Mosmatic

The Mosmatic DGV Hydraulic 32.926 is a high-performance, brass, nickel-plated hydraulic swivel engineered for use in high-pressure hose connections, HP-Guns, and hydraulic applications. Designed with 3/4" JIC Male to Female threads, this compact and durable fitting supports live rotation under full pressure, improving hose maneuverability and protecting against wear from twisting. It features a single thrust ball bearing, O-ring NBR seal system (upgradable to EBDM or FKM), and stainless steel internals, offering exceptional corrosion resistance and maintenance-free performance.

Applications

• High-pressure gun and hose systems

• Hydraulic lines and fittings

• Industrial pressure washers

• Commercial cleaning equipment

• Tangle-free hose reel assemblies

Features

• Type: Hydraulic Swivel Connector

• Material: Brass, nickel plated with stainless steel internals

• Thread IN: 3/4" JIC Male

• Thread OUT: 3/4" JIC Female

• Overall Length: 2.71”

• Nominal Width (NW): 3/8”

• Wrench Size (SW): 1.00”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Seal: NBR O-ring (optional EBDM/FKM)

• Benefits: Corrosion resistant, low-torque rotation, and maintenance free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"JIC M

Thread Out: G2  3/4" JIC F 

Nominal Width (NW): 3/8”

Wrench Size 1 (SW1): 1.00"

Wrench Size 2 (SW2): 1.00"

Length 1 (L1) (overall length) : 2.71"

Length 2 (L2): 0.67"

Weight: 6.0 oz

Maximize the durability and efficiency of your Mosmatic swivel with the Mosmatic Seal Kit 36.906 - NW 1/4”. This carbide seal kit, complete with adhesive, is engineered for DYL, DYG, DYF, DYW, DYCI, DYDI, DYT, and DYU Swivels with a nominal width of ¼ inch. Built for extreme performance, it withstands high pressure, high RPM, and self-rotating operations in the most demanding environments. Ideal for tire cleaners, surface cleaners, wall cleaners, and parts washers, this replacement kit ensures long-lasting, leak-free operation in industrial and professional cleaning systems.

Surface cleaners, parts washer, tire cleaners, high pressure, self rotating applications

• Flange for easy installation
• Seal failure warning, through week holes
• Maintenance free
• Carbide seal systems

DYF-90º M22x1.5M-G3/8"M

Technical data

• Pressure: 4000 psi(27.5 MPa)
• Temperature: 4000 psi(27.5 MPa)
• Temperature: 250 °F (max. 2’000 rpm)
• RPM: max. 2’000 rpm)
• Body: DYF: brass, nickel plated, DYFI: Stainless steel
• Inner part: Stainless steel
• Seal: carbide
• Bearing: 2x radial ball bearings, 1x thrust ball bearing
• Throughput: pH 3-12
• Medium: filtered 10 microns, compressed air (290 psi)

The Mosmatic DKS Swivel Coupling 70.154 is a high-performance swivel engineered for high-pressure cleaning, hose assemblies, and quick coupling systems. Built from durable nickel-plated brass, this swivel coupling is corrosion-resistant and designed for long-term reliability in heavy-duty industrial and commercial applications.

Equipped with a single thrust ball bearing and an advanced ceramic seal system, it ensures smooth rotation and a dependable seal under high pressure. The flange design enables simple, stable installation, while integrated weep holes act as a visual alert in case of seal failure, supporting preventive maintenance.

This model features a Quick Connect Thread In of M22x1.5 F and a Thread Out of 3/8” NPTF. It offers a nominal width of ¼”, supports up to 3600 PSI, and operates effectively at temperatures up to 250°F and speeds up to 30 RPM. Compatible with a variety of media, it handles pH levels from 3–12 and 10-micron filtered compressed air up to 290 PSI.

