Car Wash
Car Wash Parts designed to keep your vehicle cleaning systems running smoothly, efficiently, and reliably. This collection includes essential replacement components and upgrade parts that help maintain optimal performance in both professional car wash setups and mobile detailing operations.
As an important segment of the broader Auto & Vehicle Cleaning Equipment category, these car wash parts support everything from routine maintenance to full system enhancements. With components built for durability and consistent water flow, you can keep your wash bays, pressure systems, and detailing tools operating at their best while minimizing downtime.
This collection is ideal for car wash operators, detailers, and mobile service professionals who want to extend equipment lifespan, prevent unexpected failures, and ensure high-quality cleaning results. Whether you’re replacing worn components or upgrading critical parts, these solutions help maintain reliability and enhance overall performance.
Use these car wash parts as part of a complete auto & vehicle cleaning workflow to keep your systems in top condition and deliver consistent, professional-grade service. With the right parts in place, you can improve efficiency, reduce maintenance interruptions, and provide superior cleaning results for every vehicle.
Sort by:
The Mosmatic Complete Spider – 81.933 is a premium stainless-steel rotary-head engineered for high-performance cleaning in heavy-duty environments. Equipped with four hydro-driven stabilizer nozzles, this powerful rotary tool delivers extended cleaning range and strong impact pressure—ideal for tackling heavy debris on industrial vehicles and large surfaces.
Air injection technology enhances the water stream’s reach and impact, ensuring a thorough clean from a greater distance without pressure loss. Built to endure demanding applications, the Complete Spider is pressure-rated up to 2500 psi and heat-resistant up to 250°F. Its rugged design and high-impact output make it a top-tier solution for professional cleaning systems.
Note: Requires 4xEG-nozzles (not included), sized to match your pump specifications.
Applications
-
Train and railcar cleaning
-
Bus and fleet maintenance
-
Truck and trailer washing
-
Construction vehicle detailing
-
Military vehicle cleaning
-
Container and cargo wash systems
Key Features
-
Full stainless steel construction for long-term durability
-
Thread In: G1 3/8” NPTF
-
Nominal width: 9 inches
-
Maximum pressure: 2500 psi
-
Maximum temperature: 250°F
-
Hydro-driven rotary head with stabilizer nozzles
-
Air injection for enhanced water flow and impact
-
Ideal for long-distance cleaning without pressure loss
Included
Swivel: DXTI - 39.663
Rotor Arm: 4w4 - 82.954
Stabilizer Nozzles: 4 x 14.901
Bolts: 3 x Mounting Bolts
Specs
Pressure: 2500 psi
Temperature: 250°
Material Type: Stainless steel
Thread In: G1 3/8” NPTF
Nominal Width (NW): 9”
Weight: 5 lbs
Upgrade your foam application system with the Mosmatic Foam Chemical Regulator with Metering Valve - 90.087, a brass unit engineered for precision chemical dosing and durable performance. This regulator seamlessly installs between your pressure washer and high-pressure hose, offering unmatched control over your foam output.
With an adjustable metering dial, users can fine-tune chemical concentration levels to achieve either thick or thin foam coverage—ideal for varying wash or sanitation requirements. Whether used in car washes, industrial cleaning, or the food industry, this regulator enhances efficiency by ensuring proper chemical saturation and consistent foam quality.
The unit measures 6'7" in length and features M22 In/Out connections with a brass fitting and 1.6 nozzle size, making it compatible with most commercial pressure washing systems. Built to withstand pressures up to 4500 PSI and temperatures up to 212°F, it supports a maximum flow of 12 GPM and a pH range of 3–12 for versatile chemical use. Ergonomically designed and easy to handle, this regulator is a valuable addition to any self-serve or professional wash bay.
