Mosmatic

The Mosmatic DGK Swivel 32.543 – 90 Degrees is a compact, high-precision swivel ideal for high-pressure guns, hose connections, and hydraulic systems where smooth, tangle-free operation is critical. Constructed with a stainless steel/brass body and protected by nickel plating, this 90° swivel delivers live rotation under full pressure and long-lasting durability.

Featuring a low-torque thrust ball bearing and a dependable O-ring NBR seal system (optional upgrades: EPDM or FKM), this swivel is maintenance-free and engineered to perform consistently in demanding environments.

Applications

• High-pressure gun swivels

• Hose and hydraulic connections

• Industrial tangle-free setups

• Cleaning equipment & car washes

• Spray tools and mobile wash systems

Features

• Material: Stainless steel/brass, nickel plated

• Thread IN (G1): 1/4" NPTM

• Thread OUT (G2): 1/4" NPTF

• Design: 90-degree compact swivel

• Overall Length: 0.94"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.94"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Bearings: 1x thrust ball bearing

• Seal System: O-ring NBR (EPDM/FKM available)

• Performance: Low torque, live rotation, corrosion resistant

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTM

Thread Out: G2 1/4" NPTF

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 0.94"

Lenght 2 (L2): 0.39"

Weight: 5.6 oz

The Mosmatic DGK Swivel 32.489 – 90 Degrees is a robust, precision-engineered swivel designed for high-pressure guns, hose connections, hydraulic setups, and other tangle-free applications. Built with a nickel-plated brass body and stainless steel components, this compact elbow swivel ensures seamless, live rotation under full pressure.

Featuring a single thrust ball bearing and durable O-ring NBR sealing system (with optional EPDM or FKM variants), it’s built for maintenance-free performance, minimal torque, and long service life even in demanding environments.

Applications

• High-pressure cleaning guns

• Hydraulic hose connections

• Industrial hose swivel joints

• Ceiling booms and retractable systems

• Pressure washer and spray tool assemblies

Features

• Material: Stainless steel/brass with nickel plating

• Thread IN: 3/8" NPTM

• Thread S1: 3/8"

• Design: 90-degree compact swivel

• Overall Length: 2.10"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.94"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Bearings: 1x thrust ball bearing

• Seal System: O-ring NBR (EPDM/FKM optional)

• Performance: Low torque, maintenance-free, high durability

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTM

S1: 3/8"

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 2.10"

Lenght 2 (L2): 0.43"

Diameter 1 (D1): 0.40"

Diameter 2 (D2): 0.42"

Diameter 3 (D3): 0.54"

Weight: 6.2 oz

The Mosmatic DGK Swivel 32.482 – 90 Degrees is a high-performance swivel designed for HP-guns, hose connections, hydraulic systems, and other tangle-free applications. Engineered with nickel-plated brass and stainless steel, this swivel ensures smooth, reliable rotation at full pressure.

Featuring a single thrust ball bearing and NBR O-ring seal system (with optional EPDM or FKM), the DGK 32.482 is maintenance-free and delivers long-lasting durability in both high and low-pressure systems. Its compact 90-degree elbow design makes it ideal for space-saving setups where flexibility and freedom of movement are critical.

Applications

• High-pressure guns and cleaning systems

• Hose swivel joints and connections

• Hydraulic tools and equipment

• Tangle-free setups for industrial systems

• Ceiling booms and spray bars

Features

• Material: Nickel-plated brass and stainless steel

• Thread IN: 3/8" NPTM

• Thread S1: 5/16"

• Design: 90-degree elbow swivel

• Overall Length: 1.97"

• Nominal Width (NW): 7/32"

• Wrench Size (SW): 0.94"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Bearing: 1x thrust ball bearing

• Seal System: O-ring NBR (EPDM/FKM optional)

• Maintenance: Maintenance-free, low torque

• Performance: Seamless live rotation under pressure

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTM

S1: 5/16"

Nominal Width (NW): 7/32”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 1.97"

Lenght 2 (L2): 0.43"

Diameter 1 (D1): 0.33"

Diameter 2 (D2): 0.34"

Diameter 3 (D3): 0.44"

Weight: 5.7 oz

The Mosmatic DGK Swivel 32.481 – 90 Degrees is engineered for high-pressure spray guns, hydraulic systems, and hose applications where compact, efficient rotation is essential. Made of nickel-plated brass and stainless steel, this swivel provides live rotation under full pressure for smooth, tangle-free performance.