Applications

• High-pressure cleaning and spraying equipment

• Industrial hose connection systems

• Surface cleaners and rotary spray tools

• Car wash and auto detailing systems

• Quick-connect hose assemblies

• Pneumatic and air-driven tool applications

Features

• Nickel-plated brass body for superior durability

• Long-life ceramic seal system for leak resistance

• Smooth rotation with single thrust ball bearing

• Flange for secure and simple installation

• Seal failure warning via integrated weep holes

• Thread In: M22x1.5 F | Thread Out: 3/8” NPTF

• Nominal Width (NW): ¼”

• Max Pressure: 3600 PSI

• Max Temperature: 250°F

• Max RPM: 30

• Overall Diameter: 1.34” | Overall Length: 2.08”

• Media compatibility: pH 3–12, 10-micron filtered air (290 PSI)

Specs

Pressure: 3600 psi

Temperature: 250°

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 M22X1.5F

Thread Out: G2 3/8"NPTF

Nominal Width (NW): ¼”

Wrench Size 1 (SW1): 0.87"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.08

Length 2 (L2): 

Weight: 3.7 oz

The Mosmatic 58.163 DYF is a high-pressure brass swivel featuring a 3/8" NPTF inlet and a G3/8" BSPP (male) outlet—making it ideal for connecting NPT-threaded lines to BSP-threaded tools or accessories.

This 360° maintenance-free swivel supports up to 4000 psi and includes a carbide seal, sealed bearing system, and weep holes for early detection of seal wear. Its nickel-plated brass housing ensures excellent corrosion resistance in demanding cleaning environments.

Applications

• Pressure washers with BSPP connections

• Surface cleaners and wash booms

• Car wash arms and rotating nozzles

• Industrial fluid systems needing NPT-to-G thread

Features

• 360° full rotation

• Carbide seal with weep hole alert

• Nickel-plated brass body for corrosion resistance

• Maintenance-free, sealed bearing system

• Rated up to 4000 psi

• Ideal for NPT-to-BSPP transitions

Specs

Product Type: High-pressure swivel – DYF
Part Number: 58.163
Pressure: 4000 psi
Temperature: 250°F
RPM: max. 2,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: Carbide
Throughput / Medium: pH 3–12 / filtered 10 microns / compressed air (290 psi)
Thread In (G1): 3/8" NPTF
Thread Out (G2): G3/8" M
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Diameter (D): 2.36"
Length 1 (L1): 1.49"
Length 2 (L2): 0.39"
Weight: 13.2 oz

The Mosmatic WDCL Swivel 43.363 is a high-performance, nickel-plated brass swivel designed for demanding high-pressure applications. Engineered for durability and smooth operation, it features dual radial ball bearings that support higher rotational speeds and reduce wear under load. The O-ring NBR seal ensures long-lasting leak protection, while its robust build accommodates pressures up to 4000 psi and temperatures up to 250°F. With a higher max RPM of 200, this swivel is ideal for more dynamic setups in commercial and industrial cleaning systems.

Applications

• High-pressure hose reels for commercial cleaning

• Ceiling boom arms in auto wash bays and garages

• Pressure washers in industrial and mobile setups

• Car wash and detailing systems

• Equipment requiring durable high-RPM swivel connections

Key Features

• Heavy-duty brass body with nickel plating for corrosion resistance

• Dual radial ball bearings for enhanced rotation and longevity

• Thread IN: ½” NPTF | Thread OUT: ½” NPTM

• Dimensions: Height – 1.81” | Overall Length – 2.87”

• Nominal Width (NW): ½”

• Handles 4000 psi maximum pressure

• Operates at temperatures up to 250°F

• High rotational capacity: Max RPM – 200

• O-ring NBR seal for reliable, leak-free performance

Specs

Pressure: 4000 psi

Temperature: 250°

RPM: 200

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/2" NPTF

Thread Out: G2 1/2" NPTM

Nominal Width (NW): 1/2"

Wrench Size  (SW): 0.87

Height (H): 1.81

Length 1 (L1) :1.77

Length 2 (L2) (overall length): 2.87

Length 3 (L3): 1.14

Length 4 (L4) :1.97

Length 5 (L5) :0.59

Weight:15.3 oz

The Mosmatic DGK Swivel 32.549 – 90 Degrees is designed for high-performance pressure cleaning, hydraulic systems, and hose connections. Built with a durable stainless steel/brass body and nickel-plated finish, this swivel delivers exceptional corrosion resistance and longevity in industrial environments.

Featuring a thrust ball bearing and a reliable O-ring NBR seal system (optional EPDM or FKM), this swivel supports live rotation under full pressure with minimal torque. Its 90-degree compact design ensures easy integration into tight setups while keeping hoses tangle-free.