Applications
-
Self-service and automatic car wash systems
-
Commercial pressure washing setups
-
Food processing and sanitation facilities
-
Fleet and heavy-duty vehicle cleaning
-
Industrial and facility maintenance
Features
-
Precision Chemical Control: Integrated dial for adjustable foam thickness
-
High-Pressure Ready: Rated for up to 4500 PSI and 212°F
-
Ergonomic Design: Easy to install and operate with minimal effort
-
Flexible Chemical Use: Compatible with solutions from pH 3 to 12
-
Efficient Throughput: Supports up to 12 GPM
-
Standard Connectivity: M22 In/Out with brass fittings and 1.6 nozzle size
-
Versatile Application: Suitable for car wash, industrial, and food-grade cleaning
Specs
Material Type: Brass
Pressure: 4500 psi
Temperature: 212°F
Thread In: M22
Thread Out: M22
Length: 6'7"
Throughput: max 12 gpm
Throughput medium: ph 3-12
Weight: 2.0 lbs
The Mosmatic WheelBlaster Pro with Stand - 84.546 is a cutting-edge wheel and underbody cleaning system engineered for maximum impact and flexibility in professional vehicle wash environments. Constructed from polished stainless steel, this heavy-duty cleaning unit is built to perform in high-demand applications, delivering superior cleaning power for wheels, chassis, and hard-to-reach vehicle components.
The adjustable wash head allows seamless control of height and cleaning angle, ensuring optimal coverage and precision. Equipped with a rotor arm, DYTI swivel, and four stabilizer nozzles, this system delivers high-impact cleaning at a distance—up to 48" of coverage from 40" away. The 39” stainless steel stand supports the mounting of multiple heads for even greater surface area reach and operational efficiency.
Designed for use in environments with pressures up to 4000 PSI, temperatures up to 250°F, and rotational speeds of up to 2000 RPM, the WheelBlaster Pro is compatible with a wide range of chemicals (pH 3–12) and features a ⅜” NPTF thread-in. This unit arrives fully equipped and ready for integration—nozzles not included.
Applications
-
Commercial car wash tunnels and bays
-
Fleet and truck wash systems
-
Public transportation vehicle maintenance
-
Agriculture and construction equipment cleaning
-
Heavy-duty industrial cleaning systems
Features
-
Polished Stainless Steel Construction: Built for corrosion resistance and long-term durability
-
Adjustable Cleaning Angle & Height: Customizable wash head for precision cleaning
-
High Impact at Distance: Cleans up to 48" from 40" away
-
Rotor Arm with DYTI Swivel: Smooth, controlled rotation up to 2000 RPM
-
Stabilizer Nozzles Included: Four nozzles increase reach and cleaning power (main nozzles sold separately)
-
Mount Multiple Heads: 39” stand allows expansion for broader cleaning coverage
-
High-Pressure & Temperature Tolerance: Rated for 4000 PSI and 250°F
-
Chemical Compatibility: Operates effectively with cleaning agents from pH 3 to 12
-
Thread-In Connection: Standard ⅜” NPTF inlet
Included
Wheelblaster Head: Yes
Stand: Yes
Swivel: DYTIs
Rotor arm: 6"/6"
Stablizier Nozzle : 4x 14.901
Specs
Material Type: Stainless steel
Pressure: 4000 PSI
Temperature: 250°F
RPM: up to 2000
Thread In: ⅜” NPTF
Diameter: 10"
Throughput medium: ph 3-12
Weight: 27.0 lbs
The Mosmatic WheelBlaster WBL 21" - 84.519 is a high-performance wheel and undercarriage cleaning solution, built for demanding vehicle wash environments. Crafted from polished stainless steel, this premium 21” unit delivers powerful, high-impact cleaning while maintaining exceptional durability and chemical resistance.
Designed with a DYT swivel featuring a quadruple bearing system, this model ensures ultra-smooth rotation, extended service life, and outstanding performance under continuous use. The unit includes a rotor arm and four stabilizer nozzles, increasing impact strength and cleaning distance for maximum coverage and precision.
Engineered to handle pressures up to 4000 PSI, temperatures up to 250°F, and rotation speeds up to 2000 RPM, the WBL 21" offers unmatched efficiency in vehicle wash systems. The unit connects via a ⅜” NPTF thread-in inlet and includes four 1/8” NPTF nozzle ports, and is chemically compatible with agents ranging from pH 3 to 12.
Note: High-pressure nozzles are not included.
