M6 X 16mm Button Head Screw SS

Mender Barb To Barb 5mm

NUT, M16 Nylock Nut

Please choose the style of O'Ring that you need for your Ionic product:

• O'Ring for a Tap Adaptor for QR Fittings - R0510
• O'Ring for a Salt Backwash Canister - W0053B
• O'Ring for a Stainless Steel Filter Housing - SFHJG or SRHJG
• O'Ring for a Plastic Filter Housing - IFHB or IROHB
• O'Ring for a QR Female Fitting & Adaptor for RX Hose - RXHADA
• O'Ring for a Sediment Filter Cartridge or Reverse Osmosis Membrane - IFSED or IFRO
• O'Ring for a Filter Housing 103.2mm x 5mm, Black Nitrile 70 Shore. OR01

Specs

Paddle Flow Switch for Quattro

GE 315 Paddle Flow Switch 1m cable

Plastic Packing Washer (WP20X40X4BLKorBLACK]

Pole Connector Cap

Ionic Systems Pressure Gauge (100psi)

0-100psi pressure gauge for cold pro-5 and pro-6 systems

Pressure gauge [panel fitting] [90456411F]

R 1500325 Screw Plug 19.5 German Thread

This is the replacement stem - quick connect - that is inserted at the bottom of the top segment on Hydra Water Fed Poles.

It has to be glued in to the pole.

All New Ionic Systems Hydra Water Fed Poles come standard with a quick connect fitting at the bottom of section one. This is where the fly lead connects and gets drawn up through the pole when you telescope upwards.

The legacy poles only had this feature for the Vertigo style pole.

This part is for the male Rectus connector / stem end that attaches at the base of the pole.

Choose the style you need depending on whether you have the new Hydra Water Fed Pole or the old Vertigo Style Pole as they are slightly different in design.

Red Fibre Washer [24 od x 13 id x 2mm]

Red, Orange, Green (one of each) ring stickers for Ionic ports