Car Wash
Car Wash Parts designed to keep your vehicle cleaning systems running smoothly, efficiently, and reliably. This collection includes essential replacement components and upgrade parts that help maintain optimal performance in both professional car wash setups and mobile detailing operations.
As an important segment of the broader Auto & Vehicle Cleaning Equipment category, these car wash parts support everything from routine maintenance to full system enhancements. With components built for durability and consistent water flow, you can keep your wash bays, pressure systems, and detailing tools operating at their best while minimizing downtime.
This collection is ideal for car wash operators, detailers, and mobile service professionals who want to extend equipment lifespan, prevent unexpected failures, and ensure high-quality cleaning results. Whether you’re replacing worn components or upgrading critical parts, these solutions help maintain reliability and enhance overall performance.
Use these car wash parts as part of a complete auto & vehicle cleaning workflow to keep your systems in top condition and deliver consistent, professional-grade service. With the right parts in place, you can improve efficiency, reduce maintenance interruptions, and provide superior cleaning results for every vehicle.
Sort by:
The Mosmatic DGE Swivel - 34.876 is a high-performance swivel designed for high-pressure applications requiring stable support for both thrust and radial forces. Constructed from nickel-plated brass with a stainless steel interior, it provides excellent corrosion resistance and is suitable for both industrial and food-grade environments. Including one thrust ball bearing, ensures smooth, controlled operation. With a 2900 PSI pressure rating and temperature resistance up to 250°F, this swivel delivers high-flow performance and long-term durability in demanding conditions.
Applications:
-
High-pressure industrial cleaning systems
-
Food and beverage processing and washdown lines
-
Chemical transfer and sanitary fluid systems
-
Low-RPM, high-volume fluid handling
Key Features:
-
Nickel-plated brass body with stainless steel internal components
-
With 1x thrust ball bearing
-
Designed for both thrust and radial force applications
-
Corrosion-resistant and high-flow design
-
Thread IN: G1 1 1/4" NPTF | Thread OUT: G2 1 1/4" NPTM
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.76"
-
Overall Length: 5.24"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTM
Nominal Width (NW): 1 1/4"
Wrench Size 1 (SW1): 1.50
Diameter (D1): 2.76"
Diameter 2 (D2): 3.07
Length 1 (L1) (overall length): 5.24"
Length 2 (L2): 2.62
Length 3 (L3): 0.79
Length 4 (L4): 1.18
Length 5 (L5): 1.10
Weight: 87.9oz
The Mosmatic DGE Swivel - 34.874 is a durable, high-pressure swivel engineered for demanding applications that require consistent support for both thrust and radial forces. Constructed from nickel-plated brass with a stainless steel interior, it is designed to withstand corrosion in industrial and food-grade environments. Featuring a 1x thrust ball bearing, ensuring dependable performance., this swivel ensures smooth rotation, and long-term reliability. Rated up to 4000 PSI and 250°F, it’s ideal for high-performance fluid transfer systems.
Applications:
-
High-pressure cleaning and washdown equipment
-
Food and beverage processing systems
-
Sanitary fluid handling and chemical transfer
-
Industrial hose reels and rotary connections
Key Features:
-
Nickel-plated brass body with stainless steel internal components
-
With 1x thrust ball bearing
-
Corrosion-resistant and suitable for sanitary use
-
Supports thrust and radial forces in low-RPM operations
-
Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM
-
Nominal Width (NW): 3/4"
-
Diameter: 1.96"
-
Overall Length: 4.37"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/4"NPTF
Thread Out: G2 3/4"NPTM
Nominal Width (NW): 3/4"
Wrench Size 1 (SW1): 1.06
Diameter (D1): 1.96"
Diameter 2 (D2): 1.96
Length 1 (L1) (overall length): 4.37"
Length 2 (L2): 2.40
Length 3 (L3): 0.63
Length 4 (L4): 0.75
Length 5 (L5): 0.87
Weight: 35.7oz
The Mosmatic DGE Swivel - 34.873 is a high-performance swivel designed to withstand thrust and radial forces in demanding high-pressure applications. Crafted from nickel-plated brass with a stainless steel interior, it offers excellent corrosion resistance and durability for both industrial and food-grade use. Including one thrust ball bearing, ensures smooth and stable operation in high-flow systems. With a 4000 PSI pressure rating and temperature resistance up to 250°F, this swivel is built for reliable performance in continuous-use environments.