Applications
-
Tunnel car washes and automated wash bays
-
Fleet and heavy truck cleaning systems
-
Bus, train, and public transport maintenance
-
Commercial vehicle detailing and service centers
-
Agricultural and industrial vehicle wash operations
Features
-
Quadruple Bearing System: Enhanced durability and smooth rotation
-
Polished Stainless Steel Construction: Corrosion-resistant and built to last
-
21” Rotor Arm: Wide coverage for faster, more efficient cleaning
-
DYT Swivel with Rotor Arm: Ensures reliable, high-speed 360° operation
-
4 Stabilizer Nozzles: Improves distance and cleaning power (main nozzles not included)
-
High Performance Ratings: Handles up to 4000 PSI and 250°F
-
Nozzle Configuration: ⅜” NPTF thread-in, 4x 1/8” NPTF nozzle ports
-
Chemical Compatibility: Supports solutions within pH 3–12 range
Included
Wheelblaster Head: No
Stand: No
Swivel: DYT
Rotor arm: 18.5"/14"
Specs
Material Type: Stainless steel
Pressure: 4000 PSI
Temperature: 250°F
RPM: up to 2000
Thread In: ⅜” NPTF
Throughput medium: ph 3-12
Weight: 18.7 lbs
The Mosmatic WheelBlaster WBL 21" - 84.514 is a high-performance cleaning tool specifically designed for professional vehicle wash systems. With its polished stainless steel construction and advanced design, this 21-inch wheel blaster delivers exceptional cleaning power for wheels, wheel wells, and underbody components.
Equipped with a DYF swivel, rotor arm, and four stabilizer nozzles, the WBL 21" offers enhanced reach and impact force for deep, effective cleaning. The nozzle configuration increases the cleaning radius and ensures thorough dirt and debris removal in a fraction of the time. Its triple bearing system ensures smoother rotation, improved longevity, and reduced maintenance, making it ideal for high-volume, high-speed wash applications.
Designed to operate under high pressures up to 4000 PSI, temperatures up to 250°F, and rotational speeds up to 2000 RPM, this unit excels in high-demand environments. It features a ⅜” NPTF thread-in inlet and four 1/8” NPTF nozzle ports. With chemical compatibility ranging from pH 3 to 12, this wheel blaster integrates seamlessly into existing wash systems.
Note: Cleaning nozzles are not included.
Applications
-
Tunnel and rollover car washes
-
Commercial fleet and truck wash stations
-
Public transit and heavy vehicle maintenance
-
Detail shops and service centers
-
High-volume vehicle wash bays
Features
-
Polished Stainless Steel Body: Corrosion-resistant and built for durability
-
21” Rotor Arm: Wide cleaning coverage for maximum efficiency
-
DYF Swivel with Rotor Arm: Smooth 360° operation for even cleaning results
-
4 Stabilizer Nozzles: Increased impact and coverage (main HP nozzles not included)
-
High-Pressure & Temperature Rating: Operates at up to 4000 PSI and 250°F
-
Nozzle Connections: Inlet thread ⅜” NPTF, nozzle ports 4x 1/8" NPTF
-
High-Speed Performance: Rotational speed up to 2000 RPM
-
Chemical Compatibility: Suitable for pH 3–12 cleaning agents
- Triple Bearing System: Provides smooth operation and extended lifespan
Included
Wheelblaster Head: No
Stand: No
Swivel: DYF
Rotor arm: 18.5"/14"
Specs
Material Type: Stainless steel
Pressure: 4000 PSI
Temperature: 250°F
RPM: up to 2000
Thread In: ⅜” NPTF
Throughput medium: ph 3-12
Weight: 16.1 lbs
The Mosmatic WheelBlaster WBL 21" - 84.509 is a high-performance wheel and undercarriage cleaning solution, built for demanding vehicle wash environments. Crafted from polished stainless steel, this premium 21” unit delivers powerful, high-impact cleaning while maintaining exceptional durability and chemical resistance.
Designed with a DYT swivel featuring a quadruple bearing system, this model ensures ultra-smooth rotation, extended service life, and outstanding performance under continuous use. The unit includes a rotor arm and four stabilizer nozzles, increasing impact strength and cleaning distance for maximum coverage and precision.
Engineered to handle pressures up to 4000 PSI, temperatures up to 250°F, and rotation speeds up to 2000 RPM, the WBL 21" offers unmatched efficiency in vehicle wash systems. The unit connects via a ⅜” NPTF thread-in inlet and includes four 1/8” NPTF nozzle ports, and is chemically compatible with agents ranging from pH 3 to 12.
Note: High-pressure nozzles are not included.
