High-Reach Interior Cleaning
High Reach Interior Cleaning equipment designed to help professionals safely clean elevated areas without lifts or ladders. This collection focuses on tools that remove dust, debris, and buildup from high ceilings, pipes, beams, rafters, vents, and other hard-to-reach indoor surfaces, improving both safety and efficiency in commercial and industrial environments.
As part of comprehensive high reach cleaning, this category includes powerful high reach vacuums engineered to capture fine particles at significant heights, specialized systems for managing combustible dust in facilities where safety and compliance are critical, and lightweight, durable high reach poles that extend your cleaning capability without the need for ladders or lifts. To enhance versatility, the collection also features essential vac accessories such as brushes, nozzles, filters, and adaptors that make it easier to tackle a variety of elevated surfaces and cleaning challenges.
This collection is ideal for facility managers, industrial cleaning teams, janitorial professionals, and maintenance crews who need to maintain clean, safe indoor environments while minimizing risk and downtime. With equipment designed for height, precision, and safety, these tools help meet regulatory standards and keep interiors free of hazardous dust and debris.
Use this high reach interior cleaning equipment as part of a complete indoor maintenance program to improve air quality, reduce safety hazards, and deliver consistent, professional-grade results. With the right vacuums, poles, and accessories, you can clean elevated surfaces efficiently and confidently in any facility.
Sort by:
Compatible with the 1.75" (44mm) SkyVac® Suction Poles, the set contains two angled carbon fiber tool holders for easy access in hard to reach locations, such as overhead beams. It's complimented by a variety of brush options, ideal for large areas and tight crevices. The perfect high-reach cleaning set.
These brushes are an essential part of your kit for high level internal cleaning jobs. They are designed to reach the small corner, tight spaces, and hard to reach areas to provide an effective clean.
Two carbon fiber tool holders are included to hold your end tools at the ideal angle for cleaning difficult to reach places. The brushes are designed for different tasks one might encounter such as radiator dusting, flat surface cleaning, and general every day cleaning jobs.
The Soft Round Brush is perfect for many daily tasks, and can easily clean those smaller spaces. The Pivot Black Large Brush is for cleaning at all angles, making your cleaning more customizable. The Straight White Large Brush is ideal for narrow spaces, such as in between bars or beams.
Key Features:
- Compatible with 1.75" (44mm) SkyVac® Push Fit Suction Poles
- Designed for handling a range of daily high level, internal cleaning tasks
- Complete with two tool holders at 65° and 155°
Included Items
- 155° Carbon Fiber Tool Holder
- 65° Carbon Fiber Tool Holder
- Small Round Brush - Outer Diameter 3"
- Crevice tool
- Pivot Black Brush - Bristles are 5" Length, 2" Width in the middle and tapers down on each end to create a diamond shape. Also Pivots to a 90° Angle
- Straight White Brush
Specifications
- Diameter: 1.75" (44mm)
- Material: carbon fiber tool holders
This is the complete replacement for the blow port assembly on a SkyVac Mighty Atom.
Items included in this purchase are the full assembly including the front plate, back plate, and screws.
This is the complete replacement for the blow port assembly on a SkyVac Sonic Atom.
- Blow Port Complete includes full assembly including the front plate, back plate, gasket and screws.
- Front Port Only includes only the front plate port, no screws included
The SkyVac® Telescopic Carry Bag is a long blue logo bag for carrying SkyVac®️ telescopic poles. Side pockets with zippers hold cleaning attachments.
Included Items
1 x SkyVac® Carry Bag for Accessories and Poles
SkyVac® offers a wide variety of end attachments for gutter cleaning. Here you can order single individual attachments and accessories.
Round brush specifically for Mighty Atom Push Fit.
A replacement drum can be purchased for your SkyVac® Sonic, 85, 78, or Interceptor.
Please choose from the drop down menu.
- SkyVac® Sonic drum's chassis includes wheel and drain hose
- SkyVac® 78 drum's chassis intake is centered specifically to hold large dust bags for internal cleaning.
- SkyVac® 85 drum's chassis has an off-centered, cyclonic style intake to create airflow vortex. It's available in two styles:
- Standard Drum
- Drum with Drainage Hose
- SkyVac® Interceptor drum is slightly larger than the SkyVac 85 and off-centered to create an airflow vortex
Please note: Full unit pictured; however, this price is for the stainless steel drum only. Vacuum and carts sold separately.
The SkyVac® FloodVac is a cutting-edge flood water extraction and restoration system engineered for professionals in flood recovery, water damage repair, and disaster restoration. Designed to handle the toughest flood cleanup tasks, this dual-pump powerhouse delivers exceptional performance for both residential and commercial applications.
The FloodVac’s advanced dual-pump technology combines a high-capacity submersible pump (extracting up to 500 LPM from depths of 5 m / 16 ft) with an internal vacuum pump delivering an additional 180 LPM. Together, they remove up to 95% of floodwater, leaving surfaces clean and dry.