Applications

• High-pressure spray guns

• Hydraulic hose assemblies

• Wash bays and ceiling booms

• Tangle-free hose connection systems

• Industrial pressure cleaning tools

Features

• Material: Stainless steel/brass with nickel plating

• Thread IN (G1): 3/8" NPTM

• Thread OUT (G2): 3/8" NPTF

• Overall Length: 1.06"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.94"

• Maximum Pressure: 4000 PSI

• Maximum RPM: 30

• Max Temperature: 250°F

• Seal System: O-ring NBR (EPDM or FKM optional)

• Bearing System: 1x thrust ball bearing

• Design: 90° swivel for optimized directional flow

• Performance: Maintenance free, low torque, high durability

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel, Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTM

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.94"

Length 1 (L1) (overall length) : 1.06"

Lenght 2 (L2): 0.39"

Weight: 5.8 oz

The Mosmatic DGS Swivel 30.654 is a high-quality brass, nickel-plated swivel engineered for high and low-pressure cleaning, hydraulic hose connections, ceiling booms, and other industrial applications. Designed for smooth performance under pressure, it features very low torque, sealed stainless steel bearings, and maintenance-free operation.

With a robust design including 1x thrust and 1x radial ball bearing, and an O-ring NBR seal system (upgradeable to EPDM or FKM), this swivel ensures reliable rotation at high PSI, making it an ideal solution for demanding environments.

Applications

• Pressure washers and cleaning systems

• Hydraulic and pneumatic hose assemblies

• Ceiling booms and rotary arms

• Car wash equipment

• Hose reels and industrial setups

Key Features

• Model: Mosmatic DGS 30.654

• Material: Brass, nickel plated

• Thread IN (G1): 3/8” NPTF

• Thread OUT (G2): 3/8” NPTF

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearings: 1x thrust, 1x radial ball bearing

• Low Torque Operation: Smooth rotation at high pressure

• Maintenance-Free: Sealed stainless steel bearings

• Overall Diameter: 0.98”

• Overall Length: 2.71”

• Nominal Width (NW): 3/8”

• Wrench Size (SW): 0.87”

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 3/8”

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.87"

Length 1 (L1) (overall length) : 2.71"

Diameter (D) (overall diameter): 0.98"

Weight: 5.6 oz

The Mosmatic DGVI Swivel 32.778 is a durable, stainless steel swivel engineered for high-pressure hose reels, HP-Guns, and hydraulic systems. With a robust 3/8” NPTM inlet, this swivel ensures live rotation under full system pressure, helping to prevent hose tangling and improve workflow efficiency.

Designed for reliability and performance in demanding environments, it features a single thrust ball bearing, corrosion-resistant stainless steel housing, and a maintenance-free O-ring NBR seal system—with optional EPDM or FKM seals available for compatibility with specific applications.

Applications

• High-pressure hose reels

• Hydraulic and pneumatic systems

• HP-Guns and industrial sprayers

• Tangle-free hose connections

• Commercial cleaning systems

Features

• Material: Full stainless steel construction

• Thread IN (G1): 3/8” NPTM

• Overall Length: 2.90”

• Nominal Width (NW): 1/4”

• Wrench Size (SW): 0.94”

• Max Pressure: 5000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Bearing System: 1x thrust ball bearing

• Seal System: O-ring NBR (optional EPDM or FKM)

• Design: Compact, corrosion resistant, maintenance free

Specs 

Pressure: 5000 psi (35 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

D (Diameter): ø0.60"

Thread In: G1 3/8" NPTM

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.94"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.90"

Lenght 2 (L2): 0.47"

Weight: 5.1 oz

The Mosmatic 55.153 DYCI Swivel is a high-performance swivel designed for high-flow, high-pressure, self-rotating applications such as surface cleaners, spray bars, and parts washers. Crafted from stainless steel, it offers exceptional durability, chemical resistance, and smooth rotation in demanding environments.

This swivel features a triple bearing system - including two radial ball bearings and one thrust ball bearing - that ensures consistent rotational performance, even under extreme pressure and speed. A carbide seal system provides long-lasting leak protection, while integrated weep holes offer early seal failure detection, helping you maintain system integrity and avoid downtime.