Applications:
-
High-pressure cleaning and fluid handling systems
-
Food and beverage sanitation and processing lines
-
Chemical and washdown systems
-
Industrial hose reels and rotary equipment
Key Features:
-
Nickel-plated brass housing with stainless steel internal components
-
With 1x thrust ball bearing
-
Designed to support both thrust and radial loads
-
Corrosion resistant and ideal for sanitary environments
-
High-flow capacity with low-RPM stability
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTM
-
Nominal Width (NW): 1/2"
-
Diameter: 1.64"
-
Overall Length: 3.81"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTM
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 0.87
Diameter (D1): 1.64"
Diameter 2 (D2): 1.64
Length 1 (L1) (overall length): 3.81"
Length 2 (L2): 2.09
Length 3 (L3): 0.59
Length 4 (L4): 0.63
Length 5 (L5): 0.75
Weight: 23.2oz
The Mosmatic DGE Swivel - 34.867 is a heavy-duty, high-flow swivel engineered for demanding high-pressure applications that involve thrust and radial forces. Featuring a nickel-plated brass body and stainless steel interior, this swivel offers excellent corrosion resistance and is ideal for use in both industrial and food service environments. Equipped with a 1x thrust ball bearing, ensuring dependable performance, it provides smooth rotation and long-lasting performance under continuous use. Rated for 2900 PSI and up to 250°F, this swivel is built for durability and fluid transfer efficiency.
Applications:
-
High-pressure industrial fluid systems
-
Food and beverage processing and washdown
-
Sanitary and chemical handling systems
-
Low-RPM, high-flow rotary connections
Key Features:
-
Nickel-plated brass housing with corrosion-resistant stainless steel internals
-
With 1x thrust ball bearing
-
Handles both thrust and radial force loads
-
High-flow performance for heavy-duty use
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTF
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.35"
-
Overall Length: 4.15"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTF
Nominal Width (NW): 1 1/2"
Wrench Size 1 (SW1): 2.13
Wrench Size 2 (SW2): 2.76
Diameter (D): 3.35"
Length 1 (L1) (overall length): 4.15"
Length 2 (L2): 2.87
Weight: 93.9oz
The Mosmatic DGE Swivel - 34.866 is a premium, high-flow swivel engineered for high-pressure systems that require smooth operation under thrust and radial forces. Made from nickel-plated brass with a stainless steel interior, this swivel delivers long-lasting corrosion resistance and strength in both industrial and food service environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, stability, and efficient rotation even under continuous, low-RPM operation. Rated for up to 2900 PSI and 250°F, it's ideal for rigorous fluid transfer and cleaning processes.
Applications:
-
Industrial fluid and pressure systems
-
Food and beverage processing equipment
-
Sanitary washdown and rinsing stations
-
Chemical and water handling applications
Key Features:
-
Nickel-plated brass body with stainless steel internals
-
With 1x thrust ball bearing
-
Handles both radial and thrust loads with ease
-
Designed for high-flow, low-RPM, high-pressure performance
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTF
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.36"
-
Overall Length: 3.94"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTF
Nominal Width (NW): 1 1/4"
Wrench Size 1 (SW1): 1.97
Wrench Size 2 (SW2): 1.97
Diameter (D): 2.36"
Length 1 (L1) (overall length): 3.94"
Length 2 (L2): 2.66
Weight: 50.0oz
The Mosmatic DGE Swivel - 34.865 is a robust and corrosion-resistant swivel designed for high-pressure applications that require dependable performance under both thrust and radial loads. Built with a nickel-plated brass body and a stainless steel interior, this swivel is ideal for industrial, food-grade, and sanitary fluid systems. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, and smooth, stable operation in high-flow, low-RPM environments. Rated up to 2900 PSI and capable of withstanding temperatures up to 250°F, this swivel delivers both durability and precision.