Powered by a 4.3 kW (5.8 HP) Honda engine, the FloodVac ensures reliable, fuel-efficient operation with reduced noise and vibration. Mounted on a durable steel trolley with all-terrain braking wheels, it offers superior mobility and rapid deployment in any environment.
For added convenience, every unit includes the SkyVac® Floor Tool Kit with a 38 mm industrial hose, long tool holder, and three interchangeable brush heads—ideal for removing standing water from flat surfaces.
Applications:
-
Industrial & Commercial Water Extraction
-
Flood Cleanup & Restoration
-
Emergency & Disaster Recovery
Key Features:
-
Dual-pump system for deep and surface water removal
-
Extracts from depths up to 5 m (16 ft)
-
500 LPM submersible + 180 LPM internal vacuum pump
-
Powerful 4.3 kW Honda engine with low fuel use
-
Quiet, low-vibration operation meeting environmental standards
-
Fully mobile steel frame with all-terrain wheels
-
Includes complete SkyVac® Floor Tool Kit
The SkyVac® FloodVac—Professional power, performance, and reliability for fast, effective flood recovery.
Video
Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.
Included
- 4 x All-terrain wheels with brakes
- 1 x 4.3kW engine
- 1 x Flat hose (25m)
- 1 x 38mm hose (8m)
- 1 x Drain hose
- 1 x skyVac wet and dry tool kit
- Easy fit connectors
- 1 x submersible pump and basket
Floor Tool Kit
- 50mm Drum -38mm Hose Cuff
- 38mm Diameter Flexi Hose x 3 Meters
- 2 x aluminum/plastic tubes
- 1 x plastic bend end tool holder
- 1 x wet floor brush (40.5cm)
- 1 x dry floor brush (40.5cm)
- 1 x carpet floor brush (40.5cm)
Specifications
Motor Wattage - 1.9 horsepower (HP) / 1400 W (max)
Engine Power - 5.8 HP
Water Lift - 100 inches
Air Flow Movement - 148 CFM / 4200 L/min
Container Capacity - 20.6 gallons / 78 liters
Weight (with pump) - 288.8 lbs / 131 kg
Weight (without pump) - 233.7 lbs / 106 kg
Decibel Level - 107 dB
Dimensions (with basket) - 51.2" L × 51.2" W × 24.4" H / 130 × 130 × 62 cm
Dimensions (without basket) - 39.4" L × 51.2" W × 24.4" H / 100 × 130 × 62 cm
Floor Tool Kit
- 50mm Drum -38mm Hose Cuff
- 38mm Diameter Flexi Hose x 3 Meters
- 2 x aluminum/plastic tubes
- 1 x plastic bend end tool holder
- 1 x wet floor brush (40.5cm)
- 1 x dry floor brush (40.5cm)
- 1 x carpet floor brush (40.5cm)
SkyVac Floor Tool Kit:
- Brush Head Width: 405mm
- Brush Head Opening Diameter: 44mm
- Hose: 38mm Diameter Flexi Hose x 3 Meters
- Inlet Cuff: 50mm Drum - 38mm Hose
External Pump:
- 12.2m max head
- 17.7 CFM / 500 LPM max flow
- 230 Volt 1.5 kW electric motor
- Auto stop/start float switch
- AISI 304 & cast iron construction
- 50mm max suspended solids
- 5m max immersion
- Oil bath motor & seals
- Class F insulation, IP68
- For dirty water up to 50°C
- 2" BSSPF outlet
- 10m power cable
Internal Pump:
- Flow rate up to 180 l/min (10.8 m3/h)
- Picks up solids up to 25mm
- Suction down to zero above ground level
- Continuous vacuum
The pumps are complete with:
- Power Cable
- Float Switch
Bacuum Replacement Battery Only
18V 5Ah for BoostiX 36V UK dry vacuum, 6l, 300W
Charger sold separately.
Bacuum Replacement HEPA fleece filter bag 13 BoostiX
PLEASE NOTE: This is a bundled SKU. All these items can also be ordered a la carte.
This bundle combines our most popularly ordered high dusting vacuum system designed for professionals.
This bundle contains:
-
SkyVac® Internal 30 System Kit
- Choice of 8 Elevate Clamped Carbon Fiber Poles (40 ft reach) or one Telescopic Carbon Fiber Pole (30 ft reach)
- Pole Carry Bag
- Filter
- Anti-Static Hose
- Hose connectors
- Carbon fiber tool holders (two angled styles)
- Small Pipe Brush, Small Sidewinder Brush, Small Round Brush, Crevice Tool Brush, Finger Brush, Angled Black Bristle Brush
- 5 Starter Dust Bags
- Additional 5 Dust Bags
- Spare Filter
- 90° Tool Holder
-
Free Training Days at our NC location
-
Free Access to Marketing Materials
Efficient and sturdy, the SkyVac® Internal 30 high-level vacuuming system includes a built-in trolley and fitted basket. This exceptional system can easily remove dust and debris from various internal spaces, reaching up to 40ft while keeping the operator safely on the ground. It also comes with a variety of accessories and the SkyVac® internal suction pole set.
