

Featuring SkyVac® innovations such as the Elite Vac Release Cuff for instant suction control and the Anti-Block Hairpin Neck for smoother airflow and fewer clogs, this pole system ensures efficient, uninterrupted cleaning.

Each 44mm pole weighs only 330g, offering enhanced stability and maneuverability even in challenging conditions. Compatible with the SkyVac® Mighty Atom, SkyVac® Sonic Atom, and most gutter vacuums, this hybrid clamped pole set delivers safe, reliable, and time-saving gutter cleaning every time.

Unique SkyVac® innovation, for less downtime, and more productive up-time! 

Disclaimer:

Clean Direct / SkyVac® high-reach poles are not designed or certified for use in combustible dust environments. Use of this equipment in such conditions may result in serious injury, property damage, or other hazards.

Please note that carbon fiber poles are electrically conductive. Operators should exercise extreme caution when using this product around any electrical source, including overhead power lines, outlets, equipment, or during outdoor use in storms or wet conditions.

The operator assumes all risks associated with using this product outside its intended purpose and operating guidelines.

SkyVac® Hairpin Neck Tool Holder: European Community Design Registration Number 008458913
SkyVac® Elite Vac Release Pole. Patent PENDING: Application No: GB1713830.6

Included 

SkyVac® NEW Clamped Carbon Fiber Suction Pole Set: 

• Clamped carbon fiber / fiber glass hybrid suction poles. 
  • Quantity will vary dependent on pole package chosen.
• SkyVac® Elite Vac Release Pole (x 1)
• SkyVac® Elite Hairpin Neck 135 Degree tool holder
• 25 feet of Vacuum Hose (50mm diameter)
• 2 x Cuffs:  2 inch Vac to 2 inch hose cuff/  2 inch hose to 2 inch pole cuff

Tools & Accessories: 

• Crevice end tool for accessing gutters in tight gaps
• Aluminum Tapered end tool for accessing small gaps
  
• Daily end tool for general gutter clearing
• Aluminum Long end tool for greater reach for hard to access gutters and downpipes
• Dual Tool: Scalloped End Tool & Aluminum dirt breaker combination
• SkyVac® Pole and accessory carrying bag

OR One individual clamped pole with no other items.

Specifications

SkyVac® Clamped Pole Specifications: 

• Carbon Fiber / Fiber Glass Hybrid
• Weight: 12 oz
• Length: 5 Feet
• Diameter: 2 inches

SkyVac® Elite Vac Release Pole: 

• Carbon Fiber
• Weight: 10 oz
• Length: 5 Feet
• Diameter: 2 inches

SkyVac® Hairpin Neck Tool Holder: 

• Carbon Fiber
• Approximately 12 x 10 x 2 inches 

The SkyVac® Dual End Tool is a 2-in-1 gutter cleaning end tool which gives you a standard end tool and a specialist end tool all in one! This multi-purpose tool is a no brainer, why carry multiple tools when you can have one tool that does it all? 

Time is money when you are on the job. Spend less time rummaging through your equipment and use one tool that serves multiple purposes, allowing you to be more productive and get the job done quicker!

Use the standard dirt breaker to make your way through gutters daily, the slanted end is ideal for breaking down tough gutter growths into smaller chunks; however, for the jobs that require a bit more of a fight, the scalloped end tool is going to be your best friend. Utilize the curved sides to slice and chop through the more dense or frozen turf as well as benefiting from the improved air flow thanks to the unique design which allows air to enter from both sides.

1) The standard dirt breaker will serve your everyday gutter cleaning needs, the slanted aluminum end efficiently breaks through dirt and turf making for an easy removal. 

2) The scalloped aluminum end tool helps tackle the more stubborn turf. The shaped edges and narrow tip allow better suction power to circulate around the gutter and allows debris to be removed more swiftly and stops the tool end from sticking to the base of the gutter. But that’s not all! The shaped edges allow you to slice through tougher gutter debris and breakthrough down pipe blockages. 

Video

Included Items

1 x Elite Dual End Tool

Specifications

• 11.5 inches Long (297mm)
• 1.7 inches Diameter (44mm)
• Material: Aluminum
• Compatible with Elite tool holders

“Is there anything that I can use to get moss at the edge of a roof tile?”

YES!  Our NEW Skyscraper® wire roof cleaning brush is exactly what you need.  The carbon steel bristles get right in the tile edges and overhangs, giving that stubborn moss build off, the brush off.  For thorough results, and getting moss out of those nooks and crannies, this brush is a must. 

The Skyscraper® Wire Brush can be attached to a telescopic pole using the angled connector (provided). It can also be attached to the SkyVac® Elite Poles using the SkyVac® Elite Multi Connector.

How do I clean the roof tiles?

To clean roof tiles, we recommend the Skyscraper® Head and Blades - which has a choice of 11 blade profiles to match the shape of your roof tile project AND includes the brush.

Attach the Skyscraper® Head and Blades, or the Wire Roof Cleaning brush to a telescopic pole to access your roof cleaning project.

Where is the roof brush useful?
The stiff wire bristles mean you can access areas that can’t be thoroughly cleaned with the bladed system – such as edges, joins and overlaps.

1) Ridge Tile: A common site of moss build up.

2) Roof Gable or Rake / Drip Edge of Dormer windows: Crumbs can form on the tiles at the outer edge of the roofs or Dormer windows.

3) Valley Gutter Edging: Prone to moss build up as rain runs into the gutter.

4) Around the Chimney and the flashing.

Video

This video shows the SkyScraper Tool. The Wire Brush in this listing works similarly as it attaches to your Elite Poles or Telescoping Pole.

Included Items

• 1 x Wire Brush
• 1 x Angle Connector (Euro Thread) (if chosen)

Specifications

• (H)2in (L)7in (D)3in
• Weight: .6 lbs
• Carbon steel bristles 
• Soft grip polypropylene
• Brush head fits angle adaptor 

Replacement cap for the filter tree in a SkyVac®️ 85 or SkyVac 78®️

• Creates a sharp finish to paving edges (such as next to grass where precision cleaning is difficult)
• Robust tool but very lightweight and easy to maneuver
• Provides powerful precision cleaning

 Video

This video shows the 3 Nozzle Edge Cleaner. This listing is for the Single Nozzle Edge Cleaner but the video gives you the general idea of how it works in both cases: single or triple nozzle.

Included Items

1 x Single Nozzle Edge Cleaner

Note: The video shown is the 3 Nozzle Edge Cleaner

Does NOT include wand / lance / high pressure gun

Specifications

• Jets: 1 Nozzle
• Connection: 1/4" Quick Release Female Connector
• Maximum Pressure: 4010 psi

This is to purchase a replacement monitor for the SkyVac®️ recordable camera or live action (non recordable) camera.

*This does not include the camera head, accessories or bag.

Replacement Individual Poles for the Mighty Atom

Two Types:

• Push Fit (Traditional Atom or Mighty Atom Push)
• Clamped (Mighty Atom Clamped and Sonic Atom)

 Pole Comparison Chart:

Included Items

1 x Atom Pole of Your Choice

Specifications

• Length 5ft
• Diameter Clamped Poles: 2in (50mm)
• Diameter Push Fit Pole: 1.75in (44mm)