Products
Sort by:
Used to connect hose to the inside of the Ionic Systems hose reel.
Size 1/4" BSPT
Used with the following Ionic Systems products:
- Portage Hose Reels
- Mountable Steel Hose Reel
- Stainless Steel Hose Reel with Wheels (Small or Large)
Metal Hose Reel, Coated Black Finish
Hose is shown for demonstration purposes and is not included wit this purchase. You can add the RX Hose and RXHADA Quick Connector to complete your setup. Don't forget your O'Clips. You'll need at least 4 of them.
This reel ships unassembled in a box.
Ionic Systems QR Female Fitting to RX Adaptor
Female brass quick-release fitting and adaptor smaller diameter hoses (such as Ionic RX hose)
Used to connect your water fed line to the Hose Reel with Wheels and other uses.
RAPIDO™ ELECTRIC HOSE REEL
The Rapido™ Reel can hold up to 328 ft (100m) of 3/8" RX hose, which can be quickly and effortlessly reeled, and is housed in a sleekly designed encasement; however, as a best practice we typically use 262 ft (80m) which allows the reel to retract the hose faster and keep it coiled up neatly.
Rapido™ has the assistance of a belt driven motor. The battery powered, low torque, high speed motor allows the hose to be reeled onto the spindle at rapid speed, allowing operatives a time and effort-saving benefit over manual reeling.
The Rapido™ Reel is constructed from high quality stainless steel and shares the unrivaled spindle drum design of our tried and tested quality hose reel range. It has a 10 year warranty on the stainless parts. With a sleek plastic cover to protect the motor from water ingress, Rapido™ boasts 180 degree hose guide rollers, and is powered by the system’s own battery. Ionic’s "quality without compromise" design ethos is applied to Rapido™ throughout, and it’s built to last, meaning you can expect many years of trouble free operation.
The Rapido™ reel has as a standard stop/start push button operation. (Note: front controller box version no longer offered)
The unique design allows for the detachable reel to be fitted and secured to the floor of a vehicle or a portable trolley, or stacked on top of each other, maximizing space saving.
Rapido Assembly includes RX hose and connectors.
Video
Included Items
x1 Rapido Hose Reel
Rapido Assembly:
- Rapido Hose Reel
-
One section of RX Hose: 328 ft (100M) Hose, 8mm internal diameter.
- RXHADA connector
PLEASE NOTE: The system is no longer offered with a front controller as shown in this video. All units are supplied with an electric push button.
Specifications
- 19"L x 13.5"W x 19"H
- Weight 41 lbs (without hose)
Rapido Electric Hose Reel Replacement Motor
Three different hose reels to choose from!
Stainless Steel Hose Reel with Wheels
Superb quality non-rusting stainless steel hose reel with wheels for ease of transportation. This hose reel is built to last and will stand up to even the most punishing of work schedules!
Holds approximately 100m-200m of Ionic RX Hose (or any 8mm hose) or 50m-100m of standard 1/2 inch hose. Comes with a hose tail on the inside to connect one stretch of hose (to wind up).
In order to connect your water fed pole line to the water output you'll also need to purchase separately an RX Hose Adapter (3/8" Hose to 1/2"inch fitting (RXHADA).
The inside width (where the hose wraps around in-between the walls) is 9 inches. The width from outer wheel (nut) to outer wheel (nut) is approximately 19 inches. and the handle extends out past that approximately another 4.5 inches. The height is 34.5 inches.
Select Type:
- Reel only
- Assembled with 100m of Ionic RX Hose (blue)
- Assembled with 50m of ½ inch Aquaflex Hose (yellow)
Stainless Steel Hose Reel with Wheels - Hand Carriable
Smaller, hand Carriable, quality small stainless steel hose reel. Holds 50m of ½ inch hose or 100m of Ionic RX Hose.
Select Type:
- Reel only
- Assembled with 100m of Ionic RX Hose (blue)
- Assembled with 50m of ½ inch Aquaflex Hose (yellow)
Mountable Steel Hose Reel
Mountable, quality small stainless steel hose reel. Holds 50m of ½ inch hose or 100m of Ionic RX Hose.
*Variation with double stacking cannot be bought online and it will be available upon request.
