Products
Sort by:
The Mosmatic DGE Swivel - 34.785 is a durable stainless steel swivel engineered for high-pressure environments requiring precise management of thrust and radial forces. Featuring a reliable bearing system with 1x thrust ball bearing and 2x sliding bearings, this swivel ensures smooth operation under continuous use. Designed for a max pressure of 2900 PSI and temperature resistance up to 250°F, it is the ideal solution for pharmaceutical, food processing, industrial, and automatic car wash applications.
Applications:
-
Food and beverage production and sanitation systems
-
Pharmaceutical clean-in-place (CIP) and processing lines
-
Industrial washdown and chemical distribution
-
Rotary spray arms in automatic car washes
Key Features:
-
Heavy-duty stainless steel construction for corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Engineered to handle both thrust and radial loads
-
High-flow performance designed for low-RPM applications
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTF
-
Nominal Width (NW): 1"
-
Diameter: 2.35"
-
Overall Length: 4.65"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTF
Nominal Width (NW): 1"
Wrench Size (SW1): 1.42
Diameter 1 (D1): 2.35"
Diameter 2 (D2): 2.83
Length 1 (L1) (overall length): 4.65"
Length 2 (L2): 2.52
Length 4 (L4): 1.18
Length 5 (L5): 1.14
Weight: 74.3oz
The Mosmatic DGE Swivel - 34.786 is a high-performance stainless steel swivel engineered for high-pressure applications that demand reliable management of thrust and radial forces. Equipped with a reliable bearing system—including 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, consistent operation even in the most demanding conditions. With a pressure rating of 2900 PSI and temperature resistance up to 250°F, it is an ideal choice for pharmaceutical, food processing, industrial cleaning, and automatic car wash systems.
Applications:
-
Food and beverage sanitation and processing systems
-
Pharmaceutical clean-in-place (CIP) applications
-
Industrial washdown and fluid transfer
-
Rotary spray systems in automatic car washes
Key Features:
-
Durable stainless steel construction for maximum corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Supports high-flow, low-RPM, high-pressure applications
-
Designed to handle both thrust and radial loads efficiently
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTF
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.76"
-
Overall Length: 5.37"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTF
Nominal Width (NW): 1 1/4"
Wrench Size (SW1): 1.97
Diameter 1 (D1): 2.76"
Diameter 2 (D2): 3.07
Length 1 (L1) (overall length): 5.37"
Length 2 (L2): 2.84
Length 4 (L4): 1.18
Length 5 (L5): 1.30
Weight: 94.7oz
The Mosmatic DGE Swivel - 34.787 is a robust stainless steel swivel engineered for high-pressure and high-flow systems that must reliably manage thrust and radial forces. Designed with a durable bearing system—featuring 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, long-lasting performance under continuous use. Rated for 2900 PSI and capable of withstanding temperatures up to 250°F, it is perfect for demanding pharmaceutical, food processing, industrial cleaning, and automatic car wash applications.
Applications:
-
Food and beverage production and sanitation lines
-
Pharmaceutical clean-in-place (CIP) systems
-
Industrial fluid handling and high-pressure washdowns
-
Rotary spray arms and booms in automatic car washes
Key Features:
-
Corrosion-resistant stainless steel construction
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Supports both thrust and radial loads with high stability
-
High-flow performance designed for low-RPM, high-pressure use
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTF
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.33"
-
Overall Length: 5.87"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTF
Nominal Width (NW): 1 1/2"
Wrench Size (SW1): 2.13
Diameter 1 (D1): 3.33"
Diameter 2 (D2): 3.98
Length 1 (L1) (overall length): 5.87"
Length 2 (L2): 3.17
Length 4 (L4): 1.66
Length 5 (L5): 1.42
Weight: 181.5oz
The Mosmatic DGG Swivel 33.051 is a premium brass, nickel-plated swivel designed for high-pressure cleaning applications that demand consistent rotation and durability. With a robust construction and triple bearing system, this swivel ensures smooth, maintenance-free operation in self-rotating equipment, parts washers, and tire cleaning systems.
