Vacuum Accessories

Transform your existing vacuum into a powerful high-level cleaning system with the SkyVac® Elevate Clamped Poles. Designed for professional internal cleaning, these lightweight, carbon-fiber hybrid poles offer precision, control, and stability for safe, effective cleaning up to 40 ft high—without the need for ladders or scaffolding.

Perfect for removing dust from air-conditioning ducts, ceiling beams, vents, and other hard-to-reach areas, the Elevate poles deliver speed and efficiency with every use. The secure clamping mechanism locks each pole in place, ensuring a firm connection for confident cleaning performance.

Each pole weighs just 330 g, offering exceptional maneuverability and reducing fatigue during long projects. Setup takes seconds—build to your required height quickly for a smooth start to every job.

Compatible with the SkyVac Internal 27, 30, 78, and 150 systems, this versatile package includes angled tool holders (65° and 155°) and a range of cleaning brushes for tackling diverse internal environments.

Key Features:

• Premium clamped pole system for enhanced control and stability

• Strong yet ultra-light carbon-fiber construction

• Reaches up to 40 ft for safe high-level internal cleaning

• Quick setup and secure clamping for professional results

• Compatible with multiple SkyVac Internal models

• Includes accessories for comprehensive dust-removal tasks

• These Elevate Poles are the perfect upgrade to your push-fit poles. 

Disclaimer:
Clean Direct / SkyVac® high-reach poles are not designed or certified for use in combustible dust environments. Use of this equipment in such conditions may result in serious injury, property damage, or other hazards. Please note that carbon fiber poles are electrically conductive. Operators should exercise extreme caution when using this product around any electrical source, including overhead power lines, outlets, equipment, or during outdoor use in storms or wet conditions.

The operator assumes all risks associated with using this product outside its intended purpose and operating guidelines.

33.051

Video

Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.

Included 

Full set comes with the following:

• 1 x Soft Round Brush
• 1 x Large White Straight Brush
• 1 x Radiator Brush
• 1 x Small Half Round Vac Brush
• 1 x Small Flexi Brush
• 1 x Hose Cuff
• 1 x SkyVac Branded Carry Bag for Poles and Accessories

OR One individual elevate pole with no other items.

Specs

Individual pole

• Length: 5ft (1.5m)
• Diameter: 1.73" (44mm)
• Weight: 11.6oz (330g)
• Material: Hybrid Carbon Fiber

Outperform with Mytee’s vinyl Cuff-Lynx™

Vinyl Cuff-Lynx™ don’t crack under pressure. Made out of high-quality vinyl, these flexible hose cuffs will outlast standard hard plastic hose cuffs.

Part #H135V, 2″ Vinyl Cuff-Lynx™ Male Starter

Features:

• Durable vinyl material resists breaks and splits
• Ultra low-profile design saves storage space on hose reels
• Reduces suction loss
• Fits standard hoses

Instructions for Use:

To prevent hoses from unscrewing from Cuff-Lynx™, it is advised to add a small amount GOOP® All Purpose Adhesive and Sealant to the vacuum hose threads. Available at most hardware stores. Not sold by Mytee®.

Shipping weight
1 lb.

Shipping dimensions
4" x 4" x 4"

Keep a low-profile with Mytee’s new vinyl Cuff-Lynx™

Vinyl Cuff-Lynx™ don’t crack under pressure. Made out of high-quality vinyl, these flexible hose cuffs will outlast standard hard plastic hose cuffs.These vinyl cuffs have an ultra-low profile and swivel technology to reduce hose twists and kinks.

1.5″ Female Cuff-Lynx™ x 1.5″ Female Vacuum Hose.

Features:

• Durable vinyl material resists breaks and splits
• Swivel technology reduces hose twisting & kinks
• Ultra low-profile design saves storage space on hose reels
• Reduces suction loss
• Fits standard hoses
• Connects to Part #H176V to create coupler set

Instructions for Use:
To prevent hoses from unscrewing from Cuff-Lynx™, it is advised to add a small amount GOOP® All Purpose Adhesive and Sealant to the vacuum hose threads. Available at most hardware stores. Not sold by Mytee®.

Shipping weight
1 lb.

Shipping dimensions
7" x 5" x 5"

Keep a low-profile with Mytee’s new vinyl Cuff-Lynx™

Vinyl Cuff-Lynx™ don’t crack under pressure. Made out of high-quality vinyl, these flexible hose cuffs will outlast standard hard plastic hose cuffs. These vinyl cuffs have an ultra-low profile and swivel technology to reduce hose twists and kinks.

1.5″ Male Cuff-Lynx™ x 1.5″ Female Vacuum Hose.

Features:

• Durable vinyl material resists breaks and splits
• Swivel technology reduces hose twisting & kinks
• Ultra low-profile design saves storage space on hose reels
• Reduces suction loss
• Fits standard hoses
• Connects to Part #H118V to create coupler set

Instructions for Use:
To prevent hoses from unscrewing from Cuff-Lynx™, it is advised to add a small amount GOOP® All Purpose Adhesive and Sealant to the vacuum hose threads. Available at most hardware stores. Not sold by Mytee®.