Built with a single thrust ball bearing and an NBR O-ring seal system (optional EPDM or FKM), the swivel delivers high durability and is completely maintenance-free. Ideal for setups demanding flexibility in tight spaces, the 90° elbow design improves handling without compromising performance.

Applications

• High-pressure cleaning and HP guns

• Hose connection swivel joints

• Hydraulic and pneumatic tools

• Tangle-free hose and boom systems

• Industrial wash bays and machinery

Features

• Material: Stainless steel & nickel-plated brass

• Thread IN: 3/8" NPTM

• Thread S1: 1/4"

• Configuration: 90° elbow swivel

• Overall Length: 1.95"

• Nominal Width (NW): 1/8”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Bearing: 1x thrust ball bearing

• Seal System: O-ring NBR (optional EPDM or FKM)

• Performance: Maintenance-free with low torque

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTM

S1: 1/4"

Nominal Width (NW): 1/8”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 1.95"

Lenght 2 (L2): 0.43"

Diameter 1 (D1): 0.27"

Diameter 2 (D2): 0.29"

Diameter 3 (D3): 0.37"

Weight: 5.5 oz

The Mosmatic DGK Swivel 32.389 – 90 Degrees is a precision-engineered, high-performance swivel designed for use in HP-guns, hydraulic systems, and hose connections. Featuring a nickel-plated brass and stainless steel construction, this swivel is built to handle demanding high-pressure environments while enabling tangle-free, flexible operation.

Its 90-degree configuration makes it ideal for compact spaces, while live rotation at max pressure ensures optimal efficiency. The swivel includes 1x thrust ball bearing and a NBR O-ring seal system (upgradeable to EPDM or FKM) for long-term, maintenance-free performance.

Applications

• High-pressure spray guns (HP-Guns)

• Hose connection swivels

• Hydraulic tools and systems

• Tangle-free hose routing

• Industrial and automotive washing equipment

Features

• Material: Stainless steel & nickel-plated brass

• Thread IN: 1/4" NPTM

• Thread S1: 3/8"

• Elbow Configuration: 90°

• Overall Length: 2.10"

• Nominal Width (NW): 1/4”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Seal System: O-ring NBR (optional EPDM/FKM)

• Bearing: 1x thrust ball bearing

• Maintenance: Fully maintenance-free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTM

S1: 3/8"

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 2.10"

Lenght 2 (L2): 0.39"

Diameter 1 (D1): 0.40"

Diameter 2 (D2): 0.42"

Diameter 3 (D3): 0.54"

Weight: 6.0 oz

The Mosmatic DGK Swivel 32.382 – 90 Degrees is a durable, high-pressure swivel elbow designed for hose connections, HP guns, and hydraulic applications where space is tight and flexibility is essential.

With 1/4" NPTM inlet and 5/16" S1, this swivel supports live rotation under 4000 PSI, thanks to its sealed stainless steel thrust bearing and NBR O-ring seal. Its compact, 90-degree design ensures smooth operation and hose protection in dynamic environments.

Applications

• High-pressure hose swivels

• Pressure washer guns

• Ceiling booms and hydraulic arms

• Tangle-free hose routing

Key Features

• Material: Stainless steel/brass, nickel-plated

• Thread IN: 1/4" NPTM

• Elbow Style: 90° angle

• Thread S1: 5/16"

• Overall Length: 1.97"

• Nominal Width: 7/32”

• Wrench Size: 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Seal: O-ring NBR (optional EPDM or FKM)

• Bearing: 1x thrust ball bearing

• Maintenance: Maintenance-free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTM

S1: 5/16"

Nominal Width (NW): 7/32”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 1.97"

Lenght 2 (L2): 0.39"

Diameter 1 (D1): 0.33"

Diameter 2 (D2): 0.34"

Diameter 3 (D3): 0.44"

Weight: 5.3 oz

The Mosmatic DGK Swivel 32.381 – 90 Degrees is a compact, 90° elbow swivel engineered for high-pressure hose connections, HP-guns, and hydraulic systems. Its nickel-plated brass and stainless steel construction provides superior durability in demanding environments.