Engineered for maximum precision, this swivel includes a durable O-ring NBR seal system (optional: EPDM or FKM) for optimal sealing under pressure and rotation. Its compact size, corrosion-resistant finish, and ability to perform at high RPMs make it ideal for integration into commercial or industrial cleaning setups.
Applications:
-
High-pressure cleaning technology
-
Parts and component washers
-
Tire and undercarriage cleaners
-
Self-rotating spray systems
-
Industrial and OEM equipment
Key Features:
-
Material: Brass, nickel-plated for corrosion resistance
-
Seal System: O-ring NBR (optional: EPDM or FKM)
-
Bearing Design: Triple bearing system (2x radial, 1x thrust)
-
Mounting: Bulkhead style for secure installation
-
Thread IN: 1/4" NPTF
-
Thread OUT: 1/4" NPTM
-
Overall Diameter: 1.34”
-
Overall Length: 2.71”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
-
Performance: High-precision, maintenance-free operation
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4” NPTF
Thread Out: G2 1/4” NPTM
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.67"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.71"
Length 2 (L2): 0.43"
Weight: 8.5 oz
The Mosmatic DGG Swivel 33.052 is a high-performance brass, nickel-plated swivel designed for self-rotating, high-pressure cleaning applications. Ideal for use in tire cleaners, parts washers, and surface cleaners, this swivel ensures long-lasting precision and efficiency.
Equipped with a triple bearing system—including two radial ball bearings and one thrust ball bearing—the 33.052 delivers smooth rotation under high pressure. The O-ring NBR seal system provides a reliable seal, with optional EPDM or FKM materials available for specialized needs. Its corrosion-resistant construction and bulkhead fitting make it a top-tier, maintenance-free solution for industrial cleaning setups.
Applications:
-
High-pressure cleaning systems
-
Self-rotating cleaning equipment
-
Parts washers
-
Tire and underbody cleaners
-
Industrial degreasing stations
Key Features:
-
Material: Brass, nickel plated
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearing Design: Triple bearing (2x radial, 1x thrust)
-
Thread IN (G1): 1/4” NPTF
-
Thread OUT (G2): 1/4” NPTF
-
Overall Diameter: 1.34”
-
Overall Length: 2.75”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature:
-
90°F at 1000 RPM
-
250°F at 30 RPM
-
-
Mounting: Bulkhead fitting
-
Maintenance: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4” NPTF
Thread Out: G2 1/4” NPTF
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.75"
Weight: 7.4 oz
The Mosmatic DGG Swivel 33.053 is a premium brass, nickel-plated swivel designed for high-pressure cleaning systems and self-rotating applications. Its triple bearing design (2x radial, 1x thrust) ensures optimal rotation and extended performance in demanding environments.
Featuring an O-ring NBR seal system (with optional EPDM or FKM upgrades), this swivel is built to resist corrosion and withstand high temperatures and pressure. With a bulkhead-style mounting, it’s easy to integrate into tire cleaners, parts washers, and other industrial cleaning setups.
Applications:
-
Self-rotating high-pressure cleaning systems
-
Tire and wheel washers
-
Industrial parts cleaning equipment
-
Stationary or automated wash systems
-
Spray arms and nozzle assemblies
Key Features:
-
Material: Brass, nickel plated for corrosion resistance
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearings: Triple bearing system (2x radial, 1x thrust)
-
Mounting: Bulkhead design for secure installation
-
Thread IN: 1/4" NPTF
-
Thread OUT: 3/8" NPTM
-
Overall Diameter: 1.34”
-
Overall Length: 2.75”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
-
Performance: Maintenance-free, high-precision operation
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4” NPTF
Thread Out: G2 3/8” NPTM
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.75"
Length 2 (L2): 0.47"
Weight: 7.4 oz
The Mosmatic DGG Swivel 33.054 is a premium brass, nickel-plated swivel engineered for high-pressure cleaning and self-rotating applications. Built with durability and precision in mind, this swivel is ideal for equipment such as parts washers, tire cleaners, and surface cleaners.