*Reel only
Enhance your window cleaning operations with the Ionic Systems Twin Hose Reel Splitter. Designed for efficiency and flexibility, this durable splitter allows two operators to work simultaneously from a single water source. Built with high-quality materials for lasting performance, it ensures smooth, uninterrupted flow and maximizes productivity on the job. Ideal for professional window cleaners seeking to improve workflow and reduce downtime, the Twin Hose Reel Splitter is easy to install and seamlessly integrates with Ionic Systems hose reels.
Hose Reel Module with 100' Hose that mounts to Hydro Cart Tap, Electric, Battery or Gas
This purchase is for the hose and reel only (not cart). Additional picture shown mounted to Hydro Cart which is sold separately.
The Mosmatic DGE Swivel - 34.852 is a compact, high-pressure swivel engineered for use in industrial and food service environments. Designed to handle both thrust and radial forces, it features a durable nickel-plated brass housing with a stainless steel interior for enhanced corrosion resistance and long-term reliability. The swivel includes a 1x thrust ball bearing, ensuring dependable performance. Rated for up to 4000 PSI and temperatures up to 250°F, this swivel is ideal for demanding fluid handling applications.
Applications:
-
Industrial high-pressure fluid systems
-
Food and beverage processing equipment
-
Cleaning and sanitation systems
-
Chemical and water transfer lines
Key Features:
-
Nickel-plated brass body with corrosion-resistant stainless steel interior
-
With 1x thrust ball bearing
-
Supports both thrust and radial force applications
-
High-flow, high-pressure design
-
Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTM
-
Nominal Width (NW): 3/8"
-
Diameter: 1.65"
-
Overall Length: 2.87"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 3/8"NPTM
Nominal Width (NW): 3/8"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 1.38
Diameter (D): 1.65"
Length 1 (L1) (overall length): 2.87"
Length 2 (L2): 2.05
Length 3 (L3): 0.43
Weight: 18.9oz
The Mosmatic DGE Swivel - 34.853 is a high-performance swivel engineered for high-pressure fluid systems in industrial and food service environments. Constructed from nickel-plated brass with a stainless steel interior, this swivel is designed to manage both thrust and radial forces with exceptional durability. It features a 1x thrust ball bearing, ensuring dependable performance. With high-flow capabilities and a corrosion-resistant design, this swivel is built to perform in tough applications involving heat, pressure, and demanding sanitation requirements.
Applications:
-
Industrial high-pressure fluid and cleaning systems
-
Food and beverage processing and sanitation equipment
-
Washdown stations and chemical delivery lines
-
High-flow, low-RPM rotary connections
Key Features:
-
Durable nickel-plated brass body with stainless steel interior
-
With 1x thrust ball bearing
-
Handles both thrust and radial loads
-
Optimized for high-flow and high-pressure environments
-
Corrosion-resistant for harsh or sanitary conditions
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTM
-
Nominal Width (NW): 1/2"
-
Diameter: 0.59"
-
Overall Length: 3.15"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTM
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 1.38
Diameter (D): 0.59"
Length 1 (L1) (overall length): 3.15"
Length 2 (L2): 2.17
Length 3 (L3): 0.59
Weight: 18.9oz
The Mosmatic DGE Swivel - 34.854 is a high-pressure, high-flow swivel designed for industrial and food service applications where both thrust and radial forces must be managed with precision. Constructed from nickel-plated brass with a stainless steel interior, this swivel offers excellent corrosion resistance and durability in demanding environments. The swivel includes a 1x thrust ball bearing, ensuring dependable performance, ideal for fluid transfer systems requiring strength, efficiency, and sanitation compliance.