With a motor wattage of 1300 watts and an air flow movement of 134 CFM (3800 LPM), the SkyVac® 30 high level vacuuming system is the perfect system for rapidly removing dust and debris from out of reach internal areas in environments such as shopping centers, large offices, universities, hospitals, libraries and schools.
Key Features
- Commercial powered vacuum motor
- 40 ft cleaning reach
- Compact design
- Optional friction fit pole set or Telescopic pole
- Easy-to-handle pole and accessory carrying bag
- Convenient accessory and hose basket
NEW Elevate 44MM Clamped Suction Poles.
The new skyVac Elevate Poles are a budget-friendly upgrade for your vacuum. Providing maximum stability and control when carrying out high-level cleaning, the Elevate Poles are quick to assemble and dismantle!
Telescopic Suction Poles:
Our unique skyVac telescopic suction poles allow you to accurately tailor your working height. Constructed of premium light weight carbon fiber, poles are quick and easy to assemble to height as well as rigid for optimal control at height. Simply extend the segments to height, and lock in place using the secure clamps.
Disclaimer:
Clean Direct / SkyVac® high-reach poles are not designed or certified for use in combustible dust environments. Use of this equipment in such conditions may result in serious injury, property damage, or other hazards.
Please note that carbon fiber poles are electrically conductive. Operators should exercise extreme caution when using this product around any electrical source, including overhead power lines, outlets, equipment, or during outdoor use in storms or wet conditions.
The operator assumes all risks associated with using this product outside its intended purpose and operating guidelines.
Video
Video of the SkyVac®️ 30 being used with the new Internal Telescoping Carbon Fiber Pole:
Disclaimer: This video is the property of its original creator or manufacturer and is provided here for informational purposes only. Clean Direct does not claim any rights to this content and is not responsible for its accuracy or representations.
Included
Internal 30 Kit:
- Commercial vacuum, canister and cart
- 8 Carbon fiber poles - 5 ft (1.5 meters) each - 11 ounces each (310 grams) or optional Telescopic Pole with 30 /25 / 20 ft reach
- Flexi pick up hose 20 ft (6 meters), 1.5 inches diameter (3.8 centimeters)
- 6 Assorted internal brushes designed for various cleaning needs
- 2 Carbon fiber tool holders
- 3 Dust Bags
- Carrying bag
- Hose bag (as of 10/14/24)
- Pole and hose cuff
Specifications
Machine:
- Air Flow: 134 CFM (3800 liters)
- Motor wattage: 1300w
- Noise: 60 decibels
- Container capacity: Approximately 10 Gallons (37 Liters)
- Mains connection: 120 volt/ 15 amperes
- Height: 31.5 inches (80 cm)
- Weight: approximately 31 lbs (14 kg)
- Power Cable Length: approximately 26 feet (8 Meters)
Telescopic Poles (1 Pole, Carry Bag)
- Construction: High Modulus Carbon Fiber
- Collapsed Height: 5.57 Ft (1M 75cm)
- Sections:
- 20 feet pole - 2 sections
- 25 feet pole - 4 sections
- 30 feet pole - 4 sections + extension
- Extension pole:
- (5 Ft extension that slots into the end of pole)
- Carbon fiber / fiber glass hybrid
- Diameter - 1.75 in
- Weight - 11 oz
- Extension pole:
- Diameter:
- Smaller size: 1 lb 14 oz
- Larger size: 2 lb 13 oz
- Weight:
- Smaller size: 1 lb 14 oz
- Larger size: 2 lb 13 oz
Elevate poles (8 Poles, Carry Bag):
- Length: 5ft (1.5m)
- Diameter: 1.73" (44mm)
- Weight: 11.6oz (330g)
- Material: Hybrid Carbon Fiber
The IPC Eagle pipe brush is for internal vacuuming of pipes and ducting.
It helps clean curved, high-level surfaces with a compatible vacuum setup.
Choose the small or large brush by pipe size.
Key Features
- Cleans curved surfaces with a shaped brush profile.
- Reaches internal dust with a vacuum cleaning setup.
- Fits common duct sizes with 4 in and 8 in options.
- Supports high-level cleaning when used with compatible poles.
- Reduces manual dusting on hard-to-reach pipe runs.
Specs
- Brand: IPC Eagle
- Product type: Pipe brush for internal vacuuming
- Size option: Small
- Small brush fit: 4 in, or 100 mm, ducting and piping
- Size option: Large
- Large brush fit: 8 in, or 200 mm, ducting and piping
- Tool holder: Sold separately
IPC Eagle 70° Carbon Fiber Tool Connector helps improve access during high-level internal cleaning. The 70° angle supports steeper reach into tight, elevated, or hard-to-access areas. It fits IPC Eagle internal cleaning tools and is ideal for detailed overhead cleaning tasks.
Showing 57/57
Cleaning News
Cleaning News
Cleaning News