Featuring a triple bearing system—2x radial ball bearings and 1x thrust ball bearing—the 33.054 ensures smooth, reliable rotation under demanding conditions. Its O-ring NBR seal system provides secure sealing, with optional upgrades to EPDM or FKM for enhanced chemical resistance. Designed with a bulkhead mounting configuration, this swivel delivers maintenance-free operation and long-lasting performance in corrosive environments.
Applications
-
High-pressure cleaning systems
-
Self-rotating surface cleaners
-
Tire and undercarriage washers
-
Industrial parts cleaning
-
Automated wash systems
Key Features
-
Material: Brass, nickel plated
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearing System: Triple bearing (2x radial, 1x thrust)
-
Thread IN (G1): 1/4” NPTF
-
Thread OUT (G2): 3/8” NPTF
-
Overall Diameter: 1.34”
-
Overall Length: 2.87”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature:
-
90°F at 1000 RPM
-
250°F at 30 RPM
-
-
Mounting Type: Bulkhead fitting
-
Maintenance: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4” NPTF
Thread Out: G2 3/8” NPTF
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.87"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.87"
Weight: 8.5 oz
The Mosmatic DGG Swivel 33.063 is a high-performance brass, nickel-plated swivel engineered for high-pressure cleaning applications and self-rotating equipment. With a triple bearing system (2x radial and 1x thrust bearing), this swivel ensures smooth, low-resistance rotation and long-lasting performance.
It features a durable O-ring NBR seal system, with optional EPDM or FKM seal materials available for varied environmental compatibility. The bulkhead mount design allows secure integration into tire washers, parts cleaners, or other automated systems.
Applications:
-
Self-rotating cleaning heads
-
Tire and wheel cleaning systems
-
High-pressure parts washers
-
Stationary and mobile wash equipment
-
Rotating spray arm assemblies
Key Features:
-
Material: Brass, nickel-plated for durability and corrosion resistance
-
Seal System: O-ring NBR (optional EPDM or FKM for added chemical resistance)
-
Bearings: Triple bearing configuration (2x radial, 1x thrust)
-
Mounting: Bulkhead design for secure installation
-
Thread IN: 1/4" NPTF
-
Thread OUT: G3/8" M
-
Overall Diameter: 1.34”
-
Overall Length: 2.59”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Maximum Pressure: 4000 PSI
-
Maximum RPM: 1000
-
Maximum Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
-
Maintenance: Maintenance-free, high-precision operation
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4” NPTF
Thread Out: G2 G3/8” M
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.59"
Length 2 (L2): 0.39"
Weight: 8.7 oz
The Mosmatic DGG Swivel 33.151 is a premium nickel-plated brass swivel engineered for high-pressure and self-rotating cleaning systems. Designed for durability and precision, this swivel incorporates a triple bearing system—including two radial ball bearings and one thrust bearing—to ensure optimal performance and reliability.
Its O-ring NBR sealing system (also available in EPDM or FKM) provides flexibility for varied applications and fluid compatibility. With a corrosion-resistant design and maintenance-free construction, the DGG 33.151 is built to meet the rigorous demands of commercial and industrial cleaning systems.
Applications:
-
High-pressure self-rotating cleaning systems
-
Undercarriage and tire washers
-
Industrial parts washers
-
Car wash and fleet wash systems
-
Factory and equipment cleaning
Key Features:
-
Material: Brass, nickel plated
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearings: Triple system – 2x radial, 1x thrust
-
Mounting: Bulkhead fitting
-
Thread IN (G1): 3/8” NPTF
-
Thread OUT (G2): 1/4” NPTM
-
Overall Diameter: 1.34”
-
Overall Length: 2.55”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature: 90°F at 1000 RPM; 250°F at 30 RPM
-
Maintenance: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8” NPTF
Thread Out: G2 1/4” NPTM
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.67"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.55"
Length 2 (L2): 0.43"
Weight: 7.4 oz
The Mosmatic DGG Swivel 33.152 is a precision-engineered brass, nickel-plated swivel built for demanding high-pressure cleaning and self-rotating applications. This swivel is ideal for use in tire cleaners, industrial parts washers, and automated cleaning equipment.