Applications

• Commercial and industrial surface cleaners

• Parts washing equipment

• Rotating high-pressure cleaning systems

• Spray bars and automated cleaning tools

• Equipment operating in corrosive or high-temperature environments

Key Features

• Thread In: 3/8" NPT Female

• Thread Out: 3/8" NPT Male

• Material: Full stainless steel body and internal components

• Triple Bearing System: 2 radial + 1 thrust bearing for smooth rotation

• Seal Type: Carbide for high durability

• Weep Holes: Allow early detection of seal failure

• Max Pressure: 5000 PSI

• Temperature Tolerance: Up to 250°F

• High-Speed Rated: Handles up to 2000 RPM

• Efficient Design: Compact size and dual wrench flats for easy installation

Specs

Pressure: 5000 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Carbide
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: 3/8" NPTF
Thread Out: 3/8" NPTM
Nominal Width (NW): 1/4"
Wrench Size (SW1): 0.87"
Wrench Size (SW2): 0.63"
Diameter (D1): 2.36"
Diameter (D2): 1.10"
Length 1 (L1): 2.28"
Length 2 (L2): 1.46"
Length 3 (L3): 0.43"
Length 4 (L4): 0.12"
Weight: 23.0 oz

The Mosmatic DGE Swivel - 34.854 is a high-pressure, high-flow swivel designed for industrial and food service applications where both thrust and radial forces must be managed with precision. Constructed from nickel-plated brass with a stainless steel interior, this swivel offers excellent corrosion resistance and durability in demanding environments. The swivel includes a 1x thrust ball bearing, ensuring dependable performance, ideal for fluid transfer systems requiring strength, efficiency, and sanitation compliance.

Applications:

• Industrial high-pressure fluid and washdown systems

• Food and beverage processing equipment

• Chemical handling and sanitation systems

• Low-speed, high-pressure rotary unions

Key Features:

• Nickel-plated brass body with stainless steel internal components

• With 1x thrust ball bearing

• Designed to withstand both thrust and radial forces

• High-flow capacity with low maintenance requirements

• Corrosion-resistant for industrial and sanitary use

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM

• Nominal Width (NW): 3/4"

• Diameter: 1.97"

• Overall Length: 3.46"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF

Thread Out: G2 3/4"NPTM

Nominal Width (NW): 3/4"

Wrench Size 1 (SW1): 1.06

Wrench Size 2 (SW2): 1.57

Diameter (D): 1.97"

Length 1 (L1) (overall length): 3.46"

Length 2 (L2): 2.38

Length 3 (L3): 0.63

Weight: 27.8oz

Maintain peak performance of your Mosmatic swivel systems with the Mosmatic WDC/WDB Swivel Seal Kit 43.904. This high-quality replacement kit includes durable NBR O-rings designed specifically for WDC and WDB Swivels. Ideal for high-pressure hose reels, ceiling booms, and high-pressure cleaners, the kit ensures a reliable, leak-free seal in demanding environments. Extend the life of your equipment with this essential seal kit for professional cleaning and pressure applications.

The Mosmatic WDB Swivel 43.251 is a precision-engineered, nickel-plated brass swivel designed for high-pressure cleaning applications. Ideal for use in hose reels, ceiling booms, and pressure washers, this compact swivel features a sliding bearing for reliable, smooth rotation under load. Sealed with a durable O-ring NBR, it delivers long-lasting leak protection in tough environments. With a thread configuration of 1/4” NPTF (inlet) to 1/4” NPTM (outlet), this swivel supports up to 4000 psi, 30 RPM, and 250°F, making it a powerful solution for compact, high-pressure systems.