Shipping weight
1 lb.

Shipping dimensions
7" x 5" x 5"

*previously H176V

Keep a low-profile with Mytee’s new vinyl Cuff-Lynx™

Vinyl Cuff-Lynx™ don’t crack under pressure. Made out of high-quality vinyl, these flexible hose cuffs will outlast standard hard plastic hose cuffs.These vinyl cuffs have an ultra-low profile and swivel technology to reduce hose twists and kinks.

2″ Male Cuff-Lynx™ x 2″ Female Vacuum Hose.

Features:

• Durable vinyl material resists breaks and splits
• Swivel technology reduces hose twisting & kinks
• Ultra low-profile design saves storage space on hose reels
• Reduces suction loss
• Fits standard hoses
• Connects to Part #H110V to create coupler set

Instructions for Use:
To prevent hoses from unscrewing from Cuff-Lynx™, it is advised to add a small amount GOOP® All Purpose Adhesive and Sealant to the vacuum hose threads. Available at most hardware stores. Not sold by Mytee®.

Shipping weight
1 lb.

Shipping dimensions
7" x 5" x 5"

SkyVac®️ Wet & Dry Floor Kit

A handy addition for your SkyVac® Vacuum, the floor tool kit can tackle dirt, debris, spills and standing water across a range of hard surfaces as well as giving those carpets a deep clean.

The set comprises of three 16in (40.5cm) heads (water pick up / hard floor/ carpet), 6 ft 7in (2M) of 1.5in (38mm) hose along with an easy store handle. The 2in (50mm) Inlet cuff is compatible with all SkyVac® wet and dry gutter vacuums.

Ideal for floor vacuuming projects, the floor tool kit comes with three 1ft 4in (40.5cm) brush heads to tackle spills, dust and debris. 

• Water Pick Up Head: Quickly remove standing water from hard surfaces, ideal for spills and clearing up standing water. A great way to clear excess water from pressure washer projects, especially on those projects with poor drainage. Sucking up the standing water clears the dirt and debris quickly, getting the job done faster with less mess
• Hard Floor Head: Ideal for garage floors, tiled floors, concrete floors - or any hard surface in need of dirt and dust pick up
• Carpet Floor Brush: With bristled bars to rake the dirt and debris from the carpet pile

Simply Plug into your SkyVac® suction port and vacuum.

Supplied with a 2in (50mm) drum cuff which is ONLY compatible with the SkyVac® Mighty Atom, Commercial, Industrial 85 and Interceptor.

Simply insert the drum cuff with 9 ft 10in (3m) Hose into the suction port, attach to the floor handle and select the right floor end tool for the project.

Included

• 2in (50mm) Drum to 1.5in (38mm) Hose Cuff
• 1.5in (38mm) Diameter Flexi Hose at 9ft 10in
• Inlet Side Cuff for Fitting the Tools
• 2 x Aluminium/Plastic Tubes
• Plastic Bent End
• Dry Floor Brush
• Wet Floor Brush
• Carpet Floor Brush

Specifications

• Brush Head Width: 1ft 4in (405mm)
• Brush Head Opening Diameter: 1.75in (44mm)
• Hose: 1.5in (38mm) Diameter Flexi Hose x 9ft 10in (3m)
• Inlet Cuff: 2in (50mm) Drum - 1.5in (38mm) Hose

Keep a low-profile with Mytee’s new vinyl Cuff-Lynx™

Vinyl Cuff-Lynx™ don’t crack under pressure. Made out of high-quality vinyl, these flexible hose cuffs will outlast standard hard plastic hose cuffs.These vinyl cuffs have an ultra-low profile and swivel technology to reduce hose twists and kinks.

2″ Female Cuff-Lynx™ x 2″ Female Vacuum Hose.

Features:

• Durable vinyl material resists breaks and splits
• Swivel technology reduces hose twisting & kinks
• Ultra low-profile design saves storage space on hose reels
• Reduces suction loss
• Fits standard hoses
• Connects to Part #H136V to create coupler set

Instructions for Use:
To prevent hoses from unscrewing from Cuff-Lynx™, it is advised to add a small amount GOOP® All Purpose Adhesive and Sealant to the vacuum hose threads. Available at most hardware stores. Not sold by Mytee®.

Shipping weight
1 lb.

Shipping dimensions
7" x 5" x 5"

SkyVac® ATEX rated anti-static end tool. This attachment is used for pipes and available in two sizes.

• Large Size 4" (100mm)
• Small Size 8" (200mm)

Please choose from drop the down menu.

This tool is designed for a Class II Division II Combustible Dust environment. It push fits into the tapered tool holder at the top of your SkyVac® Pole Set.