This swivel features a thrust ball bearing, NBR O-ring seal (optional EPDM or FKM), and live rotation under pressure, allowing tangle-free operation. Ideal for installations requiring a 90-degree angle in tight spaces.

Applications

• HP-guns and pressure washing equipment

• Tangle-free hose applications

• Hydraulic hose connections

• Compact swivel installations

Key Features

• Material: Brass & stainless steel, nickel-plated

• Thread IN: 1/4" NPTM

• Elbow Style: 90° angle

• Overall Length: 1.95"

• Nominal Width: 1/8”

• Wrench Size: 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Seal: O-ring NBR (optional EPDM or FKM)

• Bearing: 1x thrust ball bearing

• Maintenance: Maintenance-free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTM

S1: 1/4"

Nominal Width (NW): 1/8”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 1.95"

Lenght 2 (L2): 0.39"

Diameter 1 (D1): 0.27"

Diameter 2 (D2): 0.29"

Diameter 3 (D3): 0.37"

Weight: 5.3 oz

The Mosmatic DGK Swivel 32.189 is a robust and compact swivel crafted from nickel-plated brass and stainless steel, engineered for smooth and tangle-free operation in high-pressure gun and hydraulic hose systems. This high-performance swivel delivers live rotation under maximum pressure and is maintenance-free, making it perfect for both industrial and commercial applications.

Equipped with a thrust ball bearing and O-ring NBR seal system (upgradeable to EPDM or FKM), this swivel is designed for very low torque operation, providing consistent, easy rotation even at full pressure.

Applications

• High-pressure cleaning guns

• Hose and hydraulic line connections

• Ceiling booms and hose reels

• Tangle-free hose assemblies

• Industrial washdown systems

Key Features

• Model: Mosmatic DGK 32.189

• Material: Stainless steel and nickel-plated brass

• Thread IN (G1): 3/8” NPTM

• Seal Type: O-ring NBR (optional EPDM or FKM)

• Bearing: 1x thrust ball bearing

• Rotation: Live rotation under full pressure

• Design: Compact, corrosion-resistant, maintenance-free

• Overall Diameter: 0.40”

• Overall Length: 2.76”

• Nominal Width (NW): 1/4”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTM

S1: 3/8"

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 2.76"

Lenght 2 (L2): 0.43"

Diameter 1 (D1): 0.40"

Diameter 2 (D2): 0.42"

Diameter 3 (D3): 0.54"

Weight: 4.8 oz

The Mosmatic DGK Swivel 32.182 is a premium-quality swivel made of nickel-plated brass and stainless steel, designed for high-efficiency use in high-pressure guns, hydraulic connections, and hose systems. With a compact design and live rotation under full pressure, this swivel enables tangle-free operation and optimal performance in demanding environments.

Featuring a thrust ball bearing and an O-ring NBR seal system (with optional EPDM or FKM), it ensures smooth operation with very low torque, even at high pressures. Its sealed stainless steel bearings offer long-lasting durability with no maintenance required.

Applications

• High-pressure cleaning guns

• Hydraulic and pneumatic hose systems

• Ceiling booms and hose reels

• Tangle-free hose setups

• Industrial and commercial cleaning systems

Key Features

• Model: Mosmatic DGK 32.182

• Material: Nickel-plated brass and stainless steel

• Thread IN (G1): 3/8” NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing: 1x thrust ball bearing

• Design: Maintenance-free, compact size

• Rotation: Live rotation under max pressure

• Overall Diameter: 0.33”

• Overall Length: 2.68”

• Nominal Width (NW): 7/32”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTM

S1: 5/16"

Nominal Width (NW): 7/32”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 2.68"

Lenght 2 (L2): 0.43"

Diameter 1 (D1): 0.33"

Diameter 2 (D2): 0.34"

Diameter 3 (D3): 0.44"

Weight: 3.3 oz

The Mosmatic DGK Swivel 32.181 is a durable and compact stainless steel/brass swivel engineered for high-performance applications in high-pressure guns, hydraulic systems, and hose connections. This nickel-plated swivel allows live rotation at maximum pressure, making it perfect for tangle-free and efficient hose management.