Its advanced triple bearing system—featuring two radial ball bearings and one thrust ball bearing—ensures smooth, reliable rotation even under continuous high pressure. The O-ring NBR sealing system offers dependable leak resistance and can be optionally configured with EPDM or FKM seals for chemical compatibility. Corrosion-resistant and maintenance-free, this swivel is designed for long-lasting performance in tough environments.
Applications
-
High-pressure cleaning systems
-
Parts washers
-
Self-rotating cleaning heads
-
Tire and underbody wash systems
-
Industrial automated cleaning equipment
Key Features
-
Material: Brass, nickel plated
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearing System: Triple bearing (2x radial, 1x thrust)
-
Thread IN (G1): 3/8” NPTF
-
Thread OUT (G2): 1/4” NPTF
-
Overall Diameter: 1.34”
-
Overall Length: 2.75”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature:
-
90°F at 1000 RPM
-
250°F at 30 RPM
-
-
Mounting Type: Bulkhead fitting
-
Maintenance: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8” NPTF
Thread Out: G2 1/4” NPTF
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.75"
Weight: 8.7 oz
The Mosmatic DGG Swivel 33.153 is a high-precision, nickel-plated brass swivel designed for self-rotating, high-pressure cleaning systems. Built for performance and longevity, it features a triple bearing system—two radial ball bearings and one thrust bearing—for smooth, consistent operation in demanding environments.
This swivel includes an O-ring NBR seal system with optional upgrades to EPDM or FKM for specialized chemical resistance. The corrosion-resistant design, bulkhead mounting, and maintenance-free operation make it ideal for industrial cleaning setups.
Applications:
-
High-pressure cleaning systems
-
Parts washers
-
Self-rotating cleaning heads
-
Tire and undercarriage cleaners
-
Automated car wash system
Key Features:
-
Material: Brass, nickel plated
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearings: Triple system (2x radial, 1x thrust)
-
Thread IN (G1): 3/8” NPTF
-
Thread OUT (G2): 3/8” NPTM
-
Overall Diameter: 1.34”
-
Overall Length: 2.59”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature: 90°F at 1000 RPM / 250°F at 30 RPM
-
Mounting: Bulkhead fitting
-
Maintenance: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8” NPTF
Thread Out: G2 1/4” NPTM
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.59"
Length 2 (L2): 0.47"
Weight: 8.5 oz
The Mosmatic DGG Swivel 33.154 is a durable, high-performance brass swivel engineered for high-pressure and self-rotating cleaning applications. Ideal for parts washers, tire cleaners, and industrial wash systems, this swivel ensures reliable performance with minimal maintenance.
It features a triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth and consistent rotation. The integrated O-ring NBR seal system offers secure sealing and is optionally available with EPDM or FKM materials for enhanced chemical resistance. The nickel-plated finish provides corrosion resistance, and the bulkhead design allows for easy mounting and long-term use in harsh environments.
Applications
-
High-pressure cleaning systems
-
Parts washing machines
-
Self-rotating cleaning heads
-
Tire and undercarriage washers
-
Industrial wash bays and equipment
Key Features
-
Material: Brass, nickel plated
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearing System: Triple bearing (2x radial, 1x thrust)
-
Thread IN (G1): 3/8” NPTF
-
Thread OUT (G2): 3/8” NPTF
-
Overall Diameter: 1.34”
-
Overall Length: 2.87”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature:
-
90°F at 1000 RPM
-
250°F at 30 RPM
-
-
Mounting: Bulkhead fitting
-
Maintenance: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8” NPTF
Thread Out: G2 3/8” NPTF
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.87"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.87"
Weight: 8.8 oz
The Mosmatic DGG Swivel 33.163 is a high-quality, nickel-plated brass swivel engineered for demanding high-pressure and self-rotating cleaning applications. Designed with precision and durability in mind, it features a triple bearing system (2x radial ball bearings and 1x thrust bearing) for optimized rotational performance and longevity.
This swivel includes a reliable O-ring NBR seal system, with optional upgrades to EPDM or FKM seals for enhanced chemical resistance. Built to be corrosion-resistant and maintenance-free, the DGG 33.163 is ideal for both stationary and rotating systems.
