The Mosmatic 58.163 DYF is a high-pressure brass swivel featuring a 3/8" NPTF inlet and a G3/8" BSPP (male) outlet—making it ideal for connecting NPT-threaded lines to BSP-threaded tools or accessories.

This 360° maintenance-free swivel supports up to 4000 psi and includes a carbide seal, sealed bearing system, and weep holes for early detection of seal wear. Its nickel-plated brass housing ensures excellent corrosion resistance in demanding cleaning environments.

Applications

• Pressure washers with BSPP connections

• Surface cleaners and wash booms

• Car wash arms and rotating nozzles

• Industrial fluid systems needing NPT-to-G thread

Features

• 360° full rotation

• Carbide seal with weep hole alert

• Nickel-plated brass body for corrosion resistance

• Maintenance-free, sealed bearing system

• Rated up to 4000 psi

• Ideal for NPT-to-BSPP transitions

Specs

Product Type: High-pressure swivel – DYF
Part Number: 58.163
Pressure: 4000 psi
Temperature: 250°F
RPM: max. 2,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: Carbide
Throughput / Medium: pH 3–12 / filtered 10 microns / compressed air (290 psi)
Thread In (G1): 3/8" NPTF
Thread Out (G2): G3/8" M
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Diameter (D): 2.36"
Length 1 (L1): 1.49"
Length 2 (L2): 0.39"
Weight: 13.2 oz

The Mosmatic DGE Swivel - 34.854 is a high-pressure, high-flow swivel designed for industrial and food service applications where both thrust and radial forces must be managed with precision. Constructed from nickel-plated brass with a stainless steel interior, this swivel offers excellent corrosion resistance and durability in demanding environments. The swivel includes a 1x thrust ball bearing, ensuring dependable performance, ideal for fluid transfer systems requiring strength, efficiency, and sanitation compliance.

Applications:

• Industrial high-pressure fluid and washdown systems

• Food and beverage processing equipment

• Chemical handling and sanitation systems

• Low-speed, high-pressure rotary unions

Key Features:

• Nickel-plated brass body with stainless steel internal components

• With 1x thrust ball bearing

• Designed to withstand both thrust and radial forces

• High-flow capacity with low maintenance requirements

• Corrosion-resistant for industrial and sanitary use

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM

• Nominal Width (NW): 3/4"

• Diameter: 1.97"

• Overall Length: 3.46"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF

Thread Out: G2 3/4"NPTM

Nominal Width (NW): 3/4"

Wrench Size 1 (SW1): 1.06

Wrench Size 2 (SW2): 1.57

Diameter (D): 1.97"

Length 1 (L1) (overall length): 3.46"

Length 2 (L2): 2.38

Length 3 (L3): 0.63

Weight: 27.8oz

The Mosmatic 58.463 DYF 90° Swivel is a high-pressure elbow-style rotary union designed for applications requiring NPT-to-BSPP thread transition at a 90° angle. With a 3/8" NPTF (female) inlet and a G3/8" BSPP (male) outlet, it’s ideal for international systems or equipment with mixed thread types.

This swivel features nickel-plated brass construction, a carbide seal, and sealed stainless steel bearings, offering 360° rotation and maintenance-free operation up to 4000 psi. Weep holes allow for early seal failure detection.

Applications

• Pressure washers with NPT-to-BSP connections

• Compact industrial washdown systems

• Surface cleaners and spray nozzles

• International or mixed-thread systems

• Equipment requiring 90° directional output

Features

• NPT to BSPP transition swivel

• 90° elbow with 360° rotation

• Brass body, stainless steel internals

• Carbide seal with weep hole indicator

• Maintenance-free design

• Supports high-pressure setups up to 4000 psi

Specs

Product Type: High-pressure elbow swivel – DYF 90°
Part Number: 58.463
Pressure: 4000 psi
Temperature: 250°F
RPM: max. 2,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: Carbide
Throughput / Medium: pH 3–12 / filtered 10 microns / compressed air (290 psi)
Thread In (G1): 3/8" NPTF
Thread Out (G2): G3/8" M
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Length 1 (L1): 1.49"
Length 2 (L2): 0.39"
Diameter (D): 2.36"
Weight: 16.2 oz

The Mosmatic 58.158 DYFI is a stainless steel rotary swivel designed for high-pressure fluid systems requiring 3/8" NPTF inlet and 3/8" NPTM outlet connections. With its corrosion-resistant INOX construction, it's ideal for chemically aggressive or food-grade environments.