Applications

• High-pressure hose reels

• Overhead or wall-mounted ceiling booms

• High-pressure washers and cleaning systems

• Stationary and mobile wash bays

• Car wash equipment and service stations

Key Features

• Durable nickel-plated brass construction for corrosion protection

• Sliding bearing design for smooth and controlled rotation

• Thread IN: 1/4” NPTF | Thread OUT: 1/4” NPTM

• Compact dimensions: Height – 1.06” | Overall Length – 1.89”

• Nominal Width (NW): 1/4”

• Handles pressures up to 4000 psi

• Operates at temperatures up to 250°F

• Supports 30 RPM for low-speed, high-pressure applications

• O-ring NBR seal for reliable, leak-resistant performance

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: 30

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTF

Thread Out: G2 1/4" NPTM

Nominal Width (NW): 1/4"

Wrench Size  (SW): 0.87

Height (H): 1.06

Length 1 (L1): 1.77

Length 2 (L2) (overall length): 1.89

Length 3 (L3): 1.14

Length 4 (L4): 1.10

Length 5 (L5): 0.39

Weight:10.0 oz

The Mosmatic DXG 90° Swivel 37.463 is a high-precision nickel-plated brass swivel engineered for high-RPM, self-rotating cleaning applications. Ideal for surface cleaners, parts washers, and tire cleaning systems, this 90-degree swivel is built to deliver exceptional durability and smooth operation in tough environments. It features a triple bearing system with two radial ball bearings and one thrust ball bearing for consistent, stable rotation. The ceramic seal system ensures extended leak-free performance under high-pressure conditions. With a corrosion-resistant finish, bulkhead fitting for secure mounting, and a maintenance-free design, this swivel is ready for demanding professional use.

Applications

• Surface cleaners

• Parts washers

• Tire and wheel cleaning tools

• High-RPM self-rotating cleaning equipment

• Commercial and industrial pressure washing

Key Features

• Nickel-plated brass body for excellent corrosion resistance

• 90-degree configuration for compact or angular setups

• Triple bearing system: 2x radial, 1x thrust ball bearing

• Ceramic seal system for long-lasting, leak-free performance

• Designed for high-RPM, self-rotating applications

• Bulkhead fitting for secure mounting

• Maintenance-free operation

• Thread IN: 3/8" NPTF | Thread OUT: G3/8" M

• Max Pressure: 2500 PSI (17 MPa)

• Max RPM: 2000

• Temperature Range: 40°F – 250°F

• Overall Diameter: 1.34”

• Overall Length: 3.30”

• Nominal Width (NW): 1/4”

• Wrench Size (SW): 0.87”

Specs 

Pressure: 2500 psi (17 MPa)

Temperature: 40°- 250°

RPM: max 2,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: Ceramic

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8” NPTF

Thread Out: G2 G3/8” M

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Wrench Size 3 (SW3): 1.34"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 3.30

Length 2 (L2): 0.39

Weight: 13.4 oz

The Mosmatic DXG Swivel 37.163 is a premium brass swivel with a corrosion-resistant nickel-plated finish, engineered for high-RPM, self-rotating cleaning systems. Designed for use in surface cleaners, parts washers, and tire cleaning equipment, this swivel delivers smooth operation, precision performance, and long-lasting durability. It features a triple bearing system—two radial ball bearings and one thrust ball bearing—for optimal rotation stability. The integrated ceramic seal system ensures leak-free reliability even under high pressure. With a bulkhead fitting for secure mounting and a maintenance-free design, it's built for industrial-grade performance.

Applications

• Surface cleaners

• Parts washers

• Tire and wheel cleaning systems

• High-RPM self-rotating tools

• Industrial and commercial pressure washing systems

Key Features

• Brass construction with corrosion-resistant nickel plating

• Triple bearing system: 2x radial, 1x thrust ball bearing

• Ceramic seal system for extended leak protection

• Designed for high-RPM, self-rotating cleaning applications

• Maintenance-free performance in demanding environments

• Bulkhead fitting for secure, fixed installation

• Thread IN: 3/8" NPTF | Thread OUT: G3/8” M

• Max Pressure: 2500 PSI (17 MPa)

• Max RPM: 2000

• Temperature Range: 40°F – 250°F

• Overall Diameter: 1.34”

• Overall Length: 3.14”

• Nominal Width (NW): 1/4”

• Wrench Size (SW): 0.87”

Specs 

Pressure: 2500 psi (17 MPa)

Temperature: 40°- 250°

RPM: max 2,000 rpm

Material Type: Brass, Nicket plated

Inner Part: Stainless Steel

Seal: Ceramic

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8” NPTF

Thread Out: G2 G3/8”M

Nominal Width (NW): 1/4”

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Wrench Size 3 (SW3): 1.34"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 3.14"

Length 2 (L2): 0.39"

Weight: 9.7 oz