Applications:
-
High-pressure industrial fluid transfer
-
Food and beverage processing equipment
-
Cleaning, washdown, and sanitation systems
-
Chemical and water handling in hygienic environments
Key Features:
-
Corrosion-resistant nickel-plated brass housing with stainless steel internal parts
-
With 1x thrust ball bearing
-
Designed to manage both thrust and radial forces
-
High-flow performance for pressure-sensitive operations
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTF
-
Nominal Width (NW): 1"
-
Diameter: 2.36"
-
Overall Length: 3.56"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTF
Nominal Width (NW): 1"
Wrench Size 1 (SW1): 1.42
Wrench Size 2 (SW2): 1.97
Diameter (D): 2.36"
Length 1 (L1) (overall length): 3.56"
Length 2 (L2): 2.36
Weight: 44.0oz
The Mosmatic DGE Swivel - 34.864 is a high-performance swivel designed for high-pressure, high-flow applications that involve both thrust and radial forces. Built from nickel-plated brass with a stainless steel interior, this swivel offers superior corrosion resistance and is well-suited for industrial, food-grade, and sanitary environments. It features a 1x thrust ball bearing, ensuring dependable performance, smooth, low-RPM operation, and extended service life. With a pressure rating of 4000 PSI and temperature tolerance up to 250°F, it delivers reliable and efficient performance in demanding systems.
Applications:
-
High-pressure industrial fluid systems
-
Food and beverage processing and sanitation equipment
-
Chemical transfer and washdown stations
-
Low-RPM, high-torque fluid handling applications
Key Features:
-
Durable nickel-plated brass housing with stainless steel internals
-
With 1x thrust ball bearing
-
Engineered for both thrust and radial load handling
-
High-flow capacity with excellent corrosion resistance
-
Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTF
-
Nominal Width (NW): 3/4"
-
Diameter: 1.97"
-
Overall Length: 3.39"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/4"NPTF
Thread Out: G2 3/4"NPTF
Nominal Width (NW): 3/4"
Wrench Size 1 (SW1): 1.26
Wrench Size 2 (SW2): 1.57
Diameter (D): 1.97"
Length 1 (L1) (overall length): 3.39"
Length 2 (L2): 2.38
Weight: 31.8oz
The Mosmatic DGE Swivel - 34.863 is a precision-engineered swivel designed for managing thrust and radial forces in high-pressure fluid systems. Constructed from nickel-plated brass with a stainless steel interior, it offers excellent corrosion resistance and long-lasting performance in both industrial and food-grade environments. Equipped with a 1x thrust ball bearing, ensuring dependable performance., this swivel supports smooth and stable operation under continuous use. Rated for up to 4000 PSI and 250°F, it's ideal for demanding fluid handling and sanitation systems.
Applications:
-
Industrial fluid and pressure wash systems
-
Food and beverage processing equipment
-
Sanitary cleaning and washdown operations
-
High-pressure chemical and water transfer lines
Key Features:
-
Nickel-plated brass body with stainless steel internal components
-
With 1x thrust ball bearing
-
Corrosion resistant and suitable for hygienic applications
-
Supports both thrust and radial loads
-
High-flow, high-pressure rated performance
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTF
-
Nominal Width (NW): 1/2"
-
Diameter: 1.65"
-
Overall Length: 3.15"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTF
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 1.06
Wrench Size 2 (SW2): 1.38
Diameter (D): 1.65"
Length 1 (L1) (overall length): 3.15"
Length 2 (L2): 2.17
Weight: 22.0oz
The Mosmatic DGE Swivel - 34.862 is a high-performance swivel designed to manage thrust and radial forces in high-pressure, high-flow applications. Constructed from nickel-plated brass with a stainless steel interior, this swivel ensures excellent corrosion resistance and long-term durability in industrial and food-grade environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, and smooth rotation. With a pressure rating of up to 4000 PSI and a temperature capacity of 250°F, this swivel is ideal for demanding fluid handling applications.