With a robust thrust ball bearing and an O-ring NBR seal system (with optional EPDM or FKM), this swivel is built for reliability and longevity in both industrial and commercial environments. Its maintenance-free design ensures smooth operation under demanding conditions.

Applications

• High-pressure spray guns

• Hydraulic and pneumatic hose connections

• Hose reels and ceiling booms

• Tangle-free hose setups

• Industrial cleaning and washdown systems

Key Features

• Model: Mosmatic DGK 32.181

• Material: Nickel-plated brass and stainless steel

• Thread IN (G1): 3/8” NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing: 1x thrust ball bearing

• Design: Compact, maintenance-free

• Live Rotation: Operates at max pressure

• Overall Diameter: 0.27”

• Overall Length: 2.59”

• Nominal Width (NW): 1/8”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTM

S1: 1/4"

Nominal Width (NW): 1/8”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 2.59"

Lenght 2 (L2): 0.43"

Diameter 1 (D1): 0.27"

Diameter 2 (D2): 0.29"

Diameter 3 (D3): 0.37"

Weight: 3.2 oz

The Mosmatic DGK Swivel 32.153 is a compact, high-performance swivel engineered for high-pressure spray guns, hose connections, hydraulic systems, and tangle-free hose applications. Constructed from nickel-plated brass with stainless steel components, it delivers excellent corrosion resistance and long-term durability.

Equipped with a thrust ball bearing and O-ring NBR seal system (optional EPDM or FKM), this swivel enables live rotation at maximum pressure with very low torque. The maintenance-free design ensures reliability and smooth performance in even the most demanding settings.

Applications

• High-pressure spray guns

• Hose connection systems

• Hydraulic line installations

• Ceiling booms and wash bays

• Industrial and automotive cleaning setups

Key Features

• Model: Mosmatic DGK 32.153

• Material: Nickel-plated brass and stainless steel

• Thread IN: 3/8” NPTM

• Thread OUT: 3/8” NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearings: 1x thrust ball bearing

• Design: Compact, corrosion-resistant, low-torque rotation

• Live Rotation: At full operating pressure

• Overall Length: 2.13"

• Nominal Width (NW): 1/4”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTM

Thread In: G1 3/8" NPTM

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.94"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.13"

Lenght 2 (L2): 0.43"

Lenght 3 (L3): 0.47"

Weight: 4.2 oz

The Mosmatic DGK Swivel 32.089 is a compact, high-performance brass and stainless steel swivel designed for high and low-pressure cleaning, hose connections, hydraulic setups, and tangle-free hose applications. Engineered with live rotation under maximum pressure, this swivel offers superior functionality and a long-lasting, maintenance-free design.

The unit features a thrust ball bearing for smooth operation and an O-ring NBR seal system, with optional EPDM or FKM materials for enhanced chemical resistance. Its nickel-plated finish ensures durability and corrosion resistance in demanding environments.

Applications

• High-pressure guns and lances

• Hydraulic and pneumatic hose connections

• Hose reels and ceiling booms

• Industrial cleaning systems

• Tangle-free hose management

Key Features

• Model: Mosmatic DGK 32.089

• Material: Nickel-plated brass and stainless steel

• Thread IN (G1): 1/4” NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing: 1x thrust ball bearing

• Rotation: Live under maximum pressure

• Maintenance-Free: Sealed stainless steel bearing

• Overall Diameter: 0.40”

• Overall Length: 2.70”

• Nominal Width (NW): 1/4”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTM

S1: 3/8"

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 2.70"

Lenght 2 (L2): 0.39"

Diameter 1 (D1): 0.40"

Diameter 2 (D2): 0.42"

Diameter 3 (D3): 0.54"

Weight: 2.6 oz

The Mosmatic DGK Swivel 32.082 is a compact and durable nickel-plated brass and stainless steel swivel engineered for high-pressure guns, hydraulic systems, hose connections, and tangle-free applications. Designed for smooth rotation under pressure, this swivel delivers maintenance-free performance and exceptional durability.