Included Items

1 x ATEX Half Round Brush

Keep a low-profile with Mytee’s new vinyl Cuff-Lynx™

Vinyl Cuff-Lynx™ don’t crack under pressure. Made out of high-quality vinyl, these flexible hose cuffs will outlast standard hard plastic hose cuffs.These vinyl cuffs have an ultra-low profile and swivel technology to reduce hose twists and kinks.

Part #H141V, 2″ to 1.5″ Vinyl Cuff-Lynx™ Reducer

Features:

• Durable vinyl material resists breaks and splits
• Swivel technology reduces hose twisting & kinks
• Ultra low-profile design saves storage space on hose reels
• Reduces suction loss
• Fits standard hoses

Instructions for Use:
To prevent hoses from unscrewing from Cuff-Lynx™, it is advised to add a small amount GOOP® All Purpose Adhesive and Sealant to the vacuum hose threads. Available at most hardware stores. Not sold by Mytee®.

Shipping weight
1 lb.

Shipping dimensions
4" x 4" x 4"

Keep a low-profile with Mytee’s new vinyl Cuff-Lynx™

Vinyl Cuff-Lynx™ don’t crack under pressure. Made out of high-quality vinyl, these flexible hose cuffs will outlast standard hard plastic hose cuffs.These vinyl cuffs have an ultra-low profile and swivel technology to reduce hose twists and kinks.

1.5″ Female Cuff-Lynx™ x 1.5″ Female Vacuum Hose.

Features:

• Durable vinyl material resists breaks and splits
• Swivel technology reduces hose twisting & kinks
• Ultra low-profile design saves storage space on hose reels
• Reduces suction loss
• Fits standard hoses
• Connects to any 1.5" male Vinyl Cuff-Lynx™️

Instructions for Use:
To prevent hoses from unscrewing from Cuff-Lynx™, it is advised to add a small amount GOOP® All Purpose Adhesive and Sealant to the vacuum hose threads. Available at most hardware stores. Not sold by Mytee®.

Shipping weight
1 lb.

Shipping dimensions
7" x 5" x 5"

This Universal Connector allows you to use SkyVac® Internal Tools and Brushes with your existing 1.75in (44mm) SkyVac® Suction Poles.

It gives you much more versatility with your machine and enables you to tackle internal high level cleaning as well as external.

Key Features:

• Compatible with the SkyVac® Atom
• Use with our SkyVac® Suction Poles 1.75in (44mm) diameter
• Allows for versatility in your high level cleaning

Included Items

1 x Universal Connector

Specifications

• 4in (100mm) Long
• 1.75in (44mm) Diameter

SkyVac®️ Replacement Filter Housing Kit for the 30, 78, 85, 150 & Interceptor 

We recommend changing your filter once or twice a year, depending on usage, to keep your machine in its best condition.

It filters out the finer dust and dirt particles to protect the inside of your machine and keeping it running efficiently.

Key Benefits:

• Compatible with the SkyVac® Internal 78, 30, 150, Industrial 85, and Interceptor
• Protects the inside of your machine from finer dust particles
• Keeps your SkyVac® running smoothly

Included Items

1 x Cartridge Filter Housing Kit

Specifications

Compatible with the SkyVac®️ 30, 78, 85, 150 & Interceptor

SkyVac®️ offers a wide variety of end attachments for gutter cleaning. This Elite crevice end tool is designed to fit into a tight space where shingles partially obstruct the gutter.

It's thin enough to fit in between overhanging roof tiles and gutters. Aluminum at the base and plastic at the tip, this tool is compatible with the SkyVac® Elite pole system via the rigid neck attachment.

• 1.5in (38mm) Fitment Diameter
• Overhead Cleaning
• Antistatic
• Rubber, Plastic, Galvanized Steel, Stainless Steel Construction
• Black Bristles & Rubber Lip

This brush is available in 12in size.

PLEASE NOTE: This brush is Exp rated for Class II, Division II Combustible Dust Environments.

*Pole shown for demonstration purposes and is not included

Video

Included Items

1 x EXP Rated Flat Wall Brush

Specifications

• Dimensions: 12in (300mm)
• Weight: 1lb 2oz (0.50kg)

Compatible with the SkyVac® Atom Push Fit Poles.

For greater results when removing heavy soiling in gutters.

• Super lightweight strong carbon fiber construction - no heavy metal parts
• Interchangeable tool holder
• Extra wide entry point
• Is compatible to existing 1.75" (44mm) SkyVac Push Fit suction poles
• Comes complete with 5 ft suction pole, rigid neck and metal dirt breaker tool

Video

Included Items

• 1 x SkyVac® Tapered End Suction Pole 2in (50mm) top end / 1.75in (44mm) base end Diameter
• 1 x SkyVac® Elite Hairpin 135° Rigid Neck Tool Holder*
• 1 x SkyVac® Dual Tool (Elite Dirt Breaker End Tool & Scalloped Aluminum End Tool combination)

*European Community Design Registration Number 008458913