The swivel features sealed bearings, a carbide seal, and weep hole design, offering 360° rotation and maintenance-free performance under 4000 psi.

Applications

• High-pressure industrial and food-grade cleaning

• Chemical and marine environments

• Washdown and sanitizing systems

• Pressure washer booms, reels, and arms

Features

• Stainless steel housing and internal components

• Maintenance-free, sealed design

• Carbide seal with weep hole failure indication

• Straight connection: 3/8" NPTF to 3/8" NPTM

• Full 360° rotation under load

 Specs

Product Type: High-pressure swivel – DYFI
Part Number: 58.158
Pressure: 4000 psi
Temperature: 250°F
RPM: max. 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Carbide
Throughput / Medium: pH 3–12 / filtered 10 microns / compressed air (290 psi)
Thread In (G1): 3/8" NPTF
Thread Out (G2): 3/8" NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Diameter (D): 2.36"
Length 1 (L1): 1.49"
Length 2 (L2): 0.47"
Weight: 10.4 oz

The Mosmatic 39.905 DXTI Swivel is a precision-engineered stainless steel swivel designed for high-RPM, self-rotating cleaning systems that require exceptional reliability and durability. Built to perform in parts washers, tire cleaners, and HP cleaning technology, this swivel delivers smooth rotation with very low torque, making it ideal for continuous high-speed operation.

A quadruple bearing system - with 2 radial ball bearings and 2 thrust ball bearings - ensures long-lasting, stable performance. The ceramic seal system offers excellent resistance to heat and chemicals. For added functionality, a side weep connection allows fluid capture and alerts for seal failure, helping maintain system integrity and reduce downtime.

Rated for 2500 PSI, 2000 RPM, and temperatures up to 250°F, this swivel is a reliable solution for industrial environments demanding high-flow and precision.

Applications

• High-speed parts washing equipment

• Self-rotating tire cleaning systems

• HP industrial and automotive cleaning tools

• Rotary spray nozzles and cleaning heads

• Robotic or automated pressure washing systems

Key Features

• Thread In: 1" NPT Female

• Thread Out: G1/2" Male

• Material: All stainless steel construction

• Seal Type: Durable ceramic seal for heat and chemical resistance

• Bearing System: Quadruple bearings (2 radial + 2 thrust)

• Low Torque Operation: Optimized for high-speed self-rotation

• Weep Capture Port: Integrated side connection for seal failure monitoring

• Max Pressure: 2500 PSI

• Max Temperature: 250°F

• Max RPM: 2000

• Compact and Rugged: Ideal for continuous-use cleaning operations

Specs

Pressure: 2500 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: 1" NPTF
Thread Out: G1/2" M
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 0.84"
Length 1 (L1): 3.44"
Length 2 (L2): 4.92"
Length 3 (L3): 0.48"
Diameter (D1): 2.40"
Diameter (D2): 1.12"
TK: 1.97"
Weight: 55.9 oz

The Mosmatic DGE Swivel - 34.753 is a precision-engineered stainless steel swivel built for high-pressure, high-flow applications in demanding environments. Designed to manage thrust and radial forces, this swivel features 1x thrust ball bearing and 2x sliding bearings for long-lasting, stable performance. Ideal for pharmaceutical, food processing, industrial cleaning, and automatic car wash systems, it offers a corrosion-resistant design, a 5000 PSI pressure rating, and heat resistance up to 250°F.