Built with a thrust ball bearing and a robust O-ring NBR seal system (with optional EPDM or FKM), the DGK 32.082 enables live rotation even at maximum pressure, offering exceptional maneuverability for demanding cleaning and industrial environments.

Applications

• High-pressure guns and lances

• Hydraulic hose connections

• Ceiling booms and hose reels

• Tangle-free hose systems

• Compact industrial machinery

Key Features

• Model: Mosmatic DGK 32.082

• Material: Nickel-plated brass and stainless steel

• Thread IN (G1): 1/4” NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing: 1x thrust ball bearing

• Low Torque: Smooth rotation under pressure

• Maintenance-Free: Sealed system, long service life

• Diameter: 0.33”

• Overall Length: 2.63”

• Nominal Width (NW): 7/32”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTM

S1: 5/16"

Nominal Width (NW): 7/32”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 2.63"

Lenght 2 (L2): 0.39"

Diameter 1 (D1): 0.33"

Diameter 2 (D2): 0.34"

Diameter 3 (D3): 0.44"

Weight: 2.8 oz

The Mosmatic DGK Swivel 32.081 is a high-performance nickel-plated brass and stainless steel swivel engineered for hose connections, HP guns, hydraulics, and tangle-free operations. Its compact design offers live rotation at full pressure, reducing torque and enhancing maneuverability in demanding cleaning and industrial environments.

Designed for durability and minimal maintenance, the swivel features a stainless steel thrust ball bearing and a reliable O-ring NBR seal system, with optional upgrades to EPDM or FKM. Perfect for high and low-pressure applications, the DGK 32.081 ensures smooth, low-resistance rotation for optimal performance.

Applications

• High-pressure spray guns

• Hydraulic and pneumatic hose assemblies

• Ceiling booms and hose reels

• Compact cleaning tools

• Tangle-free hose management

Key Features

• Model: Mosmatic DGK 32.081

• Material: Nickel-plated brass and stainless steel

• Thread IN (G1): 1/4” NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing Type: 1x thrust ball bearing

• Compact & Lightweight: Ideal for space-limited tools

• Maintenance-Free: Sealed, long-lasting performance

• Live Rotation: Smooth, low-torque operation at high pressure

• Diameter: 0.27”

• Overall Length: 2.55”

• Nominal Width (NW): 1/8”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTM

S1: 1/4"

Nominal Width (NW): 1/8”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 2.55"

Lenght 2 (L2): 0.39"

Diameter 1 (D1): 0.27"

Diameter 2 (D2): 0.29"

Diameter 3 (D3): 0.37"

Weight: 2.8 oz

The Mosmatic DGK Swivel 32.053 is a high-performance swivel designed for tangle-free hose connections, high-pressure spray guns, and hydraulic applications. Built from nickel-plated brass and stainless steel, it offers exceptional durability and corrosion resistance in compact and demanding environments.

This swivel includes 1x thrust ball bearing and an O-ring NBR seal system (optional EPDM or FKM), delivering smooth, low-torque rotation under full pressure. With a maintenance-free design, it's ideal for use in high-pressure cleaning systems, industrial hydraulics, and hose management setups requiring reliable swivel action.

Applications

• High-pressure spray guns and cleaning equipment

• Hydraulic systems

• Hose and boom connections

• Tangle-free hose operation

• Industrial wash bays and automotive shops

Key Features

• Model: Mosmatic DGK 32.053

• Material: Nickel-plated brass with stainless steel components

• Thread IN: 1/4” NPTM

• Thread OUT: 3/8” NPTM

• Seal Type: O-ring NBR (optional EPDM or FKM)

• Bearings: 1x thrust ball bearing

• Design: Compact, corrosion-resistant, low-torque

• Live Rotation: At full operating pressure

• Overall Length: 2.09"

• Nominal Width (NW): 1/4”

• Wrench Size (SW): 0.94”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTM

Thread In: G1 3/8" NPTM

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.94"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.09"

Lenght 2 (L2): 0.39"

Lenght 3 (L3): 0.39"

Weight: 3.9 oz