SkyVac®

This is the complete replacement for the blow port assembly on a SkyVac Mighty Atom.

Items included in this purchase are the full assembly including the front plate, back plate, and screws. 

Interceptor Base Plate

SkyVac® Industrial 85 Drum Upgrade Kit with Drain Hose & Sieve Basket

Separating gutter debris into solid & liquid matter, makes disposal quicker, easier, and smarter.

NEW drum with drain hose and removable sieve basket is the ideal upgrade for the SkyVac Industrial 85, dividing gutter debris as it enters the drum. The sieve basket catches the solid gutter debris, allowing the water to drain through into the base of the drum. Ideal for waterlogged projects!

Simply swap your existing Industrial 85 drum with the NEW upgraded kit and you are good to go.

Features & Benefits

Instead of a gutter soup, the sieve basket captures the solid gutter debris as it enters the vacuum, allowing the liquid to drain through into the base of the drum. The separated debris is easier and more convenient to dispose of. Liquid can be emptied via the drain hose directly into the drains, while the leaves and debris, captured in the sieve basket, can be tipped directly into a compost bin.

This is ideal for waterlogged projects, where clogged gutters have a build-up of standing water and saturated debris. Water can be quickly and easily emptied from the drum using the drain hose, a quick 2-minute job.

The Industrial 85 has a 16 gallon debris capacity when fully filled and could easily weigh up to 130 lbs. So, while the system has been designed to easily accommodate, maneuver, and safely tip out this weight of debris, being able to quickly and easily remove the liquid will really lighten the load.

Key Features

• Industrial 85 drum with drain hose, compatible with existing SkyVac Industrial 85 models.
• Drum has reinforced cyclonic side entry and a 16 gallon debris capacity.
• Drain hose with clips, mounted on the front of the drum for ease of access.
• Slightly raised drainage point and internal filter to reduce blockages caused by fine silt or sediment.
• Drain hose features an attached air tight cap.
• Removable sieve basket can be easily lifted in and out of the drum using the side handles and the contents tipped into a compostable bin.
• Separated gutter debris is much easier and faster to dispose of.

Please note: This listing is for the Industrial 85 Upgrade kit. Drum with drain hose and sieve basket only. Complete skyVac Industrial 85 system shown for demonstration purposes only.

The 24 Ft Telescopic Pressure Washing Lance is designed for high level cleaning safely from the ground - no need for ladders or high access equipment. Simply attach it to a pressure washer (available separately) and clean up to three stories high (24ft).

There is no need for ladders or high access equipment with this telescopic lance, simply attach to your existing pressure washer to clean up to three stories high (24ft).

This lance comes complete with a full set of 5 Variable Nozzles for customizing your water pattern and cleaning. This lance is great for high level cleaning on areas such as gutters, fascias, soffits, UPVA, cladding, and more.

Key Features:

• High level cleaning from the safety of the ground
• Complete with 5 variable nozzles for customizable cleaning
• Connect to your pressure washer for powerful high reach cleaning
• It comes complete with a full set of 5 variable, interchangeable nozzles and safety belt.

Included Items

1 x 24ft Telescopic Lance

Specifications

• Inlet: 3/8" QC Plug
• Outlet: 1⁄4" QC Coupler
• Maximum Pressure: 4000 psi (275 bar)
• Maximum Delivery Rate: 8 gpm (30 lpm)
• Maximum Temperature: 212° F (100°C)
• Package Dimensions: 86in x 10in x 5in
• Weight: 20lbs (9kg)

Maximize the performance of your high-reach vacuum with the SkyVac Swivel Cuff. This professional hose-to-pole connector delivers smooth 360° rotation to stop kinks and tangles, maintain uninterrupted airflow, and keep you cleaning efficiently—especially at height. Built for tough, daily use, it offers quick, reliable coupling between your vacuum hose and poles.

Applications

• Commercial & residential gutter cleaning

• High-level vacuuming in hard-to-reach areas

• Professional exterior and interior cleaning

Key Features

• 360° swivel action: Prevents hose twists and snags for smoother workflow

• Seamless operation: Consistent suction and faster job completion

• Durable build: Engineered for demanding, professional use

Sizes & Compatibility

• 50–44mm Swivel Cuff: Compatible with SkyVac Elevate Interior Dusting Poles

• 50–50mm Swivel Cuff: Compatible with SkyVac Elite and Hybrid Gutter Cleaning Poles
  

Upgrade your setup with the SkyVac Swivel Cuff for tangle-free operation and consistently powerful, high-reach cleaning.