Applications:
-
High-pressure cleaning and fluid transfer systems
-
Food and beverage processing lines
-
Chemical and sanitary washdown operations
-
Industrial equipment requiring low-RPM, high-torque connections
Key Features:
-
Nickel-plated brass body with stainless steel interior
-
With 1x thrust ball bearing
-
Supports both thrust and radial force loads
-
High-flow capacity with superior corrosion resistance
-
Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTF
-
Nominal Width (NW): 3/8"
-
Diameter: 1.65"
-
Overall Length: 2.81"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 3/8"NPTF
Nominal Width (NW): 3/8"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 1.38
Diameter (D): 1.65"
Length 1 (L1) (overall length): 2.81"
Length 2 (L2): 2.05
Weight: 10.4oz
The Mosmatic DGE Swivel - 34.857 is a heavy-duty, high-flow swivel designed for managing thrust and radial forces in high-pressure systems. Constructed with a nickel-plated brass body and a stainless steel interior, this swivel is corrosion resistant and built for durability in industrial and food service environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, and smooth, consistent operation. Capable of withstanding pressures up to 2900 PSI and temperatures up to 250°F, it is ideal for demanding cleaning and fluid transfer applications.
Applications:
-
High-pressure fluid transfer systems
-
Food and beverage processing and washdown lines
-
Industrial cleaning equipment
-
Chemical and sanitary fluid systems
Key Features:
-
Corrosion-resistant nickel-plated brass housing with stainless steel internals
-
With 1x thrust ball bearing
-
Handles both thrust and radial loads
-
High-flow design for low-RPM, high-pressure systems
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTM
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.35"
-
Overall Length: 4.41"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTM
Nominal Width (NW): 1 1/2"
Wrench Size 1 (SW1): 2.05
Wrench Size 2 (SW2): 2.76
Diameter (D): 3.35"
Length 1 (L1) (overall length): 4.41"
Length 2 (L2): 2.87
Length 3 (L3): 0.79
Weight: 95.3oz
The Mosmatic DGE Swivel - 34.856 is a high-performance swivel designed to handle thrust and radial forces in high-pressure, high-flow applications. Made from nickel-plated brass with a stainless steel interior, this swivel is engineered for durability, corrosion resistance, and smooth performance in industrial and food service environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance and long service life. With a pressure capacity of up to 2900 PSI and a temperature limit of 250°F, this swivel is ideal for demanding fluid handling operations.
Applications:
-
High-pressure fluid and washdown systems
-
Food and beverage processing lines
-
Industrial sanitation and cleaning stations
-
Chemical and water transfer operations
Key Features:
-
Nickel-plated brass body with corrosion-resistant stainless steel internals
-
With 1x thrust ball bearing
-
Designed for both thrust and radial load support
-
High-flow capacity with reliable, low-RPM operation
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTM
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.36"
-
Overall Length: 4.17"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTM
Nominal Width (NW): 1 1/4"
Wrench Size 1 (SW1): 1.50
Wrench Size 2 (SW2): 1.81
Diameter (D): 2.36"
Length 1 (L1) (overall length): 4.17"
Length 2 (L2): 2.66
Length 3 (L3): 0.79
Weight: 2.36oz
The Mosmatic DGE Swivel - 34.855 is a durable, high-performance swivel designed for use in high-pressure applications requiring both thrust and radial force support. Constructed from nickel-plated brass with a stainless steel interior, this swivel is corrosion-resistant and well-suited for industrial and food-grade environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, ensuring stable rotation, and consistent performance in demanding operations. With a pressure rating of up to 2900 PSI and temperature tolerance up to 250°F, this swivel offers a reliable solution for fluid transfer and cleaning systems.
Applications:
-
Industrial high-pressure cleaning systems
-
Food and beverage processing lines
-
Sanitary washdown and chemical delivery systems
-
High-flow, low-RPM rotary fluid connections
Key Features:
-
Nickel-plated brass construction with stainless steel interior
-
With 1x thrust ball bearing
-
Supports both thrust and radial force applications
-
Corrosion-resistant for long-term industrial or sanitary use
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTM
-
Nominal Width (NW): 1"
-
Diameter: 2.36"
-
Overall Length: 3.54"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTM
Nominal Width (NW): 1"
Wrench Size 1 (SW1): 1.42
Wrench Size 2 (SW2): 1.97
Diameter (D): 2.36"
Length 1 (L1) (overall length): 3.54"
Length 2 (L2): 2.36
Length 3 (L3): 0.71
Weight: 40.3oz
The Mosmatic DGE Swivel - 34.853 is a high-performance swivel engineered for high-pressure fluid systems in industrial and food service environments. Constructed from nickel-plated brass with a stainless steel interior, this swivel is designed to manage both thrust and radial forces with exceptional durability. It features a 1x thrust ball bearing, ensuring dependable performance. With high-flow capabilities and a corrosion-resistant design, this swivel is built to perform in tough applications involving heat, pressure, and demanding sanitation requirements.
Applications:
-
Industrial high-pressure fluid and cleaning systems
-
Food and beverage processing and sanitation equipment
-
Washdown stations and chemical delivery lines
-
High-flow, low-RPM rotary connections
Key Features:
-
Durable nickel-plated brass body with stainless steel interior
-
With 1x thrust ball bearing
-
Handles both thrust and radial loads
-
Optimized for high-flow and high-pressure environments
-
Corrosion-resistant for harsh or sanitary conditions
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTM
-
Nominal Width (NW): 1/2"
-
Diameter: 0.59"
-
Overall Length: 3.15"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTM
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 1.38
Diameter (D): 0.59"
Length 1 (L1) (overall length): 3.15"
Length 2 (L2): 2.17
Length 3 (L3): 0.59
Weight: 18.9oz
The Mosmatic DGE Swivel - 34.852 is a compact, high-pressure swivel engineered for use in industrial and food service environments. Designed to handle both thrust and radial forces, it features a durable nickel-plated brass housing with a stainless steel interior for enhanced corrosion resistance and long-term reliability. The swivel includes a 1x thrust ball bearing, ensuring dependable performance. Rated for up to 4000 PSI and temperatures up to 250°F, this swivel is ideal for demanding fluid handling applications.
Applications:
-
Industrial high-pressure fluid systems
-
Food and beverage processing equipment
-
Cleaning and sanitation systems
-
Chemical and water transfer lines
Key Features:
-
Nickel-plated brass body with corrosion-resistant stainless steel interior
-
With 1x thrust ball bearing
-
Supports both thrust and radial force applications
-
High-flow, high-pressure design
-
Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTM
-
Nominal Width (NW): 3/8"
-
Diameter: 1.65"
-
Overall Length: 2.87"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 3/8"NPTM
Nominal Width (NW): 3/8"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 1.38
Diameter (D): 1.65"
Length 1 (L1) (overall length): 2.87"
Length 2 (L2): 2.05
Length 3 (L3): 0.43
Weight: 18.9oz
The Mosmatic DGE Swivel - 34.787 is a robust stainless steel swivel engineered for high-pressure and high-flow systems that must reliably manage thrust and radial forces. Designed with a durable bearing system—featuring 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, long-lasting performance under continuous use. Rated for 2900 PSI and capable of withstanding temperatures up to 250°F, it is perfect for demanding pharmaceutical, food processing, industrial cleaning, and automatic car wash applications.
Applications:
-
Food and beverage production and sanitation lines
-
Pharmaceutical clean-in-place (CIP) systems
-
Industrial fluid handling and high-pressure washdowns
-
Rotary spray arms and booms in automatic car washes
Key Features:
-
Corrosion-resistant stainless steel construction
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Supports both thrust and radial loads with high stability
-
High-flow performance designed for low-RPM, high-pressure use
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTF
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.33"
-
Overall Length: 5.87"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTF
Nominal Width (NW): 1 1/2"
Wrench Size (SW1): 2.13
Diameter 1 (D1): 3.33"
Diameter 2 (D2): 3.98
Length 1 (L1) (overall length): 5.87"
Length 2 (L2): 3.17
Length 4 (L4): 1.66
Length 5 (L5): 1.42
Weight: 181.5oz
Showing 30/60
Cleaning News
Cleaning News
Cleaning News