Applications:
-
Industrial high-pressure fluid and washdown systems
-
Food and beverage processing equipment
-
Chemical handling and sanitation systems
-
Low-speed, high-pressure rotary unions
Key Features:
-
Nickel-plated brass body with stainless steel internal components
-
With 1x thrust ball bearing
-
Designed to withstand both thrust and radial forces
-
High-flow capacity with low maintenance requirements
-
Corrosion-resistant for industrial and sanitary use
-
Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM
-
Nominal Width (NW): 3/4"
-
Diameter: 1.97"
-
Overall Length: 3.46"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/4"NPTF
Thread Out: G2 3/4"NPTM
Nominal Width (NW): 3/4"
Wrench Size 1 (SW1): 1.06
Wrench Size 2 (SW2): 1.57
Diameter (D): 1.97"
Length 1 (L1) (overall length): 3.46"
Length 2 (L2): 2.38
Length 3 (L3): 0.63
Weight: 27.8oz
The Mosmatic DGE Swivel - 34.855 is a durable, high-performance swivel designed for use in high-pressure applications requiring both thrust and radial force support. Constructed from nickel-plated brass with a stainless steel interior, this swivel is corrosion-resistant and well-suited for industrial and food-grade environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, ensuring stable rotation, and consistent performance in demanding operations. With a pressure rating of up to 2900 PSI and temperature tolerance up to 250°F, this swivel offers a reliable solution for fluid transfer and cleaning systems.
Applications:
-
Industrial high-pressure cleaning systems
-
Food and beverage processing lines
-
Sanitary washdown and chemical delivery systems
-
High-flow, low-RPM rotary fluid connections
Key Features:
-
Nickel-plated brass construction with stainless steel interior
-
With 1x thrust ball bearing
-
Supports both thrust and radial force applications
-
Corrosion-resistant for long-term industrial or sanitary use
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTM
-
Nominal Width (NW): 1"
-
Diameter: 2.36"
-
Overall Length: 3.54"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTM
Nominal Width (NW): 1"
Wrench Size 1 (SW1): 1.42
Wrench Size 2 (SW2): 1.97
Diameter (D): 2.36"
Length 1 (L1) (overall length): 3.54"
Length 2 (L2): 2.36
Length 3 (L3): 0.71
Weight: 40.3oz
The Mosmatic DGE Swivel - 34.856 is a high-performance swivel designed to handle thrust and radial forces in high-pressure, high-flow applications. Made from nickel-plated brass with a stainless steel interior, this swivel is engineered for durability, corrosion resistance, and smooth performance in industrial and food service environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance and long service life. With a pressure capacity of up to 2900 PSI and a temperature limit of 250°F, this swivel is ideal for demanding fluid handling operations.
Applications:
-
High-pressure fluid and washdown systems
-
Food and beverage processing lines
-
Industrial sanitation and cleaning stations
-
Chemical and water transfer operations
Key Features:
-
Nickel-plated brass body with corrosion-resistant stainless steel internals
-
With 1x thrust ball bearing
-
Designed for both thrust and radial load support
-
High-flow capacity with reliable, low-RPM operation
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTM
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.36"
-
Overall Length: 4.17"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTM
Nominal Width (NW): 1 1/4"
Wrench Size 1 (SW1): 1.50
Wrench Size 2 (SW2): 1.81
Diameter (D): 2.36"
Length 1 (L1) (overall length): 4.17"
Length 2 (L2): 2.66
Length 3 (L3): 0.79
Weight: 2.36oz
The Mosmatic DGE Swivel - 34.857 is a heavy-duty, high-flow swivel designed for managing thrust and radial forces in high-pressure systems. Constructed with a nickel-plated brass body and a stainless steel interior, this swivel is corrosion resistant and built for durability in industrial and food service environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, and smooth, consistent operation. Capable of withstanding pressures up to 2900 PSI and temperatures up to 250°F, it is ideal for demanding cleaning and fluid transfer applications.
Applications:
-
High-pressure fluid transfer systems
-
Food and beverage processing and washdown lines
-
Industrial cleaning equipment
-
Chemical and sanitary fluid systems
Key Features:
-
Corrosion-resistant nickel-plated brass housing with stainless steel internals
-
With 1x thrust ball bearing
-
Handles both thrust and radial loads
-
High-flow design for low-RPM, high-pressure systems
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTM
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.35"
-
Overall Length: 4.41"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTM
Nominal Width (NW): 1 1/2"
Wrench Size 1 (SW1): 2.05
Wrench Size 2 (SW2): 2.76
Diameter (D): 3.35"
Length 1 (L1) (overall length): 4.41"
Length 2 (L2): 2.87
Length 3 (L3): 0.79
Weight: 95.3oz
Showing 15/132
Cleaning News
Cleaning News
Cleaning News