Replacement Interceptor Drum Head Complete

Interceptor Turbine Parts

• Impeller Set - Diffuser Set
• Pulley
• Taper Bush 1610 W/ Grub Screw (goes with pulley)
• Shaft
• ATEX Diffuser Spacer
• ATEX Diffuser ASSY YP (Set of 4)
• Hose Clip
• Hose Elbow Taper 51mm
• ST/ST Plate with Bend
• Adaptor

Interceptor Full Turbine Assembly (Turbine only)

For turbine parts, visit our turbine parts page.

The SkyVac® Pine Needle Removal Tool is designed to break up and clear stubborn, compacted pine needles that can clog gutter systems and reduce vacuum efficiency. Attached to the SkyVac® Flexi Neck Reducer Tool, the tool quickly agitates dense needle clusters so they can be easily cleared using your vacuum’s blow function. This simple add-on boosts system performance, speeds up cleaning time, and helps prevent gutter blockages caused by resinous pine debris.

Key Features
• Breaks down clumped or compacted pine needles for easier removal
• Attaches directly to the SkyVac® Flexi Neck Reducer Tool
• Optimized for use with SkyVac® gutter vacuum blow function
• Improves airflow and overall vacuum performance
• Lightweight, durable design for regular professional use
• Ideal for properties surrounded by pine trees or heavy needle fall

Applications
• Gutter maintenance on residential and commercial buildings
• Clearing stubborn pine needles from gutters and downspouts
• Enhancing efficiency of SkyVac® gutter vacuum systems
• Professional exterior cleaning and maintenance services

Replacement Parts for Top Casing of Mighty Atom

• Black Topper (disc that sits on top)
• Black Head Casing (only)

Looking for the top handle? Please check out our handles.

Looking for the blow port? Please check out the blow port.

Introducing the all new SkySweeper and Hybrid SkySweeper!

Choose between 100% steel bristles or a hybrid mix of steel and polypropylene bristles, for the ultimate roof cleaning experience.

KEY FEATURES:

• Long lasting bristles.
• Extra wide, for easy coverage.
• Made of tough material, for a thorough clean.

How do you use it?

Simply attach the SkySweeper / Hybrid SkySweeper to your SkyScraper Head and away you go!

What is the SkySweeper compatible with?

This product will fit onto our SkyScraper Head, to be used in conjunction with our telescopic poles.

Please note the SkyScraper Head is sold separately, and can be purchased here: SkyScraper® Head & Blades

Drain Hose Assembly for SkyVac® Interceptor, SkyVac® 85, or SkyVac® Sonic Atom.

The SkyVac® 85 and Sonic use the same style. The SkyVac® Interceptor has a larger drum so the assembly is longer and designed slightly different.

Compatible with the 1.75" (44mm) SkyVac® Suction Poles, the set contains two angled carbon fiber tool holders for easy access in hard to reach locations, such as overhead beams. It's complimented by a variety of brush options, ideal for large areas and tight crevices. The perfect high-reach cleaning set.

These brushes are an essential part of your kit for high level internal cleaning jobs. They are designed to reach the small corner, tight spaces, and hard to reach areas to provide an effective clean.

Two carbon fiber tool holders are included to hold your end tools at the ideal angle for cleaning difficult to reach places. The brushes are designed for different tasks one might encounter such as radiator dusting, flat surface cleaning, and general every day cleaning jobs.

The Soft Round Brush is perfect for many daily tasks, and can easily clean those smaller spaces. The Pivot Black Large Brush is for cleaning at all angles, making your cleaning more customizable. The Straight White Large Brush is ideal for narrow spaces, such as in between bars or beams.

Key Features:

• Compatible with 1.75" (44mm) SkyVac® Push Fit Suction Poles
• Designed for handling a range of daily high level, internal cleaning tasks
• Complete with two tool holders at 65° and 155°

Included Items

• 155° Carbon Fiber Tool Holder
• 65° Carbon Fiber Tool Holder
• Small Round Brush - Outer Diameter 3"
• Crevice tool
• Pivot Black Brush - Bristles are 5" Length, 2" Width in the middle and tapers down on each end to create a diamond shape. Also Pivots to a 90° Angle
• Straight White Brush

Specifications

• Diameter: 1.75" (44mm)
• Material: carbon fiber tool holders

SkyVac® offers a wide variety of end attachments for gutter cleaning. Here you can order single individual attachments and accessories.

This is the white bristled, elongated finger brush that tapers up to a point.

You can also buy this as an Internal Brush Set.