Applications:
-
High-pressure cleaning equipment
-
Self-rotating surface cleaners
-
Parts washers
-
Tire and underbody cleaning systems
-
Industrial wash systems
Key Features:
-
Material: Brass, nickel plated
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearings: Triple system – 2x radial, 1x thrust
-
Thread IN (G1): 3/8” NPTF
-
Thread OUT (G2): G3/8” M
-
Overall Diameter: 1.34”
-
Overall Length: 2.59”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature:
-
90°F at 1000 RPM
-
250°F at 30 RPM
-
-
Mounting: Bulkhead fitting
-
Operation: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8” NPTF
Thread Out: G2 G3/8” M
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.59"
Length 2 (L2): 0.39"
Weight: 8.4 oz
The Mosmatic DGG Swivel 33.351 (90 Degrees) is a high-precision, brass, nickel-plated swivel designed for high-pressure, self-rotating cleaning applications. Built to perform in demanding environments like tire washers, parts cleaning systems, and industrial surface cleaners, this swivel ensures longevity and efficiency.
Featuring a compact 90-degree angle design, it includes a triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth, reliable operation. The swivel is sealed with a dependable O-ring NBR system, with optional upgrades to EPDM or FKM for chemical resistance. Designed for corrosion resistance, easy bulkhead mounting, and maintenance-free use, the 33.351 delivers long-term durability and exceptional precision.
Applications
-
High-pressure rotating cleaning systems
-
Tire and underbody cleaning equipment
-
Parts washers and degreasers
-
Industrial wash stations
-
Surface cleaners and sprayers
Key Features
-
Design: 90° angled swivel
-
Material: Brass, nickel plated
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearing Type: Triple bearing (2x radial, 1x thrust)
-
Thread IN (G1): 1/4” NPTF
-
Thread OUT (G2): 1/4” NPTM
-
Overall Diameter: 1.34”
-
Overall Length: 2.71”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature:
-
90°F at 1000 RPM
-
250°F at 30 RPM
-
-
Mounting Style: Bulkhead
-
Maintenance: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8” NPTF
Thread Out: G2 1/4” NPTM
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.67"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.71"
Length 2 (L2): 0.43"
Weight: 7.8 oz
The Mosmatic DGG Swivel 33.353 (90 Degrees) is a brass, nickel-plated swivel designed for high-pressure, self-rotating cleaning applications. With a durable 90° configuration, it’s perfect for systems requiring compact, directional rotation such as tire cleaners, parts washers, and industrial surface cleaners.
This high-performance swivel features a triple bearing system—2x radial ball bearings and 1x thrust ball bearing—for optimal rotation under pressure. The O-ring NBR seal system ensures leak-free performance, and can be optionally upgraded to EPDM or FKM seals for increased chemical compatibility. Built for corrosion resistance, bulkhead mounting, and maintenance-free operation, the DGG 33.353 ensures reliability in even the harshest cleaning environments.
Applications
-
High-pressure rotating cleaning systems
-
Parts washing equipment
-
Tire and undercarriage cleaning systems
-
Industrial surface cleaners
-
Self-rotating cleaning heads
Key Features
-
Design: 90° angled swivel
-
Material: Brass, nickel plated
-
Seal Type: O-ring NBR (optional EPDM or FKM)
-
Bearing System: Triple bearing (2x radial, 1x thrust)
-
Thread IN (G1): 1/4” NPTF
-
Thread OUT (G2): 3/8” NPTM
-
Overall Diameter: 1.34”
-
Overall Length: 2.75”
-
Nominal Width (NW): 1/4”
-
Wrench Size (SW): 0.87”
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature:
-
90°F at 1000 RPM
-
250°F at 30 RPM
-
-
Mounting Type: Bulkhead fitting
-
Maintenance: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4” NPTF
Thread Out: G2 3/8” NPTM
Nominal Width (NW): 1/4”
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.75"
Length 2 (L2): 0.47"
Weight: 8.5 oz
Showing 60/316
Cleaning News
Cleaning News
Cleaning News