Applications
-
Tunnel car washes and automated wash bays
-
Fleet and heavy truck cleaning systems
-
Bus, train, and public transport maintenance
-
Commercial vehicle detailing and service centers
-
Agricultural and industrial vehicle wash operations
Features
-
Quadruple Bearing System: Enhanced durability and smooth rotation
-
Polished Stainless Steel Construction: Corrosion-resistant and built to last
-
21” Rotor Arm: Wide coverage for faster, more efficient cleaning
-
DYT Swivel with Rotor Arm: Ensures reliable, high-speed 360° operation
-
4 Stabilizer Nozzles: Improves distance and cleaning power (main nozzles not included)
-
High Performance Ratings: Handles up to 4000 PSI and 250°F
-
Nozzle Configuration: ⅜” NPTF thread-in, 4x 1/8” NPTF nozzle ports
-
Chemical Compatibility: Supports solutions within pH 3–12 range
Included
Wheelblaster Head: No
Stand: No
Swivel: DYT
Rotor arm: 16"/10"
Specs
Material Type: Stainless steel
Pressure: 4000 PSI
Temperature: 250°F
RPM: up to 2000
Thread In: ⅜” NPTF
Throughput medium: ph 3-12
Weight: 18.5 lbs
The Mosmatic WheelBlaster WBL 21" - 84.504 is a high-performance cleaning tool specifically designed for professional vehicle wash systems. With its polished stainless steel construction and advanced design, this 21-inch wheel blaster delivers exceptional cleaning power for wheels, wheel wells, and underbody components.
Equipped with a DYF swivel, rotor arm, and four stabilizer nozzles, the WBL 21" offers enhanced reach and impact force for deep, effective cleaning. The nozzle configuration increases the cleaning radius and ensures thorough dirt and debris removal in a fraction of the time. Its triple bearing system ensures smoother rotation, improved longevity, and reduced maintenance, making it ideal for high-volume, high-speed wash applications.
Designed to operate under high pressures up to 4000 PSI, temperatures up to 250°F, and rotational speeds up to 2000 RPM, this unit excels in high-demand environments. It features a ⅜” NPTF thread-in inlet and four 1/8” NPTF nozzle ports. With chemical compatibility ranging from pH 3 to 12, this wheel blaster integrates seamlessly into existing wash systems.
Note: Cleaning nozzles are not included.
Applications
-
Tunnel and rollover car washes
-
Commercial fleet and truck wash stations
-
Public transit and heavy vehicle maintenance
-
Detail shops and service centers
-
High-volume vehicle wash bays
Features
-
Polished Stainless Steel Body: Corrosion-resistant and built for durability
-
21” Rotor Arm: Wide cleaning coverage for maximum efficiency
-
DYF Swivel with Rotor Arm: Smooth 360° operation for even cleaning results
-
4 Stabilizer Nozzles: Increased impact and coverage (main HP nozzles not included)
-
High-Pressure & Temperature Rating: Operates at up to 4000 PSI and 250°F
-
Nozzle Connections: Inlet thread ⅜” NPTF, nozzle ports 4x 1/8" NPTF
-
High-Speed Performance: Rotational speed up to 2000 RPM
-
Chemical Compatibility: Suitable for pH 3–12 cleaning agents
- Triple Bearing System: Provides smooth operation and extended lifespan
Included
Wheelblaster Head: No
Stand: No
Swivel: DYF
Rotor arm: 16"/10"
Specs
Material Type: Stainless steel
Pressure: 4000 PSI
Temperature: 250°F
RPM: up to 2000
Thread In: ⅜” NPTF
Throughput medium: ph 3-12
Weight: 15.8 lbs
The Mosmatic Stationary Undercarriage Cleaner TUWs – 80.640 is a heavy-duty, industrial-grade solution for permanent vehicle wash installations, including fixed ramp-over and sub-floor wash systems. Constructed with high-quality stainless steel plates and boxes, this unit features quad bearing swivels and precision-welded, balanced rotor arms for consistent, vibration-free operation.
Its high-lift wash design effectively removes heavy debris while safely cleaning the vehicle’s undercarriage without causing damage. Designed for high-volume applications, the TUWs 80.640 operates at pressures up to 4000 PSI, temperatures up to 250°F, and is compatible with cleaning agents in the pH 3–12 range. The system includes a modular design and compact footprint, and it must be equipped with 4 EG-style nozzles (not included), specified based on your pump setup.
Note: Always verify local wastewater runoff regulations before installation.
Applications
-
Permanent undercarriage cleaning systems in wash bays
-
Fleet maintenance and commercial vehicle facilities
-
High-volume car wash operations
-
Ramp-over or in-ground wash platforms
-
Heavy-duty wash stations requiring high pressure and flow
Features
-
High-Lift Design: Removes heavy dirt without damaging vehicle underbodies
-
Material: Industrial-grade stainless steel for durability and corrosion resistance
-
Quad Bearing Swivels: Smooth rotation and long service life
-
Balanced Rotor Arms: Welded for consistent cleaning performance
-
Modular & Compact: 29.5" x 11.8" x 10.8" body for easy integration
-
Stabilizer Nozzles: For steady spray and cleaning precision
-
Water Connection: 3/4" NPTF inlet, 2" water drain
-
Performance Specs: Up to 4000 PSI, 250°F, 2000 RPM
-
Cleaning Surface:
-
4" ground clearance = 13" surface
-
8" ground clearance = 16" surface
-
12" ground clearance = 18" surface
-
-
Chemical Compatibility: pH 3–12 cleaning media
Included
Swivels : 2x DYT
Rotor arms : 8"/10"
Stabilizer nozzles : 4x 14.901
Specs
Material Type: Stainless steel
Pressure: 4000 PSI
Temperature: 250°F
RPM: 2000 RPM
Thread In (Water connection for ramp) : 3/4" NPTF
Length: 29.5"
Width: 11.8"
Height: 10.8"
Throughput medium: ph 3-12
Weight: 70.5 lbs
The Mosmatic Wall Boom WAE (68.589) is a high-reach, wall-mounted boom engineered for use in outdoor wash bays, fleet cleaning stations, and industrial environments where ceiling-mounted options are not feasible. With a length of 9 ft 10 in, this boom provides superior reach and 180° smooth rotation, supported by a wall-mounted return-to-rest bracket that keeps the boom neatly in place when not in use.
This model includes a heavy-duty insulated high-pressure (HP) hose and supports a throughput medium of water, oil, and air with a pH range of 3–12. Rated for up to 4000 PSI and 250°F, it is built for rigorous cleaning tasks in demanding environments. Featuring 3/8" NPTF inlets (top and side) and a 3/8" outlet, the WAE boom is easy to install and designed for eco-conscious, industrial-grade performance.
Applications
-
Outdoor and self-service car wash bays
-
Fleet and truck wash stations
-
Agricultural and industrial equipment cleaning
-
Washdown zones in manufacturing and food processing
-
Facilities without ceiling mounting options
Key Features
-
9 ft 10 in wall-mounted boom for maximum operational reach
-
180° smooth rotation with return-to-rest wall bracket
-
Includes insulated high-pressure (HP) hose
-
3/8" NPTF inlet (top and side) and 3/8" outlet
-
Rated for 4000 PSI and 250°F
-
Supports water, oil, and air (pH 3–12)
-
Environmentally friendly and industrial-grade build
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
Thread In: 3/8" NPTF
Thread Out: 3/8" NPTF
Lenght: 9'10"
Throughput/medium: water, oil, air at pH 3-12
Weight: 31 lbs
The Mosmatic Wall Boom WAE (68.579) is a durable and efficient wall-mounted boom designed for outdoor wash bays, fleet cleaning stations, and industrial facilities where ceiling mounting is not possible. With an extended length of 9 feet, this boom provides exceptional range and 180° smooth rotation, allowing operators to clean with ease and precision. Its built-in wall bracket ensures the boom automatically returns to a designated resting position after use.
This model includes a heavy-duty insulated high-pressure (HP) hose and is rated for up to 4000 PSI and 250°F. It supports the use of water, oil, and air across a pH range of 3–12, offering wide compatibility with various cleaning media. With 3/8" NPTF inlets (top and side) and a 3/8" outlet, the WAE is easy to install and built for long-term, environmentally responsible operation.
Applications
-
Outdoor vehicle and fleet wash bays
-
Self-service car washes
-
Industrial equipment washdown zones
-
Agricultural and manufacturing facilities
-
Areas without ceiling mount access
Key Features
-
9 ft wall-mounted boom for extended cleaning reach
-
180° smooth rotation with auto return-to-rest bracket
-
Includes insulated high-pressure (HP) hose
-
3/8" NPTF inlets (top and side) and 3/8" outlet
-
Rated for 4000 PSI and 250°F
-
Compatible with water, oil, and air (pH 3–12)
-
Eco-friendly and industrial-grade performance
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
Thread In: 3/8" NPTF
Thread Out: 3/8" NPTF
Lenght: 9'
Throughput/medium: water, oil, air at pH 3-12
Weight: 29 lbs
The Mosmatic Wall Boom WAE (68.569) is a high-performance, wall-mounted boom designed for outdoor wash bays, fleet cleaning stations, and industrial environments where ceiling-mounted options are not feasible. With a length of 8 ft 2 in, this boom offers extended reach and 180° smooth rotation, ensuring full coverage and flexibility during cleaning tasks. The included wall bracket is engineered to return the boom to your preferred resting position automatically.
This model includes a durable insulated high-pressure (HP) hose, and is built to handle up to 4000 PSI and temperatures of 250°F. It supports water, oil, and air within a pH range of 3–12, making it ideal for multiple industrial applications. With 3/8" NPTF inlets (top and side) and a 3/8" outlet, the WAE boom delivers reliable, environmentally friendly performance for professional cleaning operations.
Applications
-
Outdoor self-service car wash bays
-
Truck and fleet vehicle wash zones
-
Washdown stations in food or chemical industries
-
Equipment and machinery cleaning facilities
-
Locations where ceiling installation is not an option
Key Features
-
8 ft 2 in wall-mounted boom for long-range coverage
-
180° smooth rotation with return-to-rest wall bracket
-
Includes insulated high-pressure (HP) hose
-
3/8" NPTF inlet (top and side) and 3/8" outlet
-
Rated for 4000 PSI and 250°F
-
Compatible with water, oil, and air (pH 3–12)
-
Environmentally friendly, robust industrial construction
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
Thread In: 3/8" NPTF
Thread Out: 3/8" NPTF
Length: 8'2"
Throughput/medium: water, oil, air at pH 3-12
Weight: 27 lbs
The Mosmatic Wall Boom WAE (68.559) is a heavy-duty, wall-mounted boom designed for outdoor wash bays, fleet cleaning stations, and industrial environments where ceiling mounting is not an option. With an extended reach of 7 ft 5 in, this boom offers 180° smooth rotation and features a return-to-rest wall bracket, keeping the boom secure and ready for the next use.
Engineered for demanding conditions, this model includes an insulated high-pressure (HP) hose for user safety and system durability. It supports water, oil, and air with a pH range of 3–12, and handles up to 4000 PSI and 250°F. Designed with 3/8" NPTF inlets (top and side) and a 3/8" outlet, the WAE boom provides flexible installation and is an eco-conscious, high-performance solution for commercial wash setups.
Applications
-
Outdoor self-service car wash bays
-
Truck and fleet vehicle wash areas
-
Equipment cleaning in industrial or agricultural facilities
-
Washdown zones with limited ceiling access
-
Food processing and chemical wash stations
Key Features
-
7 ft 5 in wall-mounted boom for extended operating range
-
180° smooth rotation with return-to-rest wall bracket
-
Comes with insulated high-pressure (HP) hose
-
3/8" NPTF top and side inlets and 3/8" outlet
-
Rated for 4000 PSI and 250°F
-
Supports water, oil, and air (pH 3–12)
-
Environmentally friendly, industrial-grade design
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
Thread In: 3/8" NPTF
Thread Out: 3/8" NPTF
Length: 7'5"
Throughput/medium: water, oil, air at pH 3-12
Weight: 26 lbs
The Mosmatic Wall Boom WAE (68.549) is a professional-grade, wall-mounted boom built for use in outdoor wash bays, truck and fleet cleaning stations, and industrial environments where ceiling-mounted options are not feasible. With a length of 6 ft 9 in, this boom provides extended reach and 180° smooth rotation, supported by a return-to-rest wall bracket that keeps the boom securely in place when not in use.
Equipped with an insulated high-pressure (HP) hose, this boom ensures safety and efficiency in high-pressure applications. Rated for up to 4000 PSI and 250°F, it supports water, oil, and air within a pH range of 3–12. Designed with 3/8" NPTF inlets (top and side) and a 3/8" outlet, the WAE boom is environmentally friendly and ready for immediate, high-volume use.
Applications
-
Self-service and commercial car wash bays
-
Outdoor truck and fleet wash areas
-
Equipment cleaning in industrial zones
-
Washdown areas with limited ceiling access
-
Food-grade and chemical wash stations
Key Features
-
6 ft 9 in wall-mounted boom for extended coverage
-
180° smooth rotation with return-to-rest bracket
-
Includes insulated high-pressure (HP) hose
-
3/8" NPTF inlets (top and side) and 3/8" outlet
-
Rated for 4000 PSI and 250°F
-
Handles water, oil, and air (pH 3–12)
-
Environmentally friendly, industrial-grade performance
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
Thread In: 3/8" NPTF
Thread Out: 3/8" NPTF
Length: 6'9"
Throughput/medium: water, oil, air at pH 3-12
Weight: 25 lbs
The Mosmatic Wall Boom WAE (68.539) is a heavy-duty wall-mounted boom engineered for maximum flexibility in outdoor wash bays, industrial cleaning stations, and commercial wash environments where ceiling-mounted systems aren’t practical. Measuring 6 ft 3 in in length, this boom offers a 180° smooth rotation and includes a return-to-rest wall bracket for consistent storage positioning.
Built to perform under pressure, the WAE model includes an insulated high-pressure (HP) hose and is rated for up to 4000 PSI and 250°F. It supports water, oil, and air with a pH range of 3–12. Designed for long-lasting reliability, it features 3/8" NPTF inlets (top and side) and a 3/8" outlet, making installation simple and adaptable. This boom is an eco-conscious, ready-to-use solution for high-volume cleaning applications.
Applications
-
Self-service and automated car wash bays
-
Truck and fleet washing stations
-
Outdoor industrial washdown areas
-
Food processing and manufacturing environments
-
Commercial cleaning setups with limited ceiling access
Key Features
-
6 ft 3 in wall-mounted boom with extended reach
-
180° smooth rotation and return-to-rest wall bracket
-
Includes insulated high-pressure (HP) hose
-
3/8" NPTF inlets (top and side) and 3/8" outlet
-
Rated for 4000 PSI and 250°F
-
Compatible with water, oil, and air (pH 3–12)
-
Environmentally friendly and built for industrial use
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
Thread In: 3/8" NPTF
Thread Out: 3/8" NPTF
Lenght: 6'3"
Throughput/medium: water, oil, air at pH 3-12
Weight: 24 lbs
The Mosmatic Ceiling Boom with LED Lighting DDPbl (67.659) is a cutting-edge dual-arm solution built to elevate the performance and visual appeal of self-service car wash bays. Featuring boom lengths of 7 ft 6 in and 8 ft 2 in, this advanced unit integrates LED lighting synchronized with the wash cycle, helping guide users while improving bay safety and aesthetics.
Designed for heavy-duty use, this boom supports up to 4000 PSI and temperatures of 250°F. It features 3/8" NPTF inlets (top and side) and a 3/8" outlet, and is compatible with water, oil, and air at a pH range of 3–12. Its lighting system includes 30 LEDs per 39 inches, delivering 120 lx brightness in a 24V IP66-rated waterproof enclosure. For systems using both high and low pressure, Mosmatic recommends connecting low pressure to the upper boom for ideal flow control.
With a sleek look, energy-efficient lighting, and precision-engineered durability, this LED boom is an ideal upgrade for any modern car wash. Installation must be performed by a certified electrician.
Applications
-
Self-service car wash bays
-
Wash programs with dual-pressure configurations
-
Visual wash cycle indication systems
-
Lighting and safety enhancements for wash facilities
Key Features
-
Dual-boom configuration: 7 ft 6 in and 8 ft 2 in
-
Synchronized LED lighting, 30 LEDs per 39"
-
120 lx light intensity, 24V operation, IP66 waterproof rating
-
3/8" NPTF top and side inlets + 3/8" outlet
-
Rated for 4000 PSI and 250°F
-
Compatible with water, oil, and air (pH 3–12)
-
Recommended: connect low pressure to upper boom
-
Eco-conscious design
-
Certified electrician installation required
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
Thread In: 3/8" NPTF
Thread Out: 3/8" NPTF
Lenght 1: 7'6"
Lenght 2: 8'2"
Throughput/medium: water, oil, air at pH 3-12
Operating voltage: 24V
Light intensity: 120 lx
Amount: 30 x LED/39"
IP Code: IP66
Weight: 46.5 lbs
Showing 270/372
Cleaning News
Cleaning News
Cleaning News