Applications:

• Pharmaceutical manufacturing and clean-in-place systems

• Food and beverage processing and sanitation lines

• Automatic car wash sprayers and rinsing systems

• Industrial washdown and fluid transfer systems

Key Features:

• Durable stainless steel body for corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• High-flow design supports efficient liquid transfer

• Withstands both thrust and radial loads

• Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTM

• Nominal Width (NW): 1/2"

• Diameter: 1.65"

• Overall Length: 2.17"

• Max Pressure: 5000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 5000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/2"NPTF

Thread Out: G2 1/2"NPTM

Nominal Width (NW): 1/2"

Wrench Size 1 (SW1): 0.87

Wrench Size 2 (SW2): 1.38

Diameter (D1): 1.65

Length 1 (L1) (overall length): 2.17"

Length 2 (L2): 2.17

Length 3 (L3): 0.59

Weight: 18.9oz

The Mosmatic WDRS Swivel 41.920 is a high-performance stainless steel swivel designed for high-pressure hose reels, automatic car wash systems, and industrial high-flow applications. Engineered for reliable rotation and long service life, this swivel provides exceptional performance in demanding environments where durability and leak-free operation are essential.

Featuring a robust dual bearing system with 2x radial ball bearings and an NBR O-ring seal, the WDRS 41.920 ensures smooth, stable rotation with effective leak prevention. Its stainless steel construction delivers excellent corrosion resistance, making it suitable for water, chemicals, and compressed air systems.

This swivel offers a Thread In of 1/2” NPTF and a Thread Out of 1/2” NPTM, with a nominal width of 1/2”, overall diameter of 1.77”, and length of 6.10”. Rated for pressures up to 3000 PSI, the unit operates at speeds up to 150 RPM and temperatures ranging from 40°F to 180°F. Compatible with media in the pH range of 3–12 and 10-micron filtered compressed air up to 290 PSI.

Applications

• Automatic car wash systems

• Industrial high-pressure hose reels

• High-flow water and chemical transfer lines

• Pneumatic and compressed air tool connections

• Rotary spray equipment and surface cleaners

• Commercial cleaning and spraying systems

Features

• Stainless steel construction for superior corrosion resistance and durability

• Dual bearing system with 2x radial ball bearings for smooth, stable rotation

• NBR O-ring seal for reliable leak protection and extended service life

• Thread In: 1/2” NPTF | Thread Out: 1/2” NPTM

• Nominal Width (NW): 1/2”

• Max Pressure: 3000 PSI

• Max Temperature Range: 40°F to 180°F

• Max RPM: 150

• Overall Diameter: 1.77” | Overall Length: 6.10” | Height: 1.57”

• Compatible with pH 3–12 media and 10-micron filtered compressed air (290 PSI)

Specs 

Pressure: 3000 psi

Temperature: 40°F - 180°F

RPM: max 150

Material Type:  Stainless steel

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 1/2" NPTF

Thread Out: G2 1/2" NPTM

Nominal Width (NW): 1/2"

Wrench Size 1 (SW1): 1.06

Height (H): 1.57

Length 1 (L1) (overall length) : 6.10

Length 2 (L2): 2.76

Length 3 (L3): 0.60

Length 4 (L4): 3.31

Diameter (D) (overall diameter): 1.77

Weight: 33 oz

The Mosmatic 39.907 DXTI Swivel is a high-speed, high-performance stainless steel swivel built for self-rotating cleaning systems where low torque, high RPMs, and reliability are essential. Designed for parts washers, tire cleaners, and high-pressure (HP) cleaning technology, this swivel combines precision engineering with rugged durability.

This model features a quadruple bearing system - 2 radial and 2 thrust ball bearings - for enhanced stability under rotation. Its ceramic seal system resists wear, heat, and chemicals, making it ideal for demanding industrial use. A side weep connection allows for easy monitoring and capture of fluid discharge, protecting surrounding components and systems.

With support for 2500 PSI, 2000 RPM, and 250°F, the 39.907 DXTI swivel is built to deliver long-lasting, smooth rotation in even the most intensive cleaning applications.

Applications

• Self-rotating parts washer systems

• Tire cleaning equipment

• High-pressure (HP) industrial cleaning systems

• Spray arms and rotating nozzles

• Robotic or automated cleaning tools requiring high speed and low torque

Key Features

• Thread In: 3/4" NPT Female

• Thread Out: G1/2" Male

• Material: Stainless steel construction

• Seal Type: High-performance ceramic seal for heat and chemical resistance

• Quadruple Bearing System: 2 radial + 2 thrust stainless steel ball bearings

• Low Torque Design: Ideal for high-speed rotary cleaning

• Side Weep Connection: Allows fluid capture and seal failure monitoring

• Max Pressure: 2500 PSI

• Max RPM: 2000

• Max Temperature: 250°F

• Built for Demanding Use: Engineered for heavy-duty and continuous operation

Specs

Pressure: 2500 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: 3/4" NPTF
Thread Out: G1/2" M
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 0.84"
Length 1 (L1): 3.44"
Length 2 (L2): 4.92"
Length 3 (L3): 0.48"
Diameter (D1): 2.40"
Diameter (D2): 1.12"
TK: 1.97"
Weight: 57.9 oz

The Mosmatic DGE Swivel - 34.875 is a compact, high-flow swivel engineered to handle thrust and radial forces in high-pressure environments. Built with a nickel-plated brass housing and a stainless steel interior, it delivers superior corrosion resistance and durability in industrial and food-grade settings. Featuring a one thrust ball bearing, ensuring dependable performance, this swivel provides smooth, low-RPM operation and long-lasting reliability. Rated for 2900 PSI and up to 250°F, it is ideal for applications requiring robust performance in tight spaces.

Applications:

• High-pressure cleaning and fluid systems

• Food and beverage sanitation and processing equipment

• Chemical transfer and washdown operations

• Industrial hose reels and rotary connections

Key Features:

• Nickel-plated brass body with stainless steel interior

• With 1x thrust ball bearing

• Engineered to manage both thrust and radial forces

• Corrosion-resistant for industrial and sanitary use

• Compact design with high-flow capability

• Thread IN: 1" NPTF | Thread OUT: 1" NPTM

• Nominal Width (NW): 1"

• Diameter: 2.36"

• Overall Length: 1.42"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTM

Nominal Width (NW): 1"

Wrench Size 1 (SW1): 1.42

Diameter (D1): 2.36"

Diameter 2 (D2): 2.83

Length 1 (L1) (overall length): 1.42"

Length 2 (L2): 2.52

Length 3 (L3): 0.71

Length 4 (L4): 1.18

Length 5 (L5): 0.83

Weight: 74.2oz

The Mosmatic DGE Swivel - 34.765 is a rugged, high-flow stainless steel swivel designed for high-pressure applications where thrust and radial forces must be managed reliably. Equipped with 1x thrust ball bearing and 2x sliding bearings, this swivel delivers stable, low-RPM rotation and long-term durability. Its corrosion-resistant stainless steel construction makes it ideal for demanding environments such as pharmaceutical processing, food and beverage sanitation, automatic car wash systems, and industrial fluid handling.

Applications:

• Food and beverage cleaning and transfer systems

• Pharmaceutical production and CIP processes

• Rotary spray arms in car wash systems

• Industrial chemical handling and washdown

Key Features:

• Corrosion-resistant stainless steel housing

• With 1x thrust ball bearing and 2 x sliding bearings

• Handles both thrust and radial loads under high pressure

• High-flow design with smooth low-RPM operation

• Thread IN: 1" NPTF | Thread OUT: 1" NPTF

• Nominal Width (NW): 1"

• Diameter: 2.35"

• Overall Length: 3.54"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTF

Nominal Width (NW): 1"

Wrench Size 1 (SW1): 1.42

Wrench Size 2 (SW2): 1.97

Diameter (D1): 2.35"

Length 1 (L1) (overall length): 3.54"

Length 2 (L2): 2.56

Weight: 44oz

The Mosmatic DGE Swivel - 34.755 is a precision-engineered stainless steel swivel built for high-pressure and high-flow applications. Designed to handle both thrust and radial forces, this swivel features 1x thrust ball bearing and 2x sliding bearings, delivering smooth, reliable rotation even in demanding conditions. Corrosion-resistant and rated for 2900 PSI, this swivel is ideal for use in pharmaceutical, food service, automatic car wash, and industrial fluid systems where hygiene, performance, and durability are essential.

Applications:

• Food and beverage sanitation systems

• Pharmaceutical processing and CIP systems

• Industrial washdown and high-pressure cleaning

• Automatic car wash rotary spray systems

Key Features:

• Heavy-duty stainless steel construction for superior corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• Handles both thrust and radial forces in low-RPM environments

• High-flow capability with consistent performance

• Thread IN: 1" NPTF | Thread OUT: 1" NPTM

• Nominal Width (NW): 1"

• Diameter: 2.35"

• Overall Length: 3.74"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTM

Nominal Width (NW): 1"

Wrench Size 1 (SW1): 1.42

Wrench Size 2 (SW2): 1.97

Diameter (D1): 2.35"

Length 1 (L1) (overall length): 3.74"

Length 2 (L2): 2.56

Length 3 (L3): 0.71

Weight: 40.3oz

The Mosmatic DGE Swivel - 34.754 is a high-performance stainless steel swivel engineered for high-pressure, high-flow operations across a variety of demanding environments. Designed to support both thrust and radial forces, this swivel features 1x thrust ball bearing and 2x sliding bearings for smooth, reliable operation. With a pressure rating of 5000 PSI and temperature resistance up to 250°F, it’s perfect for applications in pharmaceutical manufacturing, food processing, industrial cleaning, and automatic car wash systems.

Applications:

• Pharmaceutical fluid handling and CIP systems

• Food and beverage sanitation and spray lines

• Car wash sprayers and rotary connections

• Industrial washdown and chemical systems

Key Features:

• Rugged stainless steel construction for corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• High-flow capacity for demanding applications

• Supports both radial and thrust forces at low RPM

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM

• Nominal Width (NW): 3/4"

• Diameter: 1.97"

• Overall Length: 3.66"

• Max Pressure: 5000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 5000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF

Thread Out: G2 3/4"NPTM

Nominal Width (NW): 3/4"

Wrench Size 1 (SW1): 1.06

Wrench Size 2 (SW2): 1.58

Diameter (D1): 1.97"

Length 1 (L1) (overall length): 3.66"

Length 2 (L2): 2.58

Length 3 (L3): 0.63

Weight: 27.8oz

The Mosmatic DGR Swivel - 34.311 is a premium stainless steel swivel designed to withstand both radial and thrust forces in high-pressure applications. Featuring a quadruple bearing system with two radial and two thrust ball bearings, this swivel delivers smooth, reliable performance even under heavy load. It is ideal for industrial or food service use where high flow, corrosion resistance, and durability are essential. Built from high-grade stainless steel, it ensures long-term resistance to harsh environments and demanding conditions.

Applications:

• Industrial high-pressure systems

• Food and beverage processing equipment

• Sanitation and washdown systems

• Chemical and fluid transfer operations

Key Features:

• Corrosion-resistant stainless steel construction

• Quadruple bearing system: 2x radial + 2x thrust ball bearings

• High-flow design for efficient performance

• Handles both thrust and radial force loads

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM

• Nominal Width (NW): 3/4"

• Diameter: 2.17"

• Overall Length: 5"

• Max Pressure: 3000 PSI

• Max RPM: 150

• Temperature Range: 40°F to 180°F

Specs

Pressure: 3000 psi

Temperature: 40°F - 180°F

RPM: 150

Material Type: Stainless steel

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF

Thread Out: G2 3/4"NPTM

Nominal Width (NW): 3/4"

Wrench Size 1 (SW1): 1.65

Wrench Size 2 (SW2): 1.26

Diameter (D): 2.17

Length 1 (L1) (overall length): 5

Length 2 (L2): 3.66

Length 3 (L3): 0.59

Weight: 51oz

Surface cleaners, parts washer, tire cleaners, high pressure, self rotating applications

• Flange for easy installation
• Seal failure warning, through week holes
• Maintenance free
• Carbide seal systems

DYF-06 M22x1,5-M M12x1-M

Technical data

• Pressure: 4000 psi(27.5 MPa)
• Temperature: 4000 psi(27.5 MPa)
• Temperature: 250 °F (max. 2’000 rpm)
• RPM: max. 2’000 rpm)
• Body: DYF: brass, nickel plated, DYFI: Stainless steel
• Inner part: Stainless steel
• Seal: carbide
• Bearing: 2x radial ball bearings, 1x thrust ball bearing
• Throughput: pH 3-12
• Medium: filtered 10 microns, compressed air (290 psi)