Car Wash
Car Wash Parts designed to keep your vehicle cleaning systems running smoothly, efficiently, and reliably. This collection includes essential replacement components and upgrade parts that help maintain optimal performance in both professional car wash setups and mobile detailing operations.
As an important segment of the broader Auto & Vehicle Cleaning Equipment category, these car wash parts support everything from routine maintenance to full system enhancements. With components built for durability and consistent water flow, you can keep your wash bays, pressure systems, and detailing tools operating at their best while minimizing downtime.
This collection is ideal for car wash operators, detailers, and mobile service professionals who want to extend equipment lifespan, prevent unexpected failures, and ensure high-quality cleaning results. Whether you’re replacing worn components or upgrading critical parts, these solutions help maintain reliability and enhance overall performance.
Use these car wash parts as part of a complete auto & vehicle cleaning workflow to keep your systems in top condition and deliver consistent, professional-grade service. With the right parts in place, you can improve efficiency, reduce maintenance interruptions, and provide superior cleaning results for every vehicle.
Sort by:
The Mosmatic DGE Swivel - 34.752 is a premium-grade stainless steel swivel designed to withstand thrust and radial forces in high-pressure and high-flow applications. Engineered for use in pharmaceutical, food service, automatic car wash, and industrial environments, this swivel delivers excellent performance and reliability. It features 1x thrust ball bearing and 2x sliding bearings for stable, smooth operation. Built with corrosion-resistant materials and rated for up to 5000 PSI and 250°F, it's ideal for demanding, continuous-use systems.
Applications:
-
Pharmaceutical production and processing
-
Food and beverage sanitation systems
-
Automatic car wash and rinse equipment
-
Industrial washdown and fluid transfer
Key Features:
-
Heavy-duty stainless steel construction for superior corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
High-flow design for efficient pressure handling
-
Supports both thrust and radial loads
-
Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTM
-
Nominal Width (NW): 3/8"
-
Diameter: 1.65"
-
Overall Length: 2.87"
-
Max Pressure: 5000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 5000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 3/8"NPTM
Nominal Width (NW): 3/8"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 1.38
Diameter (D1): 1.65"
Length 1 (L1) (overall length): 2.87"
Length 2 (L2): 2.05
Length 3 (L3): 0.43
Weight: 18.9oz
The Mosmatic DGR Swivel - 34.612 is a heavy-duty stainless steel swivel designed to handle both thrust and radial forces in high-pressure, high-flow applications. Ideal for industrial and food service environments, this swivel features a quadruple bearing system—two radial ball bearings and two thrust ball bearings—that provides maximum strength, smooth rotation, and long-lasting durability. The corrosion-resistant stainless steel construction ensures reliable performance even in harsh chemical and sanitary environments.
Applications:
-
High-pressure industrial fluid systems
-
Food and beverage processing and sanitation lines
-
Chemical transfer and washdown systems
-
High-capacity automated cleaning and rinsing systems
Key Features:
-
Corrosion-resistant stainless steel body
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Supports both radial and thrust loads
-
High-flow performance for large-scale operations
-
Thread IN: 2" NPTF | Thread OUT: 2" NPTF
-
Nominal Width (NW): 2"
-
Diameter: 3.54"
-
Overall Length: 6.70"
-
Max Pressure: 3000 PSI
-
Max RPM: 70
-
Operating Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 70
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 2"NPTF
Thread Out: G2 2"NPTF
Nominal Width (NW): 2"
Wrench Size 1 (SW1): 2.95
Wrench Size 2 (SW2): 2.56
Diameter (D): 3.54"
Length 1 (L1) (overall length): 6.70"
Length 2 (L2): 4.57
Weight: 133oz
The Mosmatic DGR Swivel - 34.611 is a robust stainless steel swivel designed for high-pressure, high-flow applications requiring both thrust and radial force handling. Built for industrial and food service environments, this swivel features a quadruple bearing system—including two radial and two thrust ball bearings—for optimal rotational performance and durability under load. Its stainless steel construction ensures long-term corrosion resistance, making it ideal for harsh operating conditions involving chemicals, water, or cleaning agents.
Applications:
-
High-pressure industrial fluid systems
-
Food and beverage sanitation and processing lines
-
Chemical transfer and mixing systems
-
High-flow automated washdown and spray equipment
Key Features:
-
Stainless steel body for maximum corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Engineered to handle both radial and thrust forces
-
High-flow capacity for demanding operations
-
Thread IN: 2" NPTF | Thread OUT: 2" NPTM
-
Nominal Width (NW): 2"
-
Diameter: 3.54"
-
Overall Length: 6.54"
-
Max Pressure: 3000 PSI
-
Max RPM: 70
-
Operating Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 70
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 2"NPTF
Thread Out: G2 2"NPTM
Nominal Width (NW): 2"
Wrench Size 1 (SW1): 2.95
Wrench Size 2 (SW2): 2.44
Diameter (D): 3.54"
Length 1 (L1) (overall length): 6.54"
Length 2 (L2): 4.57
Length 3 (L3): 0.87
Weight: 132oz
The Mosmatic DGR Swivel - 34.542 is a robust stainless steel swivel engineered to handle both thrust and radial forces in high-pressure, high-flow systems. Ideal for industrial and food-grade applications, this swivel features a quadruple bearing system—two radial ball bearings and two thrust ball bearings—for smooth, efficient, and long-lasting performance. Its corrosion-resistant construction ensures durability in harsh environments, while the high-flow design supports demanding cleaning and fluid transfer operations.
Applications:
-
High-pressure fluid transfer systems
-
Food and beverage processing equipment
-
Sanitation and washdown systems
-
Industrial chemical and water handling
Key Features:
-
Heavy-duty stainless steel for corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Built to handle both radial and thrust force loads
-
High-flow design for continuous-duty applications
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTF
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.36"
-
Overall Length: 5.65"
-
Max Pressure: 3000 PSI
-
Max RPM: 130
-
Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 130
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTF
Nominal Width (NW): 1 1/4"
Wrench Size 1 (SW1): 2
Wrench Size 2 (SW2): 173
Diameter (D): 2.36"
Length 1 (L1) (overall length): 5.65"
Length 2 (L2): 3.98
Weight: 61oz
The Mosmatic DGR Swivel - 34.541 is a premium stainless steel swivel engineered for high-flow, high-pressure applications requiring robust support for both thrust and radial forces. Designed for demanding industrial and food service environments, this swivel includes a quadruple bearing system with two radial ball bearings and two thrust ball bearings for smooth, reliable rotation under load. Its corrosion-resistant stainless steel body ensures long-lasting durability, even in harsh conditions. Optimized for performance and flow efficiency, this swivel is ideal for large-scale fluid handling operations.
Applications:
-
Industrial high-pressure systems
-
Food and beverage processing equipment
-
Chemical transfer and sanitation systems
-
High-flow rotary unions and automated machinery
Key Features:
-
Corrosion-resistant stainless steel construction
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Handles both radial and thrust forces efficiently
-
High-flow design for demanding applications
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTM
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.36"
-
Overall Length: 5.57"
-
Max Pressure: 3000 PSI
-
Max RPM: 130
-
Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 130
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTM
Nominal Width (NW): 1 1/4"
Wrench Size 1 (SW1): 2
Wrench Size 2 (SW2): 1.73
Diameter (D): 2.36"
Length 1 (L1) (overall length): 5.57"
Length 2 (L2): 3.98
Length 3 (L3): 0.71
Weight: 62oz
The Mosmatic DGR Swivel - 34.512 is a premium stainless steel swivel engineered for high-pressure systems that require handling of both thrust and radial forces. Built for demanding industrial and food service applications, this swivel features a quadruple bearing system—two radial ball bearings and two thrust ball bearings—ensuring smooth, stable rotation under load. Designed for high-flow performance and long-term durability, its corrosion-resistant stainless steel body withstands aggressive cleaning agents, chemicals, and harsh environments.
Applications:
-
Industrial high-pressure fluid and washdown systems
-
Food processing and sanitation operations
-
Chemical and water transfer lines
-
High-capacity automated cleaning systems
Key Features:
-
Rugged stainless steel construction for superior corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Designed to handle both radial and thrust loads
-
High-flow design for heavy-duty fluid transfer
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTF
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.15"
-
Overall Length: 6.06"
-
Max Pressure: 3000 PSI
-
Max RPM: 100
-
Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 100
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTF
Nominal Width (NW): 1 1/2"
Wrench Size 1 (SW1): 2.56
Wrench Size 2 (SW2): 2.17
Diameter (D): 3.15"
Length 1 (L1) (overall length): 6.06"
Length 2 (L2): 4.09
Weight: 114oz
The Mosmatic DGR Swivel - 34.511 is a heavy-duty stainless steel swivel designed for high-pressure applications where both thrust and radial forces are present. Built for performance in industrial and food service environments, this swivel includes a quadruple bearing system—two radial ball bearings and two thrust ball bearings—for maximum stability and smooth operation under demanding conditions. Its corrosion-resistant stainless steel body supports high flow rates and provides exceptional durability in harsh environments, making it ideal for continuous-duty fluid systems.
Applications:
-
High-pressure industrial fluid handling
-
Food processing and sanitation systems
-
Chemical transfer operations
-
Automated washdown and cleaning systems
Key Features:
-
High-strength stainless steel for corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Supports both radial and thrust force applications
-
High-flow design for large-volume operations
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTM
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.15"
-
Overall Length: 6.06"
-
Max Pressure: 3000 PSI
-
Max RPM: 100
-
Operating Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 100
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTM
Nominal Width (NW): 1 1/2"
Wrench Size 1 (SW1): 2.56
Wrench Size 2 (SW2): 2.17
Diameter (D): 3.15"
Length 1 (L1) (overall length): 6.06"
Length 2 (L2): 4.09
Length 3 (L3): 0.79
Weight: 111oz
The Mosmatic DGR Swivel - 34.412 is a stainless steel swivel built to manage both thrust and radial forces in high-pressure environments. Ideal for industrial and food service applications, this swivel features a quadruple bearing system—two radial ball bearings and two thrust ball bearings—for maximum rotational stability and performance. Its corrosion-resistant construction and high-flow design make it suitable for harsh, continuous-duty operations involving water, chemicals, or sanitation fluids.
Applications:
-
High-pressure industrial fluid systems
-
Food and beverage processing lines
-
Sanitation and washdown equipment
-
Chemical and water transfer operations
Key Features:
-
Corrosion-resistant stainless steel body
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Designed to handle both radial and thrust loads
-
Optimized for high-flow and high-pressure performance
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTF
-
Nominal Width (NW): 1"
-
Diameter: 2.36"
-
Overall Length: 5.55"
-
Max Pressure: 3000 PSI
-
Max RPM: 130
-
Operating Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 130
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTF
Nominal Width (NW): 1"
Wrench Size 1 (SW1): 3.78
Wrench Size 2 (SW2): 1.42
Diameter (D): 2.36"
Length 1 (L1) (overall length): 5.55"
Length 2 (L2): 3.78
Weight: 60oz
The Mosmatic DGR Swivel - 34.411 is a high-performance stainless steel swivel engineered for use in high-pressure systems where both thrust and radial forces are present. Ideal for industrial and food service applications, this swivel features a quadruple bearing system—two radial ball bearings and two thrust ball bearings—for optimal load distribution and smooth rotation. Built for high-flow applications, its stainless steel body provides excellent corrosion resistance in harsh environments, ensuring long-lasting durability and consistent performance.
Applications:
-
Industrial high-pressure fluid systems
-
Food processing and sanitary washdown equipment
-
Chemical handling and transfer systems
-
High-flow rotary joints in automated processes
Key Features:
-
Corrosion-resistant stainless steel construction
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Designed to handle both thrust and radial loads
-
High-flow capability for efficient performance
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTM
-
Nominal Width (NW): 1"
-
Diameter: 2.36"
-
Overall Length: 5.31"
-
Max Pressure: 3000 PSI
-
Max RPM: 130
-
Operating Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 130
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTM
Nominal Width (NW): 1"
Wrench Size 1 (SW1): 1.81
Wrench Size 2 (SW2): 1.42
Diameter (D): 2.36"
Length 1 (L1) (overall length): 5.31"
Length 2 (L2): 3.78
Length 3 (L3): 0.71
Weight: 59oz
The Mosmatic DGR Swivel - 34.312 is a high-performance stainless steel swivel designed to handle both thrust and radial forces in high-pressure environments. Perfect for industrial and food service applications, this swivel features a quadruple bearing system with two radial ball bearings and two thrust ball bearings, ensuring smooth, stable operation under heavy load. Its corrosion-resistant stainless steel construction makes it suitable for harsh, high-moisture, or chemical environments, while the high-flow design enhances system efficiency.
Applications:
-
Industrial high-pressure cleaning systems
-
Food and beverage processing equipment
-
Sanitation and washdown systems
-
Chemical transfer and fluid handling
Key Features:
-
Corrosion-resistant stainless steel body
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Supports both radial and thrust load applications
-
High-flow performance for continuous-duty systems
-
Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTF
-
Nominal Width (NW): 3/4"
-
Diameter: 2.17"
-
Overall Length: 5.55"
-
Max Pressure: 3000 PSI
-
Max RPM: 150
-
Operating Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 150
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/4"NPTF
Thread Out: G2 3/4"NPTF
Nominal Width (NW): 3/4"
Wrench Size 1 (SW1): 1.65
Wrench Size 2 (SW2): 1.26
Diameter (D): 2.17"
Length 1 (L1) (overall length): 5.55"
Length 2 (L2): 3.66
Weight: 53 oz
The Mosmatic DGR Swivel - 34.212 is a high-performance stainless steel swivel engineered to withstand both thrust and radial forces in high-pressure, high-flow environments. Designed for industrial and food service applications, it features a quadruple bearing system—two radial ball bearings and two thrust ball bearings—for smooth, stable, and long-lasting performance. Its corrosion-resistant construction makes it ideal for use in harsh environments involving water, chemicals, or sanitation processes. With high-flow capacity and robust design, it delivers reliable results in demanding systems.
Applications:
-
High-pressure industrial cleaning systems
-
Food processing and sanitation lines
-
Chemical and fluid transfer systems
-
Automated washdown and spray equipment
Key Features:
-
Heavy-duty stainless steel body for corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Designed for both radial and thrust force applications
-
High-flow capacity for performance-intensive operations
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTF
-
Nominal Width (NW): 1/2"
-
Diameter: 1.97"
-
Overall Length: 4.92"
-
Max Pressure: 3000 PSI
-
Max RPM: 200
-
Operating Temperature: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 200
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTF
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 1.50
Wrench Size 2 (SW2): 1.06
Diameter (D): 1.97"
Length 1 (L1) (overall length): 4.92"
Length 2 (L2): 3.43
Weight: 41.0oz
The Mosmatic DGR Swivel - 34.211 is a heavy-duty stainless steel swivel designed for high-pressure applications involving both thrust and radial forces. Engineered for durability and performance, this swivel is ideal for industrial and food service environments where high flow and corrosion resistance are essential. It features a robust quadruple bearing system—two radial ball bearings and two thrust ball bearings—for optimal load handling and smooth operation. Its stainless steel construction ensures resistance to harsh chemicals and corrosion, making it a reliable solution for demanding operational conditions.
Applications:
-
Industrial high-pressure systems
-
Food service and sanitation equipment
-
Chemical and fluid transfer systems
-
High-flow rotary connections
Key Features:
-
Heavy-duty stainless steel construction for corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Designed to handle both thrust and radial forces
-
High-flow performance under continuous pressure
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTM
-
Nominal Width (NW): 1/2"
-
Diameter: 1.97"
-
Overall Length: 4.69"
-
Max Pressure: 3000 PSI
-
Max RPM: 200
-
Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 200
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTM
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 1.50
Wrench Size 2 (SW2): 1.06
Diameter (D): 1.97"
Length 1 (L1) (overall length): 4.69"
Length 2 (L2): 3.43"
Length 3 (L3): 0.59"
Weight: 41.0oz
Ensure smooth and reliable swivel operation with the Mosmatic DGG, DGS, and DGL Swivels Seal Kit 33.910 - NW 1/4”. This precision-engineered replacement kit features high-quality O-Ring NBR seals, designed specifically for swivels with a nominal width of ¼ inch. Built to withstand thrust and radial forces, it is ideal for high-flow and high-pressure applications including automatic car wash systems, hose reels, tire cleaners, self-rotating equipment, ceiling booms, parts washers, and hydraulic systems. Keep your swivel performing like new in demanding environments.
The Mosmatic 29.803 Handle with Filter Sieve is a compact and ergonomic accessory designed for pressure washer systems. Built from durable hard plastic, this handle integrates a filter sieve to protect equipment by capturing debris before it enters your high-pressure system.
Featuring a G1/4" male thread inlet and a G1/4" female thread outlet, the handle offers easy integration with spray guns, lances, and cleaning tools—ideal for maintaining performance and equipment longevity in demanding wash environments.
Applications
-
Car wash spray guns and foam applicators
-
High-pressure cleaning wands and lances
-
Commercial and industrial pressure washer setups
-
Any cleaning tool requiring inline filtration and user comfort
Key Features
-
Thread Inlet: G1/4" M | Thread Outlet: G1/4" F
-
Built-in filter sieve for protection against debris
-
Made of hard plastic for lightweight durability
-
Ergonomic design for enhanced handling and comfort
-
Compatible with a wide range of pressure washer tools
-
Helps extend equipment life and improve performance
Specs
Material Type: Hard Plastic
Thread IN G1/4" M,
Thread OUT: G1/4" F
Weight: 0.7 lbs
The Mosmatic 29.802 Handle with Filter Sieve is a high-performance accessory designed to offer both user control and system protection in high-pressure cleaning applications. Constructed from durable hard plastic, this ergonomic handle includes a built-in filter sieve that prevents dirt and debris from entering your equipment, helping to maintain optimal performance and extend service life.
Featuring a G3/8" male thread inlet and an M12 x 1 female thread outlet, it integrates easily with various pressure washer guns, lances, and accessories for seamless operation.
Applications
-
High-pressure washer systems
-
Car wash spray tools and foam applications
-
Industrial cleaning and maintenance equipment
-
Any cleaning tool requiring ergonomic handling and filtration
Key Features
-
Thread Inlet: G3/8" M | Thread Outlet: M12 x 1 F
-
Made of hard plastic for durability and a lightweight grip
-
Built-in filter sieve to block contaminants and extend tool life
-
Ergonomic handle design for comfortable, controlled use
-
Compatible with pressure washing tools and systems
-
Ideal for professional and industrial cleaning environments
Specs
Material Type: Hard Plastic
Thread IN G3/8" M,
Thread OUT: M12 x 1 F
Weight: 0.7 lbs
Showing 225/372
Cleaning News
Cleaning